Revision notes

Chapter 1 Matter in Our Surroundings: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What matter is and why we say it is made of particles

Quick sorting
ItemMatter?Reason
Ice cubeYesHas mass and volume
Smoke from a chimneyYesMade of particles of gases and soot
Scent of a roseYesParticles from the flower reach the nose
HappinessNoNo mass, takes no space
Heat felt near a fireNoA form of energy, not material

One dilution step after another

  1. Crystals in 100 mL Deep purple
  2. 10 mL + 90 mL water 1/10 as strong
  3. 10 mL + 90 mL water 1/100 as strong
  4. Repeat 5 to 8 times Still faintly pink
Each step takes 10 mL of the previous solution into 90 mL of water, so the colour becomes one-tenth as strong each time.

Matter is anything that has mass and occupies space. It is made of particles far too small to see. 1 L = 1 dm³ = 1000 mL = 1000 cm³; 1 m³ = 1000 L.

Key takeaways: matter has mass and volume; feelings, ideas and forms of energy are not matter. The old Panch Tatva idea has been replaced by the particle idea. Dissolving shows that particles fit into spaces between other particles, and repeated dilution shows the particles are extremely small. Use kg for mass and m³ (or L, mL, cm³) for volume.

Read the full lesson

Lesson 2

Characteristics of particles: spaces, constant motion, diffusion and attraction

Characteristics of particles of matter

  • Have space between them
    • Sugar dissolves in tea
    • Lemon juice mixes into water
  • Are always moving
    • They have kinetic energy
    • Faster when hotter
    • Cause diffusion
  • Attract each other
    • Hold matter together
    • Strength differs from substance to substance
Diffusion in different states (fastest to slowest)
Where diffusion happensExampleSpeed
Gas into gasSmell of frying pakoras spreads through the houseFast (seconds)
Liquid or solid into liquidInk or copper sulphate spreading in waterSlower (minutes to hours)
Liquid into thick liquidColour spreading in honeyVery slow

Particles of matter: (1) have spaces between them, (2) are always moving and so have kinetic energy, which rises with temperature, (3) attract one another with a force that differs from substance to substance. Diffusion is the self-mixing of particles and is faster when hotter.

Key takeaways: the gaps between particles let one substance mix into another; the constant motion of particles causes diffusion, which speeds up with temperature; and attractive forces hold particles together, strongly in iron, weakly in a gas. A swimmer can cut through water because the attraction between water particles is not very strong.

Read the full lesson

Lesson 3

The three states of matter: solid, liquid and gas

Solid, liquid and gas compared

  • Solid
    • Definite shape and volume
    • Rigid, almost incompressible
    • Particles closest, strongest attraction
    • Particles vibrate in fixed positions
    • Least kinetic energy
  • Liquid
    • Fixed volume, takes shape of container
    • Fluid, slightly compressible
    • Particles a little apart, moderate attraction
    • Layers slip and slide past each other
    • More kinetic energy
  • Gas
    • No fixed shape or volume
    • Highly compressible, fills container
    • Particles far apart, weakest attraction
    • Random motion at high speed
    • Most kinetic energy

Solid: fixed shape and volume. Liquid: fixed volume, no fixed shape. Gas: neither. Attraction and closeness of particles: solid > liquid > gas; spaces and kinetic energy: gas > liquid > solid. Density = mass ÷ volume.

Key takeaways: a wooden table is a solid because it has a fixed shape and volume and is rigid. You can move your hand through air easily but not through a block of wood, because air particles are far apart and weakly attracted while wood particles are packed and strongly held. Gas pressure comes from particles striking the walls.

Read the full lesson

Lesson 4

Changing the state of matter: temperature, latent heat, sublimation and pressure

Interconversion of the three states

  • Solid
    • Melting (fusion) to liquid
    • Sublimation to gas
  • Liquid
    • Vaporisation to gas
    • Solidification (freezing) to solid
  • Gas
    • Condensation to liquid
    • Deposition to solid
Heating and lowering pressure push to the right (solid to gas); cooling and raising pressure push back.

K = °C + 273 and °C = K − 273. Temperature stays constant during a change of state because the heat supplied (latent heat) is used to overcome the attraction between particles.

Key takeaways: heating increases kinetic energy until particles overcome their attraction: solids melt at the melting point, liquids boil at the boiling point. Latent heat changes the state without changing the temperature. Some solids sublime; some gases deposit as solids. Raising pressure and cooling can turn a gas into a liquid.

Read the full lesson

Lesson 5

Evaporation: what affects it and how it causes cooling

Evaporation and boiling
FeatureEvaporationBoiling
TemperatureAny temperature below the boiling pointOnly at the boiling point
Where it happensAt the surface onlyThroughout the liquid (bulk)
BubblesNoneBubbles form inside the liquid
SpeedSlowFast
EffectCools the liquid and surroundingsTemperature stays at boiling point while heat is supplied

What changes the rate of evaporation

  • Surface area
    • Larger area, faster evaporation
    • Clothes are spread out to dry
  • Temperature
    • Higher temperature, faster
    • More particles have enough energy to escape
  • Humidity
    • Amount of water vapour in air
    • Higher humidity, slower evaporation
  • Wind speed
    • Wind carries vapour away
    • Clothes dry faster on a windy day
Measurable quantities from this chapter and their SI units
QuantityUnitSymbol
TemperaturekelvinK
Lengthmetrem
Masskilogramkg
WeightnewtonN
Volumecubic metrem³
Densitykilogram per cubic metrekg m⁻³
PressurepascalPa

Evaporation is a surface change below the boiling point. It is faster with a larger surface, higher temperature, lower humidity and more wind. Evaporation causes cooling.

Key takeaways: evaporation happens at all temperatures because some surface particles always have enough energy to escape. Four factors control its rate. The escaping particles take heat from their surroundings, which is why a matka cools water, sweat cools the body and acetone feels cold on the skin.

Read the full lesson

Privacy · Terms · Refunds · Delivery