• Foundation
  • About 13 min
  • 5 practice questions

Sources of energy and how they are converted

Name renewable and non-renewable sources, trace the chain of conversions in power stations, and compute the output of a simple hydroelectric plant.

If something looks wrong, please tell us.

Every machine in the world needs energy, and it has to come from somewhere. The law of conservation of energy says that energy is never lost, but it also says that energy only changes its form. What we use up is not energy itself but energy in a useful, concentrated form. This lesson looks at where such energy comes from and how it is changed into electricity.

Renewable and non-renewable sources

  • Non-renewable sources are limited and take millions of years to form: coal, petroleum and natural gas (the fossil fuels). Nuclear fuels such as uranium are also available in limited amounts.
  • Renewable sources are replaced naturally as we use them: sunlight, wind, flowing and falling water, the tides, biomass (such as wood and plant waste) and heat from inside the Earth.
  • Fossil fuels are the stored energy of ancient plants and animals, and that energy came originally from sunlight. Burning them also releases carbon dioxide.

Chains of energy conversion

How common power sources work
SourceChain of energy conversions
Thermal power stationChemical energy of fuel → heat → kinetic energy of steam → kinetic energy of turbine → electrical energy
Hydroelectric stationGravitational potential energy of water → kinetic energy of falling water → kinetic energy of turbine → electrical energy
Wind turbineKinetic energy of moving air → kinetic energy of blades → electrical energy
Solar cellLight energy → electrical energy

At each step some energy is wasted, usually as heat. If the stages have efficiencies e₁, e₂, e₃, the overall efficiency is their product e₁ × e₂ × e₃.

Worked examples (g = 10 m/s²)

Example 1 (overall efficiency). In a thermal power station the boiler converts 80% of the fuel's energy to steam energy, the turbine converts 50% of that to rotation, and the generator converts 90% of that to electricity. The overall efficiency is 0.8 × 0.5 × 0.9 = 0.36, or 36%. The percentages are illustrative values for practice.

Example 2 (hydroelectric power). Water falls through a height of 20 m at a rate of 100 kg every second. Each second, the loss of potential energy is m g h = 100 × 10 × 20 = 20 000 J. This is a power of 20 000 W = 20 kW. If the plant converts 60% of it to electricity, the electrical output is 0.6 × 20 = 12 kW.

Example 3 (energy over time). A generator of 12 kW runs for 5 hours. The energy supplied is 12 × 5 = 60 kWh. In joules, this is 60 × 3.6 × 10⁶ = 2.16 × 10⁸ J.

Example 4 (the cost of wasted energy). A bulb is supplied with 100 J of electrical energy every second and gives out 10 J as light and 90 J as heat. Its efficiency is 10 ÷ 100 = 10%. A better lamp that gives 30 J of light for the same 100 J has an efficiency of 30%, so it needs only one-third of the electrical energy to give the same light.

Example 5 (conserved, but less useful). When a stone falls and hits the ground, its kinetic energy becomes heat and sound in the ground and the stone. The energy is not destroyed, but it is now spread out as heat among many particles, and we cannot easily use it again. That is why we talk about 'saving' energy: to keep the useful forms from turning into the spread-out form.

Energy is never lost, but it is changed into less useful forms. The overall efficiency of a chain is the product of the efficiencies of its stages.

— Rule to remember

Key takeaways

  • Fossil fuels and nuclear fuels are non-renewable; sunlight, wind, water and biomass are renewable.
  • Every power source is a chain of energy conversions.
  • Overall efficiency is the product of the stage efficiencies.
  • Hydroelectric power in watts is m g h per second, multiplied by the efficiency.

Check your understanding

  1. 1. Which of these is a renewable source of energy?

    1. coal
    2. natural gas
    3. wind
    4. petroleum
    Show answer

    Answer: C. Wind is replaced naturally and does not run out. Coal, petroleum and natural gas are fossil fuels and are non-renewable.

  2. 2. In a hydroelectric station the first energy conversion is from:

    1. thermal energy of steam to electrical energy
    2. gravitational potential energy to kinetic energy
    3. chemical energy of fuel to heat energy
    4. light energy of the Sun to electrical energy
    Show answer

    Answer: B. Water at a height has gravitational potential energy, which becomes kinetic energy as it falls onto the turbine.

  3. 3. Three stages of a power plant have efficiencies 50%, 80% and 90%. The overall efficiency is:

    1. 73%
    2. 36%
    3. 220%
    4. 40%
    Show answer

    Answer: B. Multiply the efficiencies: 0.5 × 0.8 × 0.9 = 0.36 = 36%.

  4. 4. Water falls through 50 m at 200 kg every second (g = 10 m/s²). The power available from the fall is:

    1. 10 kW
    2. 1 kW
    3. 100 kW
    4. 10 W
    Show answer

    Answer: C. Power = m g h per second = 200 × 10 × 50 = 100 000 W = 100 kW.

  5. 5. A lamp takes in 50 J each second and gives out 5 J as light. Its efficiency is:

    1. 10%
    2. 5%
    3. 90%
    4. 45%
    Show answer

    Answer: A. Efficiency = useful output ÷ input × 100 = 5 ÷ 50 × 100 = 10%.

Privacy · Terms · Refunds · Delivery