Revision notes

Pipes and Cisterns: Practice

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Finding a missing pipe's time from the combined time

StatementRate of A : rate of B
A is twice as fast as B2 : 1
A is three times as fast as B3 : 1
A is 50% more efficient than B3 : 2
A is 25% more efficient than B5 : 4
A takes half the time B takes2 : 1

Missing rate = combined rate − known rates. For two pipes: the other pipe's time = aT ÷ (a − T). Faster means a larger rate and a smaller time; rates and times are in inverse ratio.

  • Subtract rates (or units per hour), never times.
  • If the net rate is smaller than the inlets' total, the difference is the outlet's rate.
  • Change efficiency statements into a rate ratio, give the units, then find the capacity from the combined time.
  • Sense check: a single pipe is always slower than the group it belongs to (when all pipes are inlets).
Read the full lesson

Lesson 2

Pipes closed part-way through the filling

Stage by stage: units filled in each stage add up to the capacity. 'Closed after t hours' fixes when the second stage starts; 'closed t hours before full' means that pipe works for (T − t) hours.

  • One capacity, many stages: compute units filled stage by stage.
  • To find when to close a pipe, first count what the pipe that runs throughout contributes.
  • For 'before the tank is full', use the unknown total time T in one equation.
  • Read whether the question wants the total time or only the time after the change.
Read the full lesson

Lesson 3

Pipes opened at different times

IntervalPipes openUnits per hourUnits addedTotal so far
9 am to 10 amA333
10 am to 11 amA, B558
From 11 amA, B, C628 needed36

Draw a timeline. Units in each interval = net rate × time. A pipe opened late works for (total time − delay); an outlet opened halfway affects only the second half.

  • Fill a table of intervals, pipes open, rate and units added.
  • Clock-time questions: find the hours needed, then add them to the starting time.
  • To find when to open a late pipe, count what the early pipe does in the whole time first.
  • A leak or outlet that starts partway affects only the part of the tank filled after it starts.
Read the full lesson

Lesson 4

Leaks, flows and capacity in litres

What is given in litresFind this fraction firstCapacity
A tap's flow, with a leak working against itLeak rate − net rateTap's litres per hour ÷ that fraction
How much faster A flows than BA's rate − B's rateDifference in litres ÷ that fraction
A leak's flow, from times with and without itNormal rate − rate with leakLeak's litres per hour ÷ that fraction

Capacity = (litres per hour handled by a pipe or a difference) ÷ (fraction of the tank it handles per hour). Put flows and times in the same unit before multiplying.

  • Find the fraction of the tank that matches the known flow in litres.
  • That fraction usually comes from a difference: leak minus net, or one pipe minus another.
  • Convert litres per minute to litres per hour (× 60) when the times are in hours.
  • Always check by working the litres forward to the given time.
Read the full lesson

Lesson 5

Speed methods and common traps in pipe questions

TrapWhat goes wrongFix
Averaging or adding timesPipes of 10 h and 15 h 'together take 12.5 h'Add rates: 1/10 + 1/15 = 1/6, so 6 h
Mixed unitsOne pipe in hours, another in minutesConvert everything to one unit first
Partly full tankUsing the whole tank when it is already 1/3 fullFill only the part that is empty
'x hours longer'Using x as the new timeNew time = old time + x
After versus beforeTreating 'closed 3 h before full' as 'after 3 h'Use T − 3 for that pipe
Sign of the net rateSaying the tank fills when the outlet is fasterCheck whether net is positive

Times in ratio a : b mean rates in ratio b : a. Identical pipes: pipes × time is constant. Before calculating, use bounds to strike out impossible options.

  • Turn every comparison into a rate ratio and give units directly.
  • Pipe-minutes handle 'more pipes, less time' in one line.
  • Bounds checks catch most traps and can find the answer outright.
  • Read the question twice for units, partly full tanks and 'before' or 'after'.
Read the full lesson

Privacy · Terms · Refunds · Delivery