• Practice
  • About 13 min
  • 5 practice questions

Percentage changes in length, area and volume

Predict how area, volume and perimeter change when lengths change by a percentage, using multiplying factors instead of recomputing.

If something looks wrong, please tell us.

A common exam question changes the dimensions of a figure by a percentage and asks what happens to its area or volume. You do not need to pick numbers and recalculate each time. A length that changes by x% is multiplied by a factor, and the area or volume is multiplied by a power of that factor. The percentage change is then the factor minus 1.

The factors

  • A length rising by 20% is multiplied by 1.20; a length falling by 20% is multiplied by 0.80.
  • Perimeter, circumference and every other length change by the same factor as the lengths.
  • Area changes by the square of the factor (two dimensions).
  • Volume changes by the cube of the factor (three dimensions).
Scale effects
Lengths change byArea factorArea changeVolume factorVolume change
+10%1.21+21%1.331+33.1%
+20%1.44+44%1.728+72.8%
+50%2.25+125%3.375+237.5%
-20%0.64-36%0.512-48.8%
Doubled4+300%8+700%

Worked example 1: a square

Question: The side of a square is increased by 10%. Find the percentage change in area. Working: Start with side 100. Area = 10,000. New side = 110, new area = 12,100. Change = 2,100 on 10,000 = 21%. Using factors: 1.10² = 1.21. Answer: 21% increase. Note that the area rises by more than the side.

Worked example 2: a rectangle with two changes

Question: The length of a rectangle increases by 20% and the breadth falls by 10%. Find the change in area. Working: Area factor = 1.20 × 0.90 = 1.08. Answer: 8% increase. (The changes multiply, they do not simply add: 20 - 10 = 10 would be wrong.)

Keeping the area the same

Question: The length of a rectangle increases by 25%. By what percentage must the breadth decrease so that the area stays the same? Working: The breadth factor must be 1 ÷ 1.25 = 0.80, so the breadth falls by 20%. Answer: 20% decrease. Notice that the decrease is smaller than the increase, since the decrease is taken on a larger number.

Worked example 3: a circle

Question: The radius of a circle increases by 50%. Find the changes in circumference and area. Working: Circumference factor = 1.5, so it rises by 50%. Area factor = 1.5² = 2.25, so it rises by 125%. If the radius falls by 20%, the area factor is 0.8² = 0.64, a 36% fall.

Worked example 4: a cube

Question: The edge of a cube is increased by 50%. Find the change in volume and total surface area. Working: Volume factor = 1.5³ = 3.375, a 237.5% increase. Surface area factor = 1.5² = 2.25, a 125% increase. Answer: 237.5% and 125%. Check with an edge of 2: volume 8 to 27 (a factor of 3.375); surface area 24 to 54 (a factor of 2.25).

Traps

  • Giving the percentage change of the area as the same as the length change.
  • Adding percentages (20% and -10% make 8%, not 10%).
  • Forgetting that the perimeter and circumference change by the same factor as length.

Length factor f: perimeter f, area f², volume f³; percentage change = (factor - 1) × 100.

— Rule to remember

Key takeaways

  • Convert each percentage to a factor and multiply.
  • Area uses the square, volume the cube.
  • To keep the area fixed, the other dimension takes the reciprocal factor.

Check your understanding

  1. 1. The side of a square is increased by 20%. By what percentage does its area increase?

    1. 20%
    2. 40%
    3. 42%
    4. 44%
    Show answer

    Answer: D. Area factor = 1.20² = 1.44, an increase of 44%.

  2. 2. The length of a rectangle increases by 20% and its breadth decreases by 10%. By what percentage does its area change?

    1. 8% increase
    2. 10% increase
    3. 8% decrease
    4. 2% increase
    Show answer

    Answer: A. Factor = 1.20 × 0.90 = 1.08, an increase of 8%.

  3. 3. The radius of a circle increases by 50%. By what percentage does its area increase?

    1. 50%
    2. 100%
    3. 125%
    4. 150%
    Show answer

    Answer: C. Area factor = 1.5² = 2.25, an increase of 125%.

  4. 4. The length of a rectangle is increased by 25%. By what percentage must the breadth be decreased so that the area remains the same?

    1. 25%
    2. 15%
    3. 20%
    4. 30%
    Show answer

    Answer: C. The breadth factor must be 1 ÷ 1.25 = 0.80, which is a 20% decrease.

  5. 5. The edge of a cube is doubled. By what percentage does its volume increase?

    1. 700%
    2. 100%
    3. 300%
    4. 800%
    Show answer

    Answer: A. Volume factor = 2³ = 8. Increase = 8 - 1 = 7, that is 700%.

Sign in to keep track of the lessons you finish.

Next lesson → Pipes, tanks and flowing water

Privacy · Terms · Refunds · Delivery