- Practice
- About 14 min
- 5 practice questions
Dams and multi-purpose river valley projects
Trace India's tradition of hydraulic structures, define a dam and its types, and explain how multi-purpose projects such as Bhakra Nangal and Hirakud combine irrigation, power and flood control.
If something looks wrong, please tell us.
By the end of this lesson you can
- Give examples of water structures from ancient and medieval India.
- Define a dam and classify dams by structure and height.
- Explain what makes a project multi-purpose.
- Match major Indian dams with their rivers.
The Bhakra dam on the Satluj stores water that irrigates fields across Punjab, Haryana and Rajasthan and produces electricity. Building such structures is not new: Indians have managed water with dams, tanks and canals for over two thousand years.
An old tradition of hydraulic structures
- In the 1st century BC, Sringaverapura near Allahabad (Prayagraj) had a system that channelled the flood water of the Ganga.
- In Chandragupta Maurya's time, dams, lakes and irrigation systems were built on a large scale.
- Remains of irrigation works have been found at Kalinga (Odisha), Nagarjunakonda (Andhra Pradesh), Bennur (Karnataka) and Kolhapur (Maharashtra).
- In the 11th century, Bhopal Lake, one of the largest artificial lakes of its time, was built.
- In the 14th century, a large tank at Hauz Khas, Delhi, supplied water to the Siri Fort area.
What a dam is
A dam is a barrier across flowing water that blocks, directs or slows the flow, usually creating a reservoir or lake. Most dams have a spillway (or weir) over or through which extra water can flow. Dams are classified by structure and material (timber, embankment or masonry dams) and by height (low, medium and high dams, or large and major dams).
Multi-purpose projects
Dams were once built only to store water for irrigation. Today the same stored water serves many uses, so these schemes are called multi-purpose river valley projects:
Uses of a multi-purpose project
-
Water use
- Irrigation
- Drinking water for homes
- Water for industry
-
Energy
- Hydroelectric power
-
Safety
- Flood control
-
Other
- Inland navigation
- Fish breeding
- Recreation
After Independence these projects were seen as the way to development. Jawaharlal Nehru called dams the 'temples of modern India', because they would link the growth of agriculture and villages with industry and cities. The Bhakra Nangal project on the Satluj in the Satluj-Beas basin is used for both hydroelectric power and irrigation; the Hirakud project on the Mahanadi combines water conservation with flood control.
| Dam | River and state | What the textbook notes |
|---|---|---|
| Bhakra | Satluj, Himachal Pradesh-Punjab | Power and irrigation; one of India's largest reservoirs |
| Hirakud | Mahanadi, Odisha | The longest dam in India |
| Tehri | Bhagirathi, Uttarakhand | The highest dam in India |
| Indira Sagar | Narmada, Madhya Pradesh | Part of the Narmada valley project; largest reservoir in India by storage |
| Nagarjuna Sagar | Krishna, Telangana-Andhra Pradesh | Among the largest reservoirs |
| Three Gorges | Yangtze, China | The largest river valley project in the world |
Bhakra - Satluj; Hirakud - Mahanadi; Tehri - Bhagirathi; Indira Sagar - Narmada. A multi-purpose project integrates irrigation, power, water supply, flood control, navigation and fishing.
Worked example 1: is it multi-purpose?
(a) A small check dam that only stores rain for one village's fields: single-purpose (irrigation). (b) A large dam whose water runs turbines, fills canals and is released carefully during floods: multi-purpose (power, irrigation, flood control). Count the uses: more than one integrated use means multi-purpose.
Worked example 2: matching dams with rivers
Use geography to remember. Punjab's big dam must be on a Punjab river: Bhakra on the Satluj. Odisha's great river is the Mahanadi: Hirakud. The Bhagirathi flows from the Himalayas in Uttarakhand: Tehri. The Narmada flows west through Madhya Pradesh: Indira Sagar.
Key takeaways: India has built water structures since ancient times. A dam is a barrier that creates a reservoir; dams are classified by structure and height. Multi-purpose projects combine irrigation, power, water supply, flood control, navigation and fishing; Nehru called them the temples of modern India. Bhakra Nangal (Satluj) and Hirakud (Mahanadi) are key examples.
Check your understanding
-
1. On which river is the Bhakra dam built?
- Beas
- Satluj
- Ravi
- Yamuna
Show answer
Answer: B. The Bhakra Nangal project is on the Satluj in the Satluj-Beas basin and is used for irrigation and hydroelectric power.
-
2. Which dam does the textbook describe as the highest in India?
- Tehri
- Hirakud
- Bhakra
- Nagarjuna Sagar
Show answer
Answer: A. Tehri dam on the Bhagirathi in Uttarakhand is the highest; Hirakud on the Mahanadi is the longest.
-
3. Who called dams the 'temples of modern India'?
- Mahatma Gandhi
- Rajendra Singh
- Dr B. R. Ambedkar
- Jawaharlal Nehru
Show answer
Answer: D. Jawaharlal Nehru used this phrase because he saw dams as linking agricultural and industrial growth.
-
4. The Hirakud project integrates water conservation with flood control on which river?
- Narmada
- Godavari
- Mahanadi
- Krishna
Show answer
Answer: C. Hirakud is on the Mahanadi in Odisha.
-
5. Which of these is NOT a purpose of a multi-purpose river project?
- Hydroelectric power
- Flood control
- Inland navigation
- Increasing soil salinity
Show answer
Answer: D. Salinity is an unwanted side-effect of over-irrigation, not a purpose. Power, flood control and navigation are planned uses.
Sign in to keep track of the lessons you finish.