- Practice
- About 17 min
- 5 practice questions
Changing the state of matter: temperature, latent heat, sublimation and pressure
Explain melting and boiling with particles, define melting point, boiling point and latent heat, convert between Celsius and kelvin, and describe sublimation, deposition and the effect of pressure.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain what happens to particles when a solid melts and a liquid boils.
- Define melting point, boiling point, fusion and latent heat.
- Convert temperatures between the Celsius and kelvin scales.
- Describe sublimation and deposition with examples.
- Explain how pressure and temperature together decide the state of a substance.
Water is the easiest substance to watch changing state: it is solid as ice, liquid as water and gas as water vapour. Section 1.4 of the PSEB textbook (prepared by NCERT) asks what happens to the particles during these changes and what makes them happen.
Heating ice: melting
In a teacher demonstration, a beaker of crushed ice is heated gently on a low flame with a laboratory thermometer touching the ice, and the reading is noted. As heat is supplied, the particles of ice vibrate faster; their kinetic energy increases. The energy overcomes the forces of attraction, particles leave their fixed positions and begin to move more freely, and the solid becomes a liquid. The minimum temperature at which a solid melts to become a liquid at atmospheric pressure is its melting point. Melting is also called fusion. A high melting point means strong attraction between particles. The melting point of ice is 273.15 K, which we round to 273 K (0 °C).
The surprising observation: while the ice is melting, the thermometer reading stays the same even though heating continues. The heat is used to overcome the attraction between particles and change the state, not to raise the temperature. Because this heat is 'hidden' (it causes no rise in temperature) it is called latent heat. The latent heat of fusion is the heat energy needed to change 1 kg of a solid into liquid at atmospheric pressure at its melting point.
Heating water: boiling
If heating continues, water particles move even faster until, at a certain temperature, they have enough energy to break free from one another and the liquid turns into gas. The temperature at which a liquid starts boiling at atmospheric pressure is its boiling point; for water it is 373 K (100 °C). Boiling is a bulk phenomenon: particles from the whole body of the liquid change into vapour, which is why bubbles form inside it. Again the temperature stays constant while the water boils. The latent heat of vaporisation is the heat energy needed to change 1 kg of a liquid into gas at atmospheric pressure at its boiling point.
So steam at 373 K has more energy than water at 373 K, because its particles have absorbed the latent heat of vaporisation. That is why steam causes more severe burns than boiling water. In the same way, ice at 273 K cools a drink better than water at 273 K: as it melts it takes in its latent heat of fusion from the drink.
Celsius and kelvin
The kelvin (K) is the SI unit of temperature. 0 °C = 273.15 K; for convenience the textbook rounds this to 273. To change kelvin to Celsius, subtract 273; to change Celsius to kelvin, add 273. No degree sign is written with kelvin.
Worked example 1: temperature conversions
(a) Normal body temperature is about 310 K. In Celsius: 310 − 273 = 37 °C. (b) A room at 25 °C in kelvin: 25 + 273 = 298 K. (c) 470 K in Celsius: 470 − 273 = 197 °C. (d) −40 °C in kelvin: −40 + 273 = 233 K. Check (b): 298 − 273 = 25 °C, correct.
Worked example 2: heat hidden in melting (beyond the book)
Question: the standard value of the latent heat of fusion of ice is about 3.34 × 10⁵ J/kg (this value is not given in the chapter). How much heat is needed to melt 0.5 kg of ice at 273 K into water at 273 K? Working: heat = mass × latent heat = 0.5 kg × 3.34 × 10⁵ J/kg = 1.67 × 10⁵ J, that is 167 000 J. Check: 167 000 ÷ 0.5 = 334 000 J/kg. All this energy goes in without any rise in temperature.
Sublimation and deposition
Some substances change directly from solid to gas without becoming liquid. In a demonstration, crushed camphor is placed in a china dish covered with an inverted funnel whose stem is plugged with cotton, and the dish is warmed gently: camphor vapour rises and solidifies again on the cooler funnel. A change of state directly from solid to gas is sublimation; the direct change from gas to solid is deposition. Naphthalene balls in a cupboard slowly shrink and disappear without leaving any liquid because they sublime.
Effect of pressure
States differ in how far apart the particles are. If a gas in a cylinder is compressed with a piston, its particles come closer. Applying pressure and lowering the temperature can liquefy a gas. Solid carbon dioxide is stored under high pressure; when the pressure falls to 1 atmosphere it changes directly into gas without becoming liquid, so it is called dry ice. The atmosphere (atm) is a unit of pressure: 1 atm = 1.01 × 10⁵ Pa, and the pascal (Pa) is the SI unit. Normal atmospheric pressure at sea level is 1 atm. Pressure and temperature together decide whether a substance is solid, liquid or gas.
Interconversion of the three states
-
Solid
- Melting (fusion) to liquid
- Sublimation to gas
-
Liquid
- Vaporisation to gas
- Solidification (freezing) to solid
-
Gas
- Condensation to liquid
- Deposition to solid
K = °C + 273 and °C = K − 273. Temperature stays constant during a change of state because the heat supplied (latent heat) is used to overcome the attraction between particles.
Key takeaways: heating increases kinetic energy until particles overcome their attraction: solids melt at the melting point, liquids boil at the boiling point. Latent heat changes the state without changing the temperature. Some solids sublime; some gases deposit as solids. Raising pressure and cooling can turn a gas into a liquid.
Check your understanding
-
1. What is 353 K on the Celsius scale?
- 626 °C
- −80 °C
- 8 °C
- 80 °C
Show answer
Answer: D. To change kelvin to Celsius subtract 273: 353 − 273 = 80 °C.
-
2. Why does the temperature of melting ice stay constant even though heat is being supplied?
- The thermometer stops working at 0 °C
- The heat is used to overcome the attraction between particles and change the state
- Ice cannot absorb heat
- Heat escapes faster than it is supplied
Show answer
Answer: B. During melting the heat supplied (the latent heat of fusion) goes into breaking the hold of the particles on each other, so the state changes but the temperature does not rise until all the ice has melted.
-
3. Naphthalene balls kept in a cupboard become smaller and disappear without leaving any liquid. This change is
- melting
- condensation
- sublimation
- deposition
Show answer
Answer: C. The solid changes directly into vapour without passing through the liquid state, which is sublimation. Deposition is the reverse (gas directly to solid).
-
4. Why does steam at 100 °C cause more severe burns than water at 100 °C?
- Steam has extra energy, the latent heat of vaporisation, which it releases on the skin
- Steam is at a higher temperature than 100 °C
- Water at 100 °C has no heat
- Steam is denser than water
Show answer
Answer: A. Both are at the same temperature, but steam particles have absorbed the latent heat of vaporisation. When steam condenses on skin it gives out that extra heat as well, so it burns more severely.
-
5. Which pair of changes helps to liquefy a gas?
- Lowering pressure and raising temperature
- Raising temperature only
- Lowering pressure only
- Raising pressure and lowering temperature
Show answer
Answer: D. Higher pressure pushes gas particles closer together and lower temperature reduces their kinetic energy, so attraction can hold them together as a liquid.
Sign in to keep track of the lessons you finish.