• Practice
  • About 14 min
  • 5 practice questions

Pipes, tanks and flowing water

Calculate the rate at which water flows through a pipe, the time to fill a tank, and combined filling and emptying times.

If something looks wrong, please tell us.

Flow problems mix mensuration with rates. Water moving through a pipe fills a cylinder of its own: the cross-section of the pipe times the length of water that passes. Tank-filling questions then ask how long a given flow takes to fill a given volume. Two ideas do all the work: volume per unit time, and the sum of rates.

Flow rate

  • In a pipe of cross-section area A, with water moving at speed v, the volume flowing per unit time is A × v.
  • For a circular pipe of radius r, A = πr², so the rate is πr²v.
  • For a river or canal of width w and depth d, the volume per unit time is w × d × v.
  • Time to fill = volume of the tank ÷ rate of flow. Keep the units consistent: cubic cm to litres divide by 1,000.

Worked example 1: a pipe filling a cylindrical tank

Question: Water flows through a pipe of internal radius 7 cm at 50 cm per second into a cylindrical tank of radius 140 cm and height 150 cm. How long will it take to fill the tank? Working: Cross-section = 22/7 × 49 = 154 square cm. Flow per second = 154 × 50 = 7,700 cubic cm = 7.7 litres per second, which is 7.7 × 60 = 462 litres per minute. Tank volume = 22/7 × 140 × 140 × 150 = 9,240,000 cubic cm = 9,240 litres. Time = 9,240 ÷ 462 = 20 minutes.

Worked example 2: a river

Question: A river 3 m deep and 40 m wide flows at 2 km per hour. How much water flows into the sea in one minute? Working: The speed is 2,000 m per hour, which is 2,000 ÷ 60 = 100/3 m per minute. Volume per minute = 40 × 3 × 100/3 = 4,000 cubic metres.

Pipes filling together, and an outlet

When several pipes work at the same time, add their rates (the fractions of the tank each fills per hour). A pipe that empties the tank has a negative rate.

Question: Pipe A fills a tank in 10 hours and pipe B fills it in 15 hours. How long will both take together? What if an outlet C empties a full tank in 30 hours and all three are open? Working: A's rate = 1/10 and B's rate = 1/15 per hour. Together = 1/10 + 1/15 = 3/30 + 2/30 = 1/6, so the time is 6 hours. With the outlet: 1/6 - 1/30 = 5/30 - 1/30 = 4/30 = 2/15, so the time is 15/2 = 7.5 hours.

Worked example 3: rise in level

Question: A rectangular tank has a base of 3 m by 2 m. By how much does the water level rise when 1,500 litres are poured in? Working: 1,500 litres = 1.5 cubic metres. Rise = volume ÷ base area = 1.5 ÷ 6 = 0.25 m = 25 cm.

Traps

  • Mixing cm, m and litres: convert to one unit before dividing.
  • Using the diameter of the pipe as the radius.
  • Adding times instead of adding rates for pipes working together.
  • Forgetting that an outlet reduces the rate.

Rate in = cross-section × speed; rates add, times do not.

— Rule to remember

Key takeaways

  • Flow per unit time = A × v.
  • Time = volume ÷ rate.
  • Combine pipes by adding fractions of the tank per hour; subtract an outlet.

Check your understanding

  1. 1. Water flows through a pipe of radius 7 cm at 50 cm per second. How many litres flow per minute?

    1. 7,700
    2. 154
    3. 77
    4. 462
    Show answer

    Answer: D. Cross-section = 154 square cm. Flow per second = 7,700 cubic cm. Per minute = 462,000 cubic cm = 462 litres.

  2. 2. A tank holds 9,240 litres and is filled at 462 litres per minute. How long does it take?

    1. 18 minutes
    2. 20 minutes
    3. 25 minutes
    4. 15 minutes
    Show answer

    Answer: B. Time = 9,240 ÷ 462 = 20 minutes.

  3. 3. Pipe A fills a tank in 10 hours and pipe B in 15 hours. How long do both take together?

    1. 12.5 hours
    2. 6 hours
    3. 5 hours
    4. 7.5 hours
    Show answer

    Answer: B. Rates: 1/10 + 1/15 = 1/6 per hour, so the time is 6 hours.

  4. 4. Pipe A fills a tank in 10 hours and pipe B in 15 hours, while an outlet empties a full tank in 30 hours. How long will it take to fill the tank with all three open?

    1. 6.5 hours
    2. 8.5 hours
    3. 9.5 hours
    4. 7.5 hours
    Show answer

    Answer: D. Rate = 1/6 - 1/30 = 4/30 = 2/15 per hour. Time = 15/2 = 7.5 hours.

  5. 5. A tank has a base of 3 m by 2 m. By how much does the water rise when 1,500 litres are added?

    1. 25 cm
    2. 50 cm
    3. 2.5 cm
    4. 15 cm
    Show answer

    Answer: A. 1,500 litres = 1.5 cubic metres. Rise = 1.5 ÷ 6 = 0.25 m = 25 cm.

Privacy · Terms · Refunds · Delivery