• Practice
  • About 16 min
  • 5 practice questions

Writing chemical formulae using valency

Use valencies and the charges on ions to write chemical formulae of binary compounds and compounds with polyatomic ions, and read the number of atoms from a formula.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain what valency means.
  • Use the textbook's table of common ions and their valencies.
  • Write formulae by criss-crossing valencies or charges.
  • Use brackets correctly for polyatomic ions.
  • Count the atoms in a formula.

A chemical formula is a symbolic representation of a compound's composition: it shows which elements are present and how many atoms of each combine. Section 3.4 of the PSEB textbook (prepared by NCERT) shows that formulae need not be memorised; they can be built from valencies.

Valency

The valency of an element is its combining capacity. You can think of it as the number of hands an atom has for holding other atoms: hydrogen has one hand, oxygen two, carbon four. A compound is complete when every hand is held. For ions, the valency is the size of the charge.

Some common ions (from the textbook's table)
ValencyMetal ionsNon-metal ionsPolyatomic ions
1Sodium Na⁺, potassium K⁺, silver Ag⁺, copper(I) Cu⁺Hydrogen H⁺, hydride H⁻, chloride Cl⁻, bromide Br⁻, iodide I⁻Ammonium NH₄⁺, hydroxide OH⁻, nitrate NO₃⁻, hydrogen carbonate HCO₃⁻
2Magnesium Mg²⁺, calcium Ca²⁺, zinc Zn²⁺, iron(II) Fe²⁺, copper(II) Cu²⁺Oxide O²⁻, sulphide S²⁻Carbonate CO₃²⁻, sulphite SO₃²⁻, sulphate SO₄²⁻
3Aluminium Al³⁺, iron(III) Fe³⁺Nitride N³⁻Phosphate PO₄³⁻

Some elements show more than one valency; a Roman numeral in brackets shows which one is meant, as in iron(II) and iron(III).

Rules for writing formulae

  1. The valencies or charges on the ions must balance, so the compound is neutral overall.
  2. When a compound has a metal and a non-metal, the metal is written first: CaO, NaCl, FeS, CuO.
  3. When there is more than one polyatomic ion, put its formula in brackets and write the number outside: Mg(OH)₂. With only one, no bracket is needed: NaOH.

The criss-cross method

  1. Write the symbols Cation (metal) first, anion second
  2. Write valencies below Or the charges on the ions
  3. Criss-cross Each valency becomes the other's subscript
  4. Simplify Divide by any common factor; omit 1

Compounds made of just two different elements are binary compounds. For example, hydrogen (1) and chlorine (1) give HCl; carbon (4) and chlorine (1) give CCl₄; magnesium (2+) and chloride (1−) give MgCl₂, two chloride ions for every magnesium ion, so the charges balance: +2 − 2 = 0.

Worked example 1: magnesium nitride

Symbols: Mg and N. Charges: Mg²⁺ and N³⁻. Criss-cross: Mg gets 3, N gets 2, giving Mg₃N₂. Check: 3 × (+2) = +6 and 2 × (−3) = −6; total 0.

Worked example 2: zinc oxide (simplifying)

Symbols: Zn and O. Charges: 2+ and 2−. Criss-crossing gives Zn₂O₂; divide by the common factor 2 to get ZnO. Check: +2 − 2 = 0.

Worked example 3: aluminium sulphate (polyatomic ion)

Ions: Al³⁺ and SO₄²⁻. Criss-cross: Al gets 2 and sulphate gets 3. There are three sulphate ions, so the bracket is needed: Al₂(SO₄)₃. Check: 2 × (+3) = +6; 3 × (−2) = −6. Counting atoms: Al 2, S 3, O 3 × 4 = 12; 17 atoms in all.

Worked example 4: ammonium chloride and zinc hydroxide

NH₄⁺ and Cl⁻ both have valency 1, so the formula is NH₄Cl (no bracket, only one ammonium ion). Zn²⁺ and OH⁻: zinc gets 1, hydroxide gets 2, giving Zn(OH)₂. Writing ZnOH₂ would be wrong: it would mean one oxygen and two hydrogens, not two complete OH groups.

Metal first, charges balanced, criss-cross the valencies, simplify, and bracket a polyatomic ion when there is more than one of it.

Key takeaways: valency is combining capacity. Write the cation first, criss-cross the valencies, reduce to the simplest ratio and use brackets for repeated polyatomic ions. Always check that total positive charge equals total negative charge.

Check your understanding

  1. 1. What is the formula of aluminium oxide?

    1. AlO
    2. Al₃O₂
    3. AlO₃
    4. Al₂O₃
    Show answer

    Answer: D. Al³⁺ and O²⁻: criss-crossing gives Al₂O₃. Check: 2 × (+3) = +6 and 3 × (−2) = −6.

  2. 2. What is the formula of calcium hydroxide?

    1. Ca(OH)₂
    2. CaOH
    3. CaOH₂
    4. Ca₂OH
    Show answer

    Answer: A. Ca²⁺ needs two OH⁻ ions. Because the polyatomic ion appears twice it goes in brackets: Ca(OH)₂. CaOH₂ would wrongly suggest one oxygen and two hydrogens.

  3. 3. Which compound is named by the formula K₂SO₄?

    1. Potassium sulphide
    2. Potassium sulphite
    3. Potassium sulphate
    4. Phosphorus sulphate
    Show answer

    Answer: C. K is potassium and SO₄²⁻ is the sulphate ion, so K₂SO₄ is potassium sulphate. Sulphide is S²⁻ and sulphite is SO₃²⁻.

  4. 4. How many atoms are present in one formula unit of Ca₃(PO₄)₂?

    1. 9
    2. 13
    3. 11
    4. 7
    Show answer

    Answer: B. Ca: 3; P: 1 × 2 = 2; O: 4 × 2 = 8. Total = 3 + 2 + 8 = 13 atoms.

  5. 5. What is the formula of iron(III) chloride?

    1. FeCl
    2. FeCl₂
    3. Fe₃Cl
    4. FeCl₃
    Show answer

    Answer: D. Iron(III) is Fe³⁺ and chloride is Cl⁻. Three chloride ions balance one Fe³⁺, giving FeCl₃. FeCl₂ would be iron(II) chloride.

Sign in to keep track of the lessons you finish.

Next lesson → Molecular mass and formula unit mass

Privacy · Terms · Refunds · Delivery