• Practice
  • About 14 min
  • 5 practice questions

Leaks, flows and capacity in litres

Find a tank's capacity in litres when a leak, a tap or a difference in flow is given in litres per minute or per hour.

If something looks wrong, please tell us.

Fraction questions tell you how long pipes take. Litre questions add one real quantity, such as 'a tap lets in 6 litres a minute', and ask for the tank's capacity. The trick is to find what fraction of the tank that known flow represents, then scale up.

The bridge between fractions and litres

If a pipe handles a fraction f of the tank per hour and you know it also handles L litres per hour, then f of the tank is L litres, so the whole tank is L ÷ f litres. Most questions hide f inside a difference: two times for the same tank, or two pipes whose flows differ by a known number of litres.

What is given in litresFind this fraction firstCapacity
A tap's flow, with a leak working against itLeak rate − net rateTap's litres per hour ÷ that fraction
How much faster A flows than BA's rate − B's rateDifference in litres ÷ that fraction
A leak's flow, from times with and without itNormal rate − rate with leakLeak's litres per hour ÷ that fraction

Worked example 1: a leak and a tap

A leak at the bottom of a tank can empty the full tank in 8 hours. A tap that lets in 6 litres a minute is opened, and now the full tank empties in 12 hours. What is the capacity? Leak rate = 1/8 per hour; with the tap the net emptying rate is 1/12 per hour. So the tap supplies 1/8 − 1/12 = 3/24 − 2/24 = 1/24 of the tank per hour. In litres, the tap gives 6 × 60 = 360 litres per hour. Capacity = 360 × 24 = 8,640 litres. Check: the leak removes 8,640 ÷ 8 = 1,080 litres per hour; net loss = 1,080 − 360 = 720 litres per hour; 8,640 ÷ 720 = 12 hours. Correct.

Worked example 2: two pipes whose flows differ

Pipe A fills a tank in 20 minutes and pipe B in 30 minutes. A delivers 5 litres a minute more than B. What is the capacity? Per minute, A fills 1/20 and B fills 1/30; the difference is 1/20 − 1/30 = 1/60 of the tank. That difference is 5 litres, so the tank holds 5 × 60 = 300 litres. Check: A gives 300 ÷ 20 = 15 litres a minute and B gives 10; the difference is 5.

Worked example 3: a leak measured in litres

A pipe fills a tank in 10 hours. Because of a leak, it takes 12 hours. The leak drains 15 litres an hour. Leak rate = 1/10 − 1/12 = 1/60 of the tank per hour, which is 15 litres. Capacity = 15 × 60 = 900 litres.

Trap: minutes and hours

In worked example 1 the tap was in litres per minute but the times were in hours. Converting 6 litres a minute to 360 litres an hour before multiplying is essential. Using 6 × 24 would give 144 litres, a classic wrong option.

Capacity = (litres per hour handled by a pipe or a difference) ÷ (fraction of the tank it handles per hour). Put flows and times in the same unit before multiplying.

Key takeaways

  • Find the fraction of the tank that matches the known flow in litres.
  • That fraction usually comes from a difference: leak minus net, or one pipe minus another.
  • Convert litres per minute to litres per hour (× 60) when the times are in hours.
  • Always check by working the litres forward to the given time.

Check your understanding

  1. 1. A leak can empty a full tank in 6 hours. A tap letting in 4 litres a minute is opened, and the full tank now empties in 10 hours. What is the capacity of the tank?

    1. 3,600 litres
    2. 2,400 litres
    3. 1,440 litres
    4. 4,800 litres
    Show answer

    Answer: A. Tap's share = 1/6 − 1/10 = 5/30 − 3/30 = 1/15 of the tank per hour. The tap gives 4 × 60 = 240 litres per hour. Capacity = 240 × 15 = 3,600 litres.

  2. 2. Pipe A fills a tank in 12 minutes and pipe B in 18 minutes. A delivers 4 litres a minute more than B. What is the capacity of the tank?

    1. 72 litres
    2. 120 litres
    3. 144 litres
    4. 216 litres
    Show answer

    Answer: C. Difference per minute = 1/12 − 1/18 = 3/36 − 2/36 = 1/36 of the tank, and it equals 4 litres. Capacity = 4 × 36 = 144 litres (A gives 12 and B 8 litres a minute).

  3. 3. A pipe fills a tank in 5 hours, but because of a leak it takes 6 hours. The leak drains 20 litres an hour. What is the capacity?

    1. 100 litres
    2. 600 litres
    3. 120 litres
    4. 1,200 litres
    Show answer

    Answer: B. Leak rate = 1/5 − 1/6 = 1/30 of the tank per hour, which is 20 litres. Capacity = 20 × 30 = 600 litres.

  4. 4. A tank holds 1,200 litres. An inlet adds 40 litres a minute and an outlet removes 25 litres a minute. Both are opened on the empty tank. How long does it take to fill?

    1. 30 minutes
    2. 48 minutes
    3. 60 minutes
    4. 80 minutes
    Show answer

    Answer: D. Net gain = 40 − 25 = 15 litres per minute. Time = 1,200 ÷ 15 = 80 minutes.

  5. 5. An inlet fills a 400-litre tank in 20 minutes. Because of a leak, it now takes 25 minutes. At what rate does the leak drain water?

    1. 4 L/min
    2. 5 L/min
    3. 16 L/min
    4. 3.2 L/min
    Show answer

    Answer: A. Inlet flow = 400 ÷ 20 = 20 litres a minute. Net flow with the leak = 400 ÷ 25 = 16 litres a minute. Leak = 20 − 16 = 4 litres a minute.

Privacy · Terms · Refunds · Delivery