Revision notes

Work Energy and Power: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Work in physics

W = F d cos θ. Unit: joule (1 J = 1 N m). Perpendicular force does zero work.

— Formula
  • Work needs both force and displacement.
  • W = F d cos θ, measured in joules.
  • Work can be positive, negative or zero.
Read the full lesson

Lesson 2

Kinetic and potential energy

KE = ½mv². PE = mgh. Double the speed, four times the KE.

— Formulas
  • Energy is the capacity to do work, measured in joules.
  • KE = ½mv² depends on the square of speed.
  • PE = mgh depends on height.
Read the full lesson

Lesson 3

Conservation of energy

Energy is conserved. For free fall: mgh = ½mv², so v = √(2gh).

— Remember
  • Total energy stays constant; forms change.
  • In free fall, PE lost = KE gained.
  • v = √(2gh) for a body dropped from height h.
Read the full lesson

Lesson 4

Power and units of energy

P = W ÷ t (watt = joule per second). 1 kWh = 3.6 × 10⁶ J. 1 hp ≈ 746 W.

— Remember
  • Power is the rate of doing work; unit watt = J/s.
  • kWh is a unit of energy, not of power.
  • P = F × v for steady motion.
Read the full lesson

Lesson 5

Efficiency and mixed problems

Efficiency = useful output ÷ total input × 100%. Work done = change in kinetic energy.

— Remember
  • Efficiency is always less than 100% for real machines.
  • Net work = change in KE.
  • Check units: joule for energy, watt for power, kWh for billing.
Read the full lesson

Lesson 6

Simple machines: levers, inclined planes and pulleys

Ideal behaviour of simple machines
MachineIdeal mechanical advantage
LeverEffort arm ÷ load arm
Inclined planeLength of slope ÷ height
Single fixed pulley1 (only changes the direction of the force)
Single movable pulley2 (the effort moves twice as far as the load)

Mechanical advantage = load ÷ effort. Efficiency = (MA ÷ VR) × 100%. A machine trades force for distance; it never gives more work than it receives.

— Rule to remember
  • A simple machine changes the size or direction of a force, not the amount of work.
  • A larger mechanical advantage means a smaller effort, but over a larger distance.
  • Real machines have an efficiency below 100% because of friction.
  • Lever MA = effort arm ÷ load arm; inclined plane MA = length ÷ height.
Read the full lesson

Lesson 7

Elastic potential energy: springs and stretched objects

F = k x and U = ½ k x². The energy depends on the square of the stretch, whether the spring is stretched or compressed.

— Rule to remember
  • Hooke's law: F = kx within the elastic limit.
  • The spring constant k is measured in N/m.
  • Stored energy is ½kx², equal to the area under the force-extension graph.
  • Doubling the stretch quadruples the stored energy.
Read the full lesson

Lesson 8

Sources of energy and how they are converted

How common power sources work
SourceChain of energy conversions
Thermal power stationChemical energy of fuel → heat → kinetic energy of steam → kinetic energy of turbine → electrical energy
Hydroelectric stationGravitational potential energy of water → kinetic energy of falling water → kinetic energy of turbine → electrical energy
Wind turbineKinetic energy of moving air → kinetic energy of blades → electrical energy
Solar cellLight energy → electrical energy

Energy is never lost, but it is changed into less useful forms. The overall efficiency of a chain is the product of the efficiencies of its stages.

— Rule to remember
  • Fossil fuels and nuclear fuels are non-renewable; sunlight, wind, water and biomass are renewable.
  • Every power source is a chain of energy conversions.
  • Overall efficiency is the product of the stage efficiencies.
  • Hydroelectric power in watts is m g h per second, multiplied by the efficiency.
Read the full lesson

Lesson 9

The work-energy theorem step by step: stopping distances and speeding up

Net work = ΔKE. Brakes and friction do negative work. For the same braking force, stopping distance is proportional to v².

— Rule to remember
  • The work-energy theorem links force and distance directly to speed.
  • Add the work of all forces, with correct signs, before comparing with the change in KE.
  • Stopping distance grows as the square of the speed.
  • The theorem needs no acceleration or time.
Read the full lesson

Privacy · Terms · Refunds · Delivery