• Foundation
  • About 13 min
  • 5 practice questions

Simple machines: levers, inclined planes and pulleys

Use mechanical advantage and efficiency to compare machines, and see why no machine gives out more work than it takes in.

If something looks wrong, please tell us.

A crowbar lifts a heavy stone, a ramp helps a loaded trolley up to a platform, and a pulley raises a bucket from a well. These are simple machines. People often say that they make work easier, and that is true in one sense: they let a small force do a job that would need a large force. But they never give you more work than you put in. This lesson shows how to measure what a machine really does for you.

What a machine does

A machine takes in work from the person using it (the effort applied) and passes it on to the load. A machine can do one or more of these things: change the size of the force, change its direction, or change the speed or distance of the motion. It cannot create energy. If a machine makes the force smaller, the effort must be applied over a longer distance.

Mechanical advantage and velocity ratio

  • Mechanical advantage (MA) = load ÷ effort. It tells how many times the machine multiplies your force.
  • Velocity ratio (VR) = distance moved by the effort ÷ distance moved by the load. It is fixed by the shape of the machine.
  • Efficiency = work done on the load ÷ work done by the effort × 100%. This is the same as (MA ÷ VR) × 100%.

In an ideal machine with no friction, the work done by the effort equals the work done on the load, so MA = VR and efficiency = 100%. In a real machine, friction makes the effort larger than the ideal value, so MA is less than VR and the efficiency is below 100%.

Three common machines

Ideal behaviour of simple machines
MachineIdeal mechanical advantage
LeverEffort arm ÷ load arm
Inclined planeLength of slope ÷ height
Single fixed pulley1 (only changes the direction of the force)
Single movable pulley2 (the effort moves twice as far as the load)

Worked examples

Example 1 (lever). A load of 300 N is lifted with a crowbar. The load arm is 0.5 m and the effort arm is 2 m. Ideal effort × effort arm = load × load arm, so effort = 300 × 0.5 ÷ 2 = 75 N. MA = 300 ÷ 75 = 4, which equals 2 ÷ 0.5 = 4.

Example 2 (inclined plane). A load of weight 500 N is pushed up a smooth slope 5 m long and 1 m high. Ideal effort = load × height ÷ length = 500 × 1 ÷ 5 = 100 N. Check with work: effort work = 100 × 5 = 500 J, and the work done on the load against gravity = 500 × 1 = 500 J. The two are equal.

Example 3 (efficiency). A pulley system lifts a load of 400 N through 1 m when the effort of 150 N moves through 4 m. Work done on the load = 400 × 1 = 400 J. Work done by the effort = 150 × 4 = 600 J. Efficiency = 400 ÷ 600 × 100 = 66.7%. Check: MA = 400 ÷ 150 = 2.67, VR = 4 ÷ 1 = 4, and MA ÷ VR = 0.667.

Example 4 (no free work). A jack lifts a car of weight 10 000 N by 0.1 m with an ideal effort of 500 N. The effort has to move 10 000 × 0.1 ÷ 500 = 2 m. Work in: 500 × 2 = 1000 J. Work out: 10 000 × 0.1 = 1000 J. The machine makes the effort 20 times smaller, but the hand must move 20 times as far.

Example 5 (what lowers efficiency). In Example 3, the missing 600 − 400 = 200 J does not vanish. It is used up against friction in the pulleys and in lifting the lower pulley block, and appears as heat.

Mechanical advantage = load ÷ effort. Efficiency = (MA ÷ VR) × 100%. A machine trades force for distance; it never gives more work than it receives.

— Rule to remember

Key takeaways

  • A simple machine changes the size or direction of a force, not the amount of work.
  • A larger mechanical advantage means a smaller effort, but over a larger distance.
  • Real machines have an efficiency below 100% because of friction.
  • Lever MA = effort arm ÷ load arm; inclined plane MA = length ÷ height.

Check your understanding

  1. 1. A machine has a load of 600 N and needs an effort of 150 N. Its mechanical advantage is:

    1. 0.25
    2. 4
    3. 450
    4. 90 000
    Show answer

    Answer: B. MA = load ÷ effort = 600 ÷ 150 = 4.

  2. 2. A smooth slope is 4 m long and 1 m high. The ideal effort to push a 800 N load up it is:

    1. 3200 N
    2. 800 N
    3. 400 N
    4. 200 N
    Show answer

    Answer: D. Effort = load × height ÷ length = 800 × 1 ÷ 4 = 200 N.

  3. 3. A lever has a load arm of 0.4 m and an effort arm of 2 m. Ignoring friction, the ideal mechanical advantage is:

    1. 0.2
    2. 5
    3. 1.6
    4. 2.4
    Show answer

    Answer: B. MA = effort arm ÷ load arm = 2 ÷ 0.4 = 5.

  4. 4. An effort of 200 N moves 3 m and lifts a load of 450 N through 1 m. The efficiency of the machine is:

    1. 75%
    2. 133%
    3. 50%
    4. 25%
    Show answer

    Answer: A. Work in = 200 × 3 = 600 J. Work out = 450 × 1 = 450 J. Efficiency = 450 ÷ 600 × 100 = 75%.

  5. 5. Which of these statements about machines is true?

    1. A machine can output more work than it takes in
    2. A machine with MA greater than 1 reduces the distance the effort moves
    3. A real machine always has efficiency below 100%
    4. A single fixed pulley doubles the force
    Show answer

    Answer: C. Friction means some work is wasted, so a real machine is always below 100% efficient. No machine creates work, and a single fixed pulley only changes the direction of the force.

Privacy · Terms · Refunds · Delivery