- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Pipes and cisterns foundation
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 25 minutes, with a pencil and paper for the working. Do not look at the answers until you have finished. These questions mix the ideas of all five lessons and are a little harder than the lesson checks. Then read every explanation, including the ones you got right.
Final self-assessment
-
1. A pipe fills 2/7 of an empty tank in 4 hours. How much longer will it take to fill the rest of the tank?
- 14 hours
- 6 hours
- 10 hours
- 8 hours
Show answer
Answer: C. Part per hour = (2/7) ÷ 4 = 1/14, so the whole tank takes 14 hours. The rest is 1 − 2/7 = 5/7, which takes (5/7) ÷ (1/14) = 10 hours.
-
2. An outlet empties a full tank in 18 hours. The tank is 2/3 full when the outlet is opened. How long does it take to empty?
- 12 hours
- 6 hours
- 18 hours
- 27 hours
Show answer
Answer: A. The outlet removes 1/18 per hour. Water present = 2/3. Time = (2/3) ÷ (1/18) = 2/3 × 18 = 12 hours.
-
3. A tap fills a bucket in 25 minutes. How many such buckets can it fill in one hour?
- 2.5 buckets
- 1.5 buckets
- 3 buckets
- 2.4 buckets
Show answer
Answer: D. The tap fills 1/25 of a bucket per minute. In 60 minutes it fills 60/25 = 2.4 buckets.
-
4. Pipes A, B and C fill a tank in 15, 10 and 30 hours respectively. How long do all three take together?
- 6 hours
- 5 hours
- 18.3 hours
- 4 hours
Show answer
Answer: B. Capacity = LCM(15, 10, 30) = 30 units. Rates: 2 + 3 + 1 = 6 units per hour. Time = 30 ÷ 6 = 5 hours.
-
5. Pipe A fills a tank in 8 hours and pipe B in 24 hours. Both are opened on an empty tank. What part of the tank is full after 4 hours?
- 2/3
- 1/2
- 1/3
- 5/6
Show answer
Answer: A. Together per hour: 1/8 + 1/24 = 3/24 + 1/24 = 4/24 = 1/6. In 4 hours: 4 × 1/6 = 2/3 of the tank.
-
6. Five identical pipes together fill a tank in 6 hours. How long would one of these pipes take alone?
- 1.2 hours
- 11 hours
- 15 hours
- 30 hours
Show answer
Answer: D. Together the five fill 1/6 per hour, so one pipe fills 1/6 ÷ 5 = 1/30 per hour. One pipe alone takes 30 hours.
-
7. Pipes fill a tank in 12, 16 and 24 hours respectively. All three are opened together. How long does the tank take to fill?
- 5 h 30 min
- 6 h
- 5 h 20 min
- 4 h 48 min
Show answer
Answer: C. Capacity = LCM(12, 16, 24) = 48 units. Rates: 4 + 3 + 2 = 9 units per hour. Time = 48 ÷ 9 = 16/3 hours = 5 hours 20 minutes.
-
8. Pipes A and B fill a tank in 18 hours and 27 hours. They fill an empty tank together. What fraction of the water comes through B?
- 3/5
- 2/5
- 1/3
- 2/3
Show answer
Answer: B. Capacity = LCM(18, 27) = 54 units. A = 3 units per hour, B = 2 units per hour. Working the same time, they share the tank 3 : 2, so B supplies 2/5.
-
9. Pipes fill a tank in 9 hours and 12 hours. Using the LCM method, how long do they take together?
- 21/2 hours
- 7 hours
- 36/5 hours
- 36/7 hours
Show answer
Answer: D. Capacity = LCM(9, 12) = 36 units. Rates: 4 + 3 = 7 units per hour. Time = 36/7 hours, a little over 5 hours 8 minutes.
-
10. An inlet fills a tank in 6 hours and an outlet empties it in 9 hours. Both are opened on an empty tank. How long does the tank take to fill?
- 18 hours
- 3.6 hours
- 15 hours
- 9 hours
Show answer
Answer: A. Net per hour = 1/6 − 1/9 = 3/18 − 2/18 = 1/18, so the tank fills in 18 hours. Shortcut: 54 ÷ 3 = 18 hours.
-
11. A full tank has one inlet that fills it in 15 hours and two outlets that empty it in 10 hours and 30 hours. All three are opened. How long does the tank take to empty?
- 30 hours
- 10 hours
- 15 hours
- 7.5 hours
Show answer
Answer: C. Capacity = 30 units. Inlet +2, outlets −3 and −1. Net = 2 − 3 − 1 = −2 units per hour, so the tank empties. Time = 30 ÷ 2 = 15 hours.
-
12. Inlets A and B fill a tank in 8 hours and 12 hours, and outlet C empties it in 6 hours. The tank is half full and all three are opened. What happens?
- It empties in 12 hours
- It fills in 12 hours
- It fills in 24 hours
- The level stays at half
Show answer
Answer: B. Capacity = 24 units. Net = 3 + 2 − 4 = +1 unit per hour, so the tank fills. Half the tank = 12 units, so it needs 12 ÷ 1 = 12 hours.
-
13. A pipe fills a tank in 10 hours. Because of a leak it takes 12 hours. In how many hours can the leak alone empty the full tank?
- 22 hours
- 2 hours
- 30 hours
- 60 hours
Show answer
Answer: D. Leak rate = 1/10 − 1/12 = 6/60 − 5/60 = 1/60 per hour, so the leak empties the tank in 60 hours. Shortcut: 120 ÷ 2 = 60 hours.
-
14. A pipe fills a tank in 6 hours. A leak alone can empty the full tank in 18 hours. How long does the pipe take to fill the empty tank with the leak open?
- 9 hours
- 12 hours
- 4.5 hours
- 24 hours
Show answer
Answer: A. Net rate = 1/6 − 1/18 = 3/18 − 1/18 = 2/18 = 1/9 per hour, so the tank fills in 9 hours.
-
15. Two pipes fill a tank in 10 hours and 15 hours when working together without any leak. Because of a leak, the two together take 8 hours. In how many hours can the leak alone empty the full tank?
- 14 hours
- 48 hours
- 24 hours
- 12 hours
Show answer
Answer: C. Without the leak the pipes take (10 × 15) ÷ 25 = 6 hours. Leak rate = 1/6 − 1/8 = 4/24 − 3/24 = 1/24 per hour, so the leak alone needs 24 hours.
Questions 1-3: lesson 1 (rates and partly full tanks). Questions 4-6: lesson 2 (pipes together). Questions 7-9: lesson 3 (the LCM method). Questions 10-12: lesson 4 (inlets and outlets together). Questions 13-15: lesson 5 (leaks).
Sign in to keep track of the lessons you finish.