Revision notes

Mensuration: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Areas and perimeters of plane figures

Plane figures
ShapeAreaPerimeter
Rectangle (l, b)l × b2(l + b)
Square (a)a² (or d²/2 with diagonal d)4a
Triangle (base b, height h)½ × b × hsum of sides
Triangle (sides a, b, c)√[s(s−a)(s−b)(s−c)], s = (a+b+c)/2a + b + c
Rhombus (diagonals d1, d2)½ × d1 × d24 × side
Trapezium (parallel sides a, b, height h)½ × (a + b) × hsum of sides

Triangle = ½ × base × height. Rhombus = ½ × product of diagonals. Trapezium = ½ × sum of parallel sides × height.

— Rule to remember

Key takeaways: choose the formula for the data given; use Heron's formula when only the sides are known; and keep units consistent.

Read the full lesson

Lesson 2

Circles, sectors and rings

Circumference = 2πr and area = πr². A sector with angle θ has area (θ/360) × πr².

— Rule to remember

Key takeaways: use 22/7 with radii that are multiples of 7; wheels cover their circumference per turn; and a ring is the difference of two circles.

Read the full lesson

Lesson 3

Cubes and cuboids

Cuboid (l, b, h) and cube (a)
QuantityCuboidCube
Volumel × b × ha³
Total surface area2(lb + bh + hl)6a²
Lateral surface area2(l + b) × h4a²
Diagonal√(l² + b² + h²)a√3

1 m³ = 1,000 litres. Walls of a room use lateral surface area, 2(l + b) × h.

— Rule to remember

Key takeaways: use lateral area for walls and total area for a closed box; convert m³ to litres by multiplying by 1,000; and be careful with open tanks.

Read the full lesson

Lesson 4

Cylinders, cones and spheres

Round solids
SolidVolumeCurved surface areaTotal surface area
Cylinder (r, h)πr²h2πrh2πr(r + h)
Cone (r, h, slant l)⅓πr²hπrlπr(l + r)
Sphere (r)4/3 πr³4πr²4πr²

Cone volume is one third of the cylinder with the same base and height. Slant height = √(r² + h²).

— Rule to remember

Key takeaways: write the formula first; find the slant height for cones; and simplify by cancelling 7s with 22/7.

Read the full lesson

Lesson 5

Mixed mensuration problems

When a solid is melted and recast, volume stays the same. A path inside a rectangle reduces each side by twice its width.

— Rule to remember

Key takeaways: volume is conserved when recasting; reduce each dimension by twice the width for an inside path; and always convert units before multiplying costs.

Read the full lesson

Lesson 6

Cross-paths, borders and carpets: speed methods

Path formulas
SituationArea of the path (field l × b, path width w)
Border outside a rectangle(l + 2w)(b + 2w) - lb, which equals 2w(l + b) + 4w²
Border inside a rectanglelb - (l - 2w)(b - 2w), which equals 2w(l + b) - 4w²
Two roads crossing in the middle (one parallel to each side)w(l + b - w): the central square is counted twice, so w² is taken out once
Circular path around a circle of radius rπ((r + w)² - r²) = πw(2r + w)

A border changes each side by 2w; crossing roads share a square that is counted once.

— Rule to remember
  • Outside border: 2w(l + b) + 4w²; inside: 2w(l + b) - 4w².
  • Crossing roads: w(l + b - w).
  • Circular path: πw(2r + w).
Read the full lesson

Lesson 7

Percentage changes in length, area and volume

Scale effects
Lengths change byArea factorArea changeVolume factorVolume change
+10%1.21+21%1.331+33.1%
+20%1.44+44%1.728+72.8%
+50%2.25+125%3.375+237.5%
-20%0.64-36%0.512-48.8%
Doubled4+300%8+700%

Length factor f: perimeter f, area f², volume f³; percentage change = (factor - 1) × 100.

— Rule to remember
  • Convert each percentage to a factor and multiply.
  • Area uses the square, volume the cube.
  • To keep the area fixed, the other dimension takes the reciprocal factor.
Read the full lesson

Lesson 8

Pipes, tanks and flowing water

Rate in = cross-section × speed; rates add, times do not.

— Rule to remember
  • Flow per unit time = A × v.
  • Time = volume ÷ rate.
  • Combine pipes by adding fractions of the tank per hour; subtract an outlet.
Read the full lesson

Lesson 9

Mixed mensuration practice: spotting the traps

Underline what is asked, and mark whether each length is a radius or a diameter before you calculate.

— Habit
  • The same five traps appear repeatedly.
  • Perimeter of a sector = arc + two radii.
  • Recasting: equate volumes; π usually cancels.
Read the full lesson

Privacy · Terms · Refunds · Delivery