• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Nanotechnology revision

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before you look at any answer. Note the ones you got wrong or guessed, then read the explanations and go back to the lesson named at the end.

Final self-assessment

  1. 1. Which size is the largest?

    1. 7 × 10⁻⁸ m
    2. 650 Å
    3. 0.06 µm
    4. 90 nm
    Show answer

    Answer: D. Convert to nm: 7 × 10⁻⁸ m = 70 nm; 650 Å = 65 nm; 0.06 µm = 60 nm; 90 nm. The largest is 90 nm.

  2. 2. Quantum dots, nanowires and graphene are respectively:

    1. 0D, 1D and 2D nanomaterials
    2. 1D, 2D and 0D nanomaterials
    3. 2D, 1D and 0D nanomaterials
    4. 0D, 2D and 1D nanomaterials
    Show answer

    Answer: A. Quantum dots are small in all directions (0D); nanowires are long in one direction (1D); graphene is a sheet large in two directions (2D).

  3. 3. A width of 0.34 nm, roughly the spacing of graphite layers, is equal to:

    1. 34 Å
    2. 0.034 Å
    3. 3.4 Å
    4. 340 Å
    Show answer

    Answer: C. 1 nm = 10 Å, so 0.34 nm = 3.4 Å.

  4. 4. Particles of radius 100 nm are ground to radius 4 nm. Their SA:V increases by a factor of:

    1. 4
    2. 25
    3. 100
    4. 625
    Show answer

    Answer: B. SA:V = 3/r, so it varies inversely with radius. 100 ÷ 4 = 25, so the ratio becomes 25 times larger.

  5. 5. A particle is broken into 27 equal smaller particles. The total surface area becomes:

    1. 3 times the original
    2. 9 times the original
    3. 27 times the original
    4. The same
    Show answer

    Answer: A. Total surface rises by the cube root of the number of pieces. The cube root of 27 is 3.

  6. 6. Consider: (1) A smaller quantum dot has a larger band gap. (2) A smaller quantum dot emits light of longer wavelength. Which is/are correct?

    1. 1 only
    2. 2 only
    3. Both 1 and 2
    4. Neither 1 nor 2
    Show answer

    Answer: A. A smaller dot has a larger band gap, so it emits higher-energy, shorter-wavelength (bluer) light. Statement 2 is the reverse of the truth.

  7. 7. Which pair of events is in the correct order (earlier first)?

    1. Graphene isolated → STM invented
    2. C₆₀ discovered → Feynman's talk
    3. Taniguchi's word → STM invented
    4. Quantum-dot Nobel Prize → graphene Nobel Prize
    Show answer

    Answer: C. Taniguchi used the word in 1974 and the STM followed in 1981. The other pairs are reversed: STM 1981 before graphene 2004; Feynman 1959 before C₆₀ 1985; graphene prize 2010 before quantum-dot prize 2023.

  8. 8. To study the internal structure of a very thin slice of a nanoparticle sample, the most suitable instrument is the:

    1. Atomic force microscope
    2. Scanning tunnelling microscope
    3. Optical microscope
    4. Transmission electron microscope
    Show answer

    Answer: D. A TEM sends electrons through a very thin sample to show internal structure. The AFM and STM map surfaces, and an optical microscope cannot resolve nanoscale detail.

  9. 9. The Nobel Prize for fullerenes came how many years after their discovery?

    1. 6 years
    2. 11 years
    3. 15 years
    4. 21 years
    Show answer

    Answer: B. Fullerenes were discovered in 1985 and the Chemistry prize came in 1996: 1996 − 1985 = 11 years.

  10. 10. Consider: (1) Diamond and graphene are both made only of carbon. (2) Diamond and graphene both conduct electricity well. (3) A fullerene is a closed cage. Which are correct?

    1. 1 and 2 only
    2. 2 and 3 only
    3. 1, 2 and 3
    4. 1 and 3 only
    Show answer

    Answer: D. Statements 1 and 3 are true. Statement 2 is false: diamond is an insulator, while graphene is an excellent conductor.

  11. 11. Whether a carbon nanotube behaves like a metal or a semiconductor depends mainly on:

    1. The way the carbon sheet is rolled
    2. The colour of light shone on it
    3. Whether it contains silver
    4. Its total mass
    Show answer

    Answer: A. The angle and manner in which the honeycomb sheet is rolled into a tube decide whether a nanotube is metal-like or semiconducting.

  12. 12. Which nanomaterial is correctly matched with its common use?

    1. Nano zinc oxide - antibacterial wound dressings
    2. Nanosilver - clear sunscreens
    3. Lipid nanoparticles - carrying mRNA into cells
    4. Diamond - lubricant in locks
    Show answer

    Answer: C. Lipid nanoparticles carry nucleic acids such as mRNA into cells. Nano zinc oxide is used in sunscreens, nanosilver in antibacterial products, and graphite (not diamond) as a lubricant.

  13. 13. Which application relies mainly on particles being too small to scatter visible light much?

    1. Nanoparticle catalysts
    2. Clear mineral sunscreens
    3. Carbon nanotube composites
    4. Nanosilver socks
    Show answer

    Answer: B. Nano zinc oxide or titanium dioxide particles are much smaller than visible wavelengths, so they scatter little visible light and look clear, while still absorbing ultraviolet light.

  14. 14. Consider: (1) Ball milling is a bottom-up method. (2) Self-assembly is a bottom-up method. (3) Lithography is a top-down method. Which are correct?

    1. 1 and 2 only
    2. 1 and 3 only
    3. 1, 2 and 3
    4. 2 and 3 only
    Show answer

    Answer: D. Ball milling grinds bulk material down, so it is top-down, making statement 1 false. Self-assembly is bottom-up and lithography is top-down, so 2 and 3 are correct.

  15. 15. Why is regulating nanomaterials difficult?

    1. Nanomaterials are all harmless, so no rules are needed
    2. Hazard can depend on size, shape and coating, not just chemical identity, and nanoparticles are hard to measure
    3. Nanomaterials cannot be made in factories
    4. All nanomaterials are banned everywhere
    Show answer

    Answer: B. Two forms of the same chemical can behave differently, so rules based on chemical identity alone may miss risks; detecting and measuring nanoparticles in products is also hard.

Questions 1-3: lesson 1 (scale, units and dimensions). Questions 4-6: lesson 2 (surface area and quantum effects). Questions 7-9: lesson 3 (timeline and tools). Questions 10-12: lesson 4 (comparing nanomaterials). Questions 13-15: lesson 5 (applications, methods, risks and policy).

Privacy · Terms · Refunds · Delivery