• Practice
  • About 14 min
  • 5 practice questions

Scale and units: fast conversions, size ordering and 0D, 1D and 2D nanomaterials

Convert between m, µm, nm and Å in seconds using powers of ten, put mixed-unit sizes in order, and classify nanomaterials by how many dimensions are nanoscale.

If something looks wrong, please tell us.

Many nanotechnology questions are really unit questions in disguise: a size is given in metres, micrometres or ångström, and you must decide whether it is 'nano' or which of several objects is smallest. A quick, reliable method saves time and avoids the most common slip - being off by a factor of a thousand.

The power-of-ten ladder

Convert everything to nanometres first
UnitValue in metresValue in nanometres
1 millimetre (mm)10⁻³ m10⁶ nm (a million)
1 micrometre (µm)10⁻⁶ m10³ nm (a thousand)
1 nanometre (nm)10⁻⁹ m1 nm
1 ångström (Å)10⁻¹⁰ m0.1 nm

Speed method: to turn metres into nanometres, add 9 to the power of ten. 3 × 10⁻⁸ m → 3 × 10¹ nm = 30 nm. To turn Å into nm, divide by 10.

Worked example 1: is it nano?

Which of these lies inside the usual 1-100 nm range: (a) 2.5 × 10⁻⁸ m, (b) 0.4 µm, (c) 5 Å, (d) 2 × 10⁻⁶ m? Working: (a) 2.5 × 10⁻⁸ m = 2.5 × 10¹ nm = 25 nm - inside. (b) 0.4 µm = 400 nm - too large. (c) 5 Å = 0.5 nm - below 1 nm, atomic size. (d) 2 × 10⁻⁶ m = 2 µm = 2,000 nm - far too large. Only (a) is in the range.

Worked example 2: ordering mixed units

Arrange from smallest to largest: 0.5 µm, 300 nm, 4 × 10⁻⁷ m, 6,000 Å. Working: convert all to nm. 0.5 µm = 500 nm; 300 nm stays; 4 × 10⁻⁷ m = 4 × 10² nm = 400 nm; 6,000 Å = 600 nm. Order: 300 nm < 4 × 10⁻⁷ m < 0.5 µm < 6,000 Å.

Classifying by dimensions

A material counts as nanomaterial if at least one of its three dimensions is in the nanoscale. A common classification counts how many dimensions are not nanoscale:

0D, 1D and 2D nanomaterials
ClassWhich dimensions are nanoscaleExamples
Zero-dimensional (0D)All threeNanoparticles, quantum dots, fullerenes
One-dimensional (1D)Two (it is long in one direction)Carbon nanotubes, nanowires, nanorods
Two-dimensional (2D)One (it is a thin sheet)Graphene, other single-layer sheets, ultra-thin films
Three-dimensional (3D) nanostructuredNone overall, but built from nanoscale partsNanocomposites, bulk materials with nanoscale grains

Trap: the label counts the dimensions that are large, not the nanoscale ones. A nanotube is called 1D because only its length is large; graphene is 2D because only its thickness is nanoscale.

Common traps

  • µm and nm: a micrometre (micron) is a thousand times a nanometre, not ten times.
  • Å and nm: an ångström is smaller - 10 Å make 1 nm.
  • 'Nano' in a product name does not prove that nanoparticles are inside; check the size.
  • Comparisons such as 'a hair is about 80,000-100,000 nm wide' or 'DNA is about 2 nm wide' are approximate illustrations, not exact constants.

Key takeaways: convert everything to nanometres first (add 9 to the power of ten from metres; divide ångström by 10). At least one dimension in about 1-100 nm makes a nanomaterial. 0D = small in all directions, 1D = tubes and wires, 2D = sheets.

Check your understanding

  1. 1. Which of these sizes falls within the usual 1-100 nm range of nanotechnology?

    1. 0.8 µm
    2. 8 × 10⁻⁸ m
    3. 3 Å
    4. 5 × 10⁻⁶ m
    Show answer

    Answer: B. 8 × 10⁻⁸ m = 8 × 10¹ nm = 80 nm, inside the range. 0.8 µm = 800 nm and 5 × 10⁻⁶ m = 5,000 nm are too large; 3 Å = 0.3 nm is atomic size.

  2. 2. Arrange from smallest to largest: P = 0.02 µm, Q = 150 Å, R = 3 × 10⁻⁸ m.

    1. P, Q, R
    2. R, Q, P
    3. Q, P, R
    4. Q, R, P
    Show answer

    Answer: C. Convert to nm: P = 0.02 × 1,000 = 20 nm; Q = 150 ÷ 10 = 15 nm; R = 3 × 10⁻⁸ m = 30 nm. Order: Q (15) < P (20) < R (30).

  3. 3. A carbon nanotube is classed as a one-dimensional nanomaterial because:

    1. Only its thickness is in the nanoscale
    2. All three of its dimensions are in the nanoscale
    3. It has only one carbon atom along its length
    4. Two of its dimensions are nanoscale and only its length is large
    Show answer

    Answer: D. A nanotube is nanoscale across (two dimensions) and long in one direction. The '1D' label counts the one large dimension.

  4. 4. Graphene is an example of a:

    1. Zero-dimensional nanomaterial
    2. One-dimensional nanomaterial
    3. Two-dimensional nanomaterial
    4. Material that is not nanoscale in any dimension
    Show answer

    Answer: C. Graphene is a sheet one atom thick: only its thickness is nanoscale, while its length and width can be large, so it is two-dimensional.

  5. 5. 2.5 × 10⁻⁹ m expressed in ångström is:

    1. 2.5 Å
    2. 250 Å
    3. 0.25 Å
    4. 25 Å
    Show answer

    Answer: D. 2.5 × 10⁻⁹ m = 2.5 nm. Since 1 nm = 10 Å, 2.5 nm = 25 Å.

Privacy · Terms · Refunds · Delivery