• Foundation
  • 15 practice questions

Final self-assessment: Units and measurement

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions on units and measurement first, then check your answers and read each explanation. The questions follow the lessons in order - questions 1-3: lesson 1 (What is measurement?); questions 4-6: lesson 2 (Fundamental and derived units); questions 7-9: lesson 3 (Measuring length, mass and time); questions 10-12: lesson 4 (Significant figures and errors); questions 13-15: lesson 5 (Prefixes, conversions and dimensions). Revisit a lesson for any question you missed.

Final self-assessment

  1. 1. Which of these is NOT a physical quantity?

    1. Speed
    2. Force
    3. Kindness
    4. Temperature
    Show answer

    Answer: C. Speed, force and temperature can all be measured with instruments. Kindness cannot be measured, so it is not a physical quantity.

  2. 2. A runner covers 1.25 km and then a further 750 m. What total distance did she run, in metres?

    1. 875 m
    2. 2000 m
    3. 1325 m
    4. 2750 m
    Show answer

    Answer: B. Convert first: 1.25 km = 1.25 × 1000 = 1250 m. Total = 1250 + 750 = 2000 m.

  3. 3. Which property must a good standard unit have?

    1. It is well defined, the same everywhere and does not change
    2. It is based on the size of the person measuring
    3. It is changed every year to match new instruments
    4. It is different in each country
    Show answer

    Answer: A. A standard unit is useful only if everyone gets the same answer: it must be well defined, the same for everyone and unchanging.

  4. 4. Work = force × distance. What is the joule in SI base units?

    1. kg m² s⁻²
    2. kg m s⁻²
    3. kg m² s⁻¹
    4. kg m⁻¹ s⁻²
    Show answer

    Answer: A. 1 J = 1 N × 1 m = (kg m s⁻²) × m = kg m² s⁻². (kg m s⁻² is the newton and kg m⁻¹ s⁻² the pascal.)

  5. 5. Which list contains only SI base units?

    1. metre, newton, second, ampere
    2. metre, kelvin, mole, candela
    3. kilogram, joule, kelvin, mole
    4. second, pascal, candela, ampere
    Show answer

    Answer: B. Metre, kelvin, mole and candela are all base units. Each other list contains a derived unit: newton, joule or pascal.

  6. 6. Pressure = force ÷ area. What is the pascal in SI base units?

    1. kg m s⁻²
    2. kg m² s⁻²
    3. kg m⁻¹ s⁻²
    4. kg m⁻² s⁻²
    Show answer

    Answer: C. 1 Pa = 1 N/m² = (kg m s⁻²) ÷ m² = kg m⁻¹ s⁻².

  7. 7. A screw gauge has a pitch of 0.5 mm and 50 circular divisions. The main scale reads 2.5 mm and the circular scale reads 36. What is the reading?

    1. 2.536 mm
    2. 2.68 mm
    3. 3.22 mm
    4. 2.86 mm
    Show answer

    Answer: D. Least count = 0.5 ÷ 50 = 0.01 mm. Reading = 2.5 + 36 × 0.01 = 2.5 + 0.36 = 2.86 mm.

  8. 8. A vernier callipers (least count 0.01 cm) has a zero error of +0.03 cm. The main scale reads 5.2 cm and the 4th vernier division coincides. What is the true length?

    1. 5.27 cm
    2. 5.24 cm
    3. 5.21 cm
    4. 5.23 cm
    Show answer

    Answer: C. Observed reading = 5.2 + 4 × 0.01 = 5.24 cm. A positive zero error is subtracted: 5.24 − 0.03 = 5.21 cm.

  9. 9. In a vernier callipers, 1 main scale division is 1 mm and 20 vernier divisions equal 19 main scale divisions. What is the least count?

    1. 0.005 cm
    2. 0.05 cm
    3. 0.095 cm
    4. 0.01 cm
    Show answer

    Answer: A. 1 VSD = 19 ÷ 20 = 0.95 mm. Least count = 1 MSD − 1 VSD = 1 − 0.95 = 0.05 mm = 0.005 cm.

  10. 10. Multiply 3.6 by 2.14 and give the answer with the correct number of significant figures.

    1. 7.704
    2. 7.70
    3. 8
    4. 7.7
    Show answer

    Answer: D. 3.6 × 2.14 = 7.704. In multiplication keep the fewest significant figures, which is 2 (from 3.6), so the answer is 7.7.

  11. 11. The true length of a rod is 80.0 cm and a student measures 81.2 cm. What is the percentage error?

    1. 1.2%
    2. 1.5%
    3. 15%
    4. 0.015%
    Show answer

    Answer: B. Absolute error = 81.2 − 80.0 = 1.2 cm. Percentage error = (1.2 ÷ 80.0) × 100 = 1.5%.

  12. 12. How many significant figures are there in 0.03040?

    1. 2
    2. 4
    3. 3
    4. 6
    Show answer

    Answer: B. The leading zeros do not count. 3, the 0 between 3 and 4, 4, and the trailing 0 after the decimal point all count: 4 figures.

  13. 13. Express a density of 2.5 g/cm³ in kg/m³.

    1. 25 kg/m³
    2. 250 kg/m³
    3. 25 000 kg/m³
    4. 2500 kg/m³
    Show answer

    Answer: D. 1 g/cm³ = 10⁻³ kg ÷ 10⁻⁶ m³ = 1000 kg/m³. So 2.5 g/cm³ = 2.5 × 1000 = 2500 kg/m³.

  14. 14. A train runs at 108 km/h. What is its speed in m/s?

    1. 30 m/s
    2. 388.8 m/s
    3. 60 m/s
    4. 10.8 m/s
    Show answer

    Answer: A. Multiply by 5/18: 108 × 5/18 = 30 m/s.

  15. 15. In the equation x = At + Bt², x is a distance in metres and t a time in seconds. By the principle of homogeneity, what are the dimensions of B?

    1. [L T⁻¹]
    2. [L T²]
    3. [L T⁻²]
    4. [L]
    Show answer

    Answer: C. Every term must have the dimensions of x, which is [L]. So Bt² = [L], giving B = [L] ÷ [T²] = [L T⁻²], the dimensions of acceleration.

Privacy · Terms · Refunds · Delivery