Revision notes

Geography Chapter 3 Water Resources: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Water on Earth: how much there is, where it is and how it cycles

Where Earth's water is

  • Oceans and other salt water (about 97%)
    • Pacific, Atlantic, Indian, Southern and Arctic Oceans
    • Salt lakes and saline groundwater
  • Fresh water (about 3%)
    • Glaciers and ice caps: about two-thirds of fresh water
    • Groundwater: most of the rest
    • Lakes, rivers, swamps, soil moisture, air and living things: a tiny share
Rounded shares, as commonly given; the textbook's charts give similar figures.

The water cycle

  1. Evaporation and transpiration Water vapour rises from seas, lakes, soil and plants (together called evapotranspiration)
  2. Condensation Vapour cools to form clouds
  3. Precipitation Rain, snow or hail falls on land and sea
  4. Infiltration and runoff Water soaks into the ground or flows over the surface
  5. Groundwater and river discharge Water reaches rivers, lakes and the sea

Then back to step 1: Evaporation and transpiration

Two kinds of water
PointBlue waterGreen water
MeaningWater in rivers, lakes and aquifersRain water held in the soil that feeds plants and returns to the air
Where we see itCanals, tube-wells, reservoirsRain-fed crops, forests, grasslands, wetlands
Why the idea helpsShows the water we pump and divertShows how much farms and forests depend directly on rain and soil moisture

About 97% of Earth's water is salt water and about 3% is fresh; two-thirds of the fresh water is frozen. The water cycle renews fresh water, but only as fast as rain recharges it.

Key takeaways: only about 3% of Earth's water is fresh, and most of that is ice or underground. The water cycle (evaporation, condensation, precipitation, infiltration, runoff) renews fresh water. India has a small share of world water for a very large share of world population. Blue water is in rivers, lakes and aquifers; green water is soil moisture used by plants.

Read the full lesson

Lesson 2

Using water and water scarcity

Causes of water scarcity

  • More people
    • More water for homes
    • More water to grow more food
  • Over-use for farming
    • Expanding irrigated area and dry-season crops
    • Private wells and tube-wells lowering the water table
  • Industry and cities
    • Industries use much water and need power, much of it hydroelectric
    • Growing cities with high water use
  • Poor quality and unequal access
    • Polluted water cannot be used even if plentiful
    • Some people get much more than others

Water scarcity can be a problem of quantity, quality or access. Agriculture is the largest user of fresh water, so saving water in irrigation saves the most.

Key takeaways: agriculture uses the most fresh water, especially in India. Water scarcity comes from growing population, over-irrigation, industry, urbanisation, pollution and unequal access, so even rainy regions can face it. Punjab's groundwater is being pumped faster than it is recharged.

Read the full lesson

Lesson 3

Dams and multi-purpose river valley projects

Uses of a multi-purpose project

  • Water use
    • Irrigation
    • Drinking water for homes
    • Water for industry
  • Energy
    • Hydroelectric power
  • Safety
    • Flood control
  • Other
    • Inland navigation
    • Fish breeding
    • Recreation
Some notable dams described in the textbook
DamRiver and stateWhat the textbook notes
BhakraSatluj, Himachal Pradesh-PunjabPower and irrigation; one of India's largest reservoirs
HirakudMahanadi, OdishaThe longest dam in India
TehriBhagirathi, UttarakhandThe highest dam in India
Indira SagarNarmada, Madhya PradeshPart of the Narmada valley project; largest reservoir in India by storage
Nagarjuna SagarKrishna, Telangana-Andhra PradeshAmong the largest reservoirs
Three GorgesYangtze, ChinaThe largest river valley project in the world

Bhakra - Satluj; Hirakud - Mahanadi; Tehri - Bhagirathi; Indira Sagar - Narmada. A multi-purpose project integrates irrigation, power, water supply, flood control, navigation and fishing.

Key takeaways: India has built water structures since ancient times. A dam is a barrier that creates a reservoir; dams are classified by structure and height. Multi-purpose projects combine irrigation, power, water supply, flood control, navigation and fishing; Nehru called them the temples of modern India. Bhakra Nangal (Satluj) and Hirakud (Mahanadi) are key examples.

Read the full lesson

Lesson 4

Problems of large dams and water conflicts

How a large reservoir can trigger earthquakes

  1. Huge weight of water and sediment
  2. Pressure on rocks below
  3. Cracks form or faults widen
  4. Seeping water lubricates the faults
  5. Rocks slip: tremors

Weighing multi-purpose projects

  • Advantages
    • Irrigation for dry areas
    • Hydroelectric power for homes and industry
    • Water supply to cities and factories
    • Flood control when well managed
    • Navigation, fishing, recreation
  • Disadvantages
    • Displacement and loss of livelihood
    • Submerged forests and farmland
    • Blocked fish migration, poorer river habitat
    • Sedimentation; risk of floods and RIS
    • Salinity, inequality and inter-state disputes

Large dams bring water and power, but can displace people, harm rivers, fill with silt and spark disputes. Planning must count both sides.

Key takeaways: large dams disturb river flow, block fish, submerge land, trap sediment and may trigger earthquakes (RIS). They have displaced people and led to movements such as the Narmada Bachao Andolan. Irrigation changes cropping patterns and can cause salinity and inequality, and water sharing causes disputes like that over the Kaveri.

Read the full lesson

Lesson 5

Rainwater harvesting, the Seechewal model and water conservation

Traditional water harvesting
RegionMethodHow it works
Western HimalayasGuls or kulsChannels that divert stream water to fields on the slopes
RajasthanRooftop rainwater harvestingRain from roofs is stored, mainly for drinking
Flood plains of BengalInundation channelsFlood water is led into fields to irrigate them
Jaisalmer and other dry parts of RajasthanKhadins and johadsFields are turned into rain-fed storage areas where water stands and moistens the soil

Steps of the Seechewal model

  1. Collect sewage Village waste water flows into a pond
  2. Filter A mesh removes floating objects
  3. Well 1 (clockwise) Silt and pebbles settle out
  4. Well 2 (anticlockwise) Fat, oil and ghee are separated
  5. Well 3 to main pond Sunlight cleans the water further
  6. Pump to fields Treated water irrigates crops; trees are planted around

Water collected = roof area x rainfall x collection efficiency. 1 cubic metre = 1,000 litres.

Key takeaways: traditional methods include guls/kuls, rooftop harvesting, inundation channels, khadins and johads. Tamil Nadu made rooftop harvesting compulsory; Punjab's bylaws require it but enforcement is weak. Rajendra Singh revived johads. The Seechewal model treats village sewage in a pond and three wells and reuses it for irrigation. Swachh Bharat Mission (Grameen, 2014) and Jal Shakti Abhiyan (2019) are national efforts.

Read the full lesson

Privacy · Terms · Refunds · Delivery