- Foundation
- About 15 min
- 5 practice questions
Nuclear fission, nuclear fusion and the chain reaction
Tell fission from fusion, explain how a chain reaction grows, what critical mass means, and why a bomb and a power reactor use the same reaction in different ways.
If something looks wrong, please tell us.
There are two ways to release energy from nuclei: split a heavy one or join two light ones. Splitting is fission and joining is fusion. Fission runs every nuclear power station in the world today; fusion powers the Sun. Questions often ask you to match each process to its fuel, its conditions and its uses, so learn them side by side.
Where the energy comes from
In both processes the particles produced weigh very slightly less than the particles that went in. The missing mass has turned into energy, as described by Albert Einstein's equation E = mc² (energy = mass × the square of the speed of light). Because the speed of light is so large (about 300,000 km per second), a tiny loss of mass gives a huge amount of energy.
Nuclear fission
Fission was discovered in 1938 by Otto Hahn and Fritz Strassmann in Germany; Lise Meitner and Otto Frisch explained it as the splitting of the nucleus. When a uranium-235 nucleus absorbs a slow neutron, it becomes unstable and splits into two smaller nuclei, releasing a large amount of energy and two or three new neutrons. One typical split is: uranium-235 + 1 neutron → barium-141 + krypton-92 + 3 neutrons + energy. Check the totals: mass numbers 235 + 1 = 236 and 141 + 92 + 3 = 236; protons 92 = 56 + 36.
The chain reaction and critical mass
The new neutrons can split more uranium-235 nuclei, which release more neutrons, and so on. This self-sustaining process is a chain reaction. The first man-made self-sustaining chain reaction was achieved in 1942 in Chicago by a team led by Enrico Fermi.
A chain reaction keeps going only if enough neutrons cause new fissions instead of escaping or being absorbed. In a small lump, too many neutrons escape through the surface. The smallest mass of fissile material that can sustain a chain reaction is the critical mass. Below it the reaction dies out (subcritical); at it the reaction holds steady (critical); above it the reaction grows (supercritical).
Worked example 1: how fast a chain grows
Suppose every fission releases 2 neutrons and both cause a new fission. Start with one fission. Working: generation 1 has 2 fissions, generation 2 has 4, generation 3 has 8 - the number doubles each time, so generation n has 2 to the power n. After 10 generations: 2¹⁰ = 1,024 fissions. After 20 generations: 2²⁰ = 1,048,576, more than a million. Each generation takes a tiny fraction of a second, which is why an uncontrolled chain reaction becomes an explosion.
Bomb versus reactor
| Item | Atomic bomb | Nuclear power reactor |
|---|---|---|
| Chain reaction | Uncontrolled: grows in a split second | Controlled: held steady |
| Neutrons | Almost every neutron allowed to cause fission | Extra neutrons absorbed by control rods |
| Fuel | Very highly enriched uranium-235 or plutonium-239 | Natural or slightly enriched uranium |
| Result | Explosion | Steady heat to make electricity |
Nuclear fusion
In fusion, light nuclei such as isotopes of hydrogen join to form a heavier nucleus, releasing energy. The Sun and the stars shine because hydrogen fuses into helium in their cores. A reaction studied for future power is deuterium + tritium → helium-4 + 1 neutron + energy (check: mass numbers 2 + 3 = 4 + 1). Fusion needs temperatures of many millions of degrees so that the positively charged nuclei come close enough to join. The hydrogen bomb uses fusion; controlled fusion for electricity is still being researched, for example in the international ITER project in France, of which India is a member.
| Item | Fission | Fusion |
|---|---|---|
| What happens | A heavy nucleus splits | Light nuclei join |
| Typical fuel | Uranium-235, plutonium-239 | Deuterium, tritium |
| Conditions | Slow neutrons; critical mass | Extremely high temperature and pressure |
| Natural example | None in everyday life | The Sun and stars |
| Power stations | In use for decades | Still experimental |
Fission splits heavy nuclei; fusion joins light ones. Both turn a little mass into a lot of energy: E = mc². Critical mass = the least mass that sustains a chain reaction.
Key takeaways: fission (discovered 1938) splits uranium-235 and releases 2-3 neutrons, which make a chain reaction possible above the critical mass. A bomb lets the chain run wild; a reactor controls it. Fusion joins light nuclei, powers the Sun and needs millions of degrees.
Check your understanding
-
1. The energy of the Sun comes mainly from:
- Fission of uranium in its core
- Burning of hydrogen gas with oxygen
- Radioactive decay of radium
- Fusion of hydrogen nuclei into helium
Show answer
Answer: D. The Sun's core is hot and dense enough for hydrogen nuclei to fuse into helium, releasing energy. Ordinary burning needs oxygen and could not power the Sun.
-
2. The smallest amount of fissile material that can sustain a chain reaction is called its:
- Critical mass
- Half-life
- Mass number
- Binding mass
Show answer
Answer: A. Below the critical mass, too many neutrons escape and the chain reaction dies out. Half-life and mass number are unrelated ideas.
-
3. In a fission chain reaction each fission releases 2 neutrons and each neutron causes one new fission. Starting from one fission, how many fissions occur in the 10th generation?
- 20
- 512
- 1,024
- 100
Show answer
Answer: C. The number doubles every generation, so generation 10 has 2¹⁰ = 1,024 fissions.
-
4. The first self-sustaining nuclear chain reaction was achieved in 1942 by a team led by:
- Otto Hahn
- Enrico Fermi
- Homi J. Bhabha
- Henri Becquerel
Show answer
Answer: B. Enrico Fermi's team achieved the first self-sustaining chain reaction in Chicago in 1942. Otto Hahn co-discovered fission in 1938.
-
5. How does a nuclear power reactor differ from an atomic bomb?
- The reactor uses fusion and the bomb uses fission
- The reactor's chain reaction is kept steady by absorbing extra neutrons
- The reactor needs no neutrons at all
- The bomb works without reaching critical mass
Show answer
Answer: B. Both use fission chain reactions. In a reactor, control rods absorb surplus neutrons so the reaction stays steady; in a bomb the chain is allowed to grow uncontrolled above critical mass.
Sign in to keep track of the lessons you finish.