• Practice
  • About 16 min
  • 5 practice questions

The three states of matter: solid, liquid and gas

Compare solids, liquids and gases by shape, volume, rigidity, compressibility, diffusion and density, and explain gas pressure and unusual cases like a sponge or a rubber band.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List the properties of solids, liquids and gases.
  • Explain these properties using the spacing, motion and attraction of particles.
  • Explain why a gas exerts pressure and fills its container.
  • Calculate density and use it to compare substances.

Matter around us exists in three states: solid, liquid and gas. Section 1.3 of the PSEB textbook (prepared by NCERT) shows that the differences between them come from the three particle characteristics of lesson 2: how close the particles are, how fast they move and how strongly they attract.

The solid state

A pen, a book, a needle and a wooden stick each have a definite shape, distinct boundaries and a fixed volume. Pushing hard on them does not squeeze them smaller: solids have negligible compressibility. They tend to keep their shape when a force acts; they may break, but their shape is hard to change, so solids are rigid. Their particles are packed closely and attract one another strongly.

  • Rubber band: it changes shape when stretched and regains it when the force is removed; too much force breaks it. It is still a solid.
  • Sugar or salt: the powder takes the shape of its jar, but each tiny crystal keeps its own fixed shape, so sugar and salt are solids.
  • Sponge: it can be squeezed because it has tiny holes filled with air. Pressing pushes the air out; the sponge material itself is a solid.

The liquid state

Measure 50 mL of water, oil or milk and pour it into containers of different shapes: the volume stays 50 mL, but the shape changes each time. Liquids have no fixed shape but a fixed volume; they take the shape of the container. They flow, so they are not rigid but fluid. Particles in a liquid are a little farther apart and move more freely than in a solid, so solids, liquids and gases can diffuse into liquids faster than into solids. Gases from the air, such as oxygen and carbon dioxide, dissolve in water by diffusion; fish and water plants depend on this dissolved oxygen and carbon dioxide.

The gaseous state

In a teacher demonstration, three syringes are sealed at the nozzle with rubber corks: one holds air, one water and one pieces of chalk. The piston of the air-filled syringe goes in easily; water and chalk hardly budge. Gases are highly compressible because their particles are far apart. That is why a large amount of gas can be filled into a small cylinder, as with LPG for cooking or compressed natural gas (CNG) for vehicles, and why one cylinder can fill many balloons.

Gas particles move randomly at high speed. They hit each other and the walls of the container. The pressure of a gas is the force these particles exert per unit area on the walls. Because the particles move freely in every direction, a gas has no fixed shape or volume and fills its container completely. Gases also diffuse into other gases very fast, which is why a smell spreads through a house in seconds.

Solid, liquid and gas compared

  • Solid
    • Definite shape and volume
    • Rigid, almost incompressible
    • Particles closest, strongest attraction
    • Particles vibrate in fixed positions
    • Least kinetic energy
  • Liquid
    • Fixed volume, takes shape of container
    • Fluid, slightly compressible
    • Particles a little apart, moderate attraction
    • Layers slip and slide past each other
    • More kinetic energy
  • Gas
    • No fixed shape or volume
    • Highly compressible, fills container
    • Particles far apart, weakest attraction
    • Random motion at high speed
    • Most kinetic energy

Density

The mass per unit volume of a substance is its density: density = mass ÷ volume. Its SI unit is kg/m³ (kilogram per cubic metre); in the laboratory g/cm³ is common, and 1 g/cm³ = 1000 kg/m³. Solids are usually densest and gases least dense, because particles are packed most closely in solids.

Worked example 1: finding density

Question (made-up data): a metal block has a mass of 135 g and a volume of 50 cm³. Find its density in g/cm³ and kg/m³. Working: density = 135 g ÷ 50 cm³ = 2.7 g/cm³. Since 1 g/cm³ = 1000 kg/m³, this is 2700 kg/m³. Check: 2.7 × 50 = 135 g. (2.7 g/cm³ is the standard density of aluminium.)

Worked example 2: ordering by density

Question: arrange oxygen gas, cooking oil, water and aluminium in increasing order of density. Reasoning: a gas is far less dense than any liquid or solid, so oxygen comes first. Cooking oil floats on water, so oil is less dense than water. A solid metal sinks in water, so aluminium is densest. Answer: oxygen < cooking oil < water < aluminium.

An exception to remember: solids are usually denser than their liquids, yet ice floats on water. When water freezes, its particles arrange themselves in an open, cage-like pattern with more empty space, so ice is less dense than liquid water (about 0.92 g/cm³ compared with about 1.0 g/cm³). This keeps ponds frozen only at the top in winter, so fish survive in the water below.

Solid: fixed shape and volume. Liquid: fixed volume, no fixed shape. Gas: neither. Attraction and closeness of particles: solid > liquid > gas; spaces and kinetic energy: gas > liquid > solid. Density = mass ÷ volume.

Key takeaways: a wooden table is a solid because it has a fixed shape and volume and is rigid. You can move your hand through air easily but not through a block of wood, because air particles are far apart and weakly attracted while wood particles are packed and strongly held. Gas pressure comes from particles striking the walls.

Check your understanding

  1. 1. Why does a gas exert pressure on the walls of its container?

    1. Its particles move randomly and keep hitting the walls
    2. Its particles are fixed in place and press outwards
    3. Gas particles are heavier than solid particles
    4. The container pulls the gas particles
    Show answer

    Answer: A. Gas particles move at high speed in all directions and keep striking the walls. The force they exert per unit area on the walls is the pressure of the gas.

  2. 2. A sponge can be squeezed smaller, yet it is called a solid. Why?

    1. It is really a liquid
    2. Its particles have no attraction
    3. Air in its tiny holes is pushed out; the sponge material keeps its nature as a solid
    4. Solids are always compressible
    Show answer

    Answer: C. A sponge has many minute holes filled with air. Pressing it squeezes the air out, which is why its size falls. The sponge material itself has a definite shape when left alone and is a solid; solids in general have negligible compressibility.

  3. 3. A stone has a mass of 60 g and a volume of 24 cm³. What is its density?

    1. 0.4 g/cm³
    2. 36 g/cm³
    3. 1440 g/cm³
    4. 2.5 g/cm³
    Show answer

    Answer: D. Density = mass ÷ volume = 60 g ÷ 24 cm³ = 2.5 g/cm³. Check: 2.5 × 24 = 60 g.

  4. 4. Which statement about liquids is correct?

    1. They have a fixed shape but no fixed volume
    2. They have a fixed volume but take the shape of their container
    3. They are rigid and cannot flow
    4. They fill any container completely
    Show answer

    Answer: B. A liquid keeps its volume (50 mL stays 50 mL) but takes the shape of whatever container holds it. It flows, so it is fluid, not rigid. Filling a container completely is a property of gases.

  5. 5. Ice floats on water. What is the reason?

    1. Ice is less dense than water
    2. Ice has more mass than the same volume of water
    3. Ice particles do not attract each other
    4. Water is a gas
    Show answer

    Answer: A. An object floats on a liquid when it is less dense than the liquid. When water freezes its particles form an open arrangement with more space, so ice (about 0.92 g/cm³) is less dense than water (about 1.0 g/cm³).

Privacy · Terms · Refunds · Delivery