• Practice
  • About 15 min
  • 5 practice questions

Reactor components and reactor types: a revision table with matching practice

Match every reactor part to its job and materials, tell fissile from fertile isotopes, and identify PHWR, BWR, PWR, fast breeder and graphite reactors from their features.

If something looks wrong, please tell us.

Matching questions on reactors look long but test a short list of facts: which material moderates, which absorbs, which cools, and which reactor type uses which combination. The safest way to revise is one master table, then the traps that examiners build from it.

Master table: reactor parts

Reactor parts
PartJobMaterialsRemember
FuelFission, giving heatUranium dioxide pellets; plutonium or mixed oxide in breedersNatural uranium is about 0.7% uranium-235
ModeratorSlows neutronsHeavy water, light water, graphiteLight nuclei that absorb few neutrons
Control rodsAbsorb neutronsBoron, cadmiumIn = slower, out = faster
CoolantRemoves heatHeavy water, light water, liquid sodium, carbon dioxideSodium only in fast reactors
ReflectorBounces escaping neutrons back into the coreOften the moderator material, such as graphite or waterSaves neutrons
ContainmentHolds radioactive material in an accidentThick reinforced concrete and steelLast physical barrier

Fissile and fertile

A fissile isotope can be split by slow neutrons and can sustain a chain reaction: uranium-235, plutonium-239 and uranium-233. A fertile isotope cannot sustain a chain reaction but becomes fissile after absorbing a neutron: uranium-238 becomes plutonium-239, and thorium-232 becomes uranium-233. Uranium-235 is the only fissile isotope found in useful amounts in nature.

Enrichment means raising the share of uranium-235 above the natural 0.7 per cent. Light-water power reactors use low-enriched uranium of a few per cent; weapons need very highly enriched uranium, around 90 per cent. PHWRs avoid enrichment altogether, which is one reason India chose them for its first stage.

Master table: reactor types

Reactor types
TypeFuelModeratorCoolantAssociated with
PHWRNatural uraniumHeavy waterHeavy waterCanada's CANDU design; most Indian reactors
BWREnriched uraniumLight waterLight water (boils in core)Tarapur units 1 and 2
PWR (VVER is the Russian design)Enriched uraniumLight waterLight water under pressureKudankulam (VVER)
Fast breederPlutonium-uranium mixed fuelNoneLiquid sodiumKalpakkam, Tamil Nadu
RBMKEnriched uraniumGraphiteLight waterChernobyl, 1986

Worked example 1: identify the reactor

A reactor has no moderator, is cooled by a liquid metal and produces more fissile material than it consumes. Name it. Working: no moderator means fast neutrons; liquid metal coolant means sodium; making more fuel than it uses means breeding. It is a fast breeder reactor.

Worked example 2: odd one out

Which is the odd one out: graphite, heavy water, cadmium, light water? Working: graphite, heavy water and light water all slow neutrons (moderators). Cadmium absorbs neutrons and is a control-rod material. Odd one out: cadmium.

Fissile: U-235, Pu-239, U-233. Fertile: U-238 (→ Pu-239), Th-232 (→ U-233). Moderators slow; boron and cadmium absorb; sodium cools fast reactors.

Common traps

  • Heavy water is a moderator and coolant, not a fuel, and it is not radioactive.
  • Light water is a moderator too - it simply absorbs more neutrons than heavy water.
  • Thorium is fertile, not fissile; a thorium reactor needs a fissile 'starter' such as uranium-233 or plutonium.
  • 'Breeder' does not mean the reactor creates energy from nothing; it converts fertile material into fissile fuel.

Key takeaways: revise from the two master tables. Ask three questions of any reactor - what slows the neutrons, what carries the heat, what fuel - and the type follows. Keep fissile and fertile apart.

Check your understanding

  1. 1. Which of the following is a fertile material rather than a fissile one?

    1. Uranium-235
    2. Plutonium-239
    3. Thorium-232
    4. Uranium-233
    Show answer

    Answer: C. Thorium-232 cannot sustain a chain reaction itself but becomes fissile uranium-233 after absorbing a neutron. The other three are fissile.

  2. 2. Match the reactor part with its material: (a) moderator (b) control rod (c) coolant in a fast breeder. Options: (1) liquid sodium (2) boron (3) graphite

    1. a-3, b-2, c-1
    2. a-2, b-3, c-1
    3. a-1, b-2, c-3
    4. a-3, b-1, c-2
    Show answer

    Answer: A. Graphite moderates, boron absorbs neutrons in control rods, and liquid sodium cools fast breeders.

  3. 3. The reactor at Chernobyl that exploded in 1986 was of which type?

    1. Pressurised heavy water reactor
    2. Graphite-moderated, water-cooled reactor (RBMK)
    3. Fast breeder reactor cooled by sodium
    4. Boiling water reactor moderated by heavy water
    Show answer

    Answer: B. Chernobyl unit 4 was an RBMK, a Soviet design moderated by graphite and cooled by ordinary water.

  4. 4. Uranium-238 becomes which fissile isotope after absorbing a neutron and undergoing two beta decays?

    1. Uranium-235
    2. Thorium-232
    3. Uranium-233
    4. Plutonium-239
    Show answer

    Answer: D. Uranium-238 + neutron → uranium-239, which beta-decays to neptunium-239 and then to plutonium-239 (Z 92 → 93 → 94, A stays 239).

  5. 5. Which statement about heavy water is correct?

    1. It is radioactive and is used as reactor fuel
    2. It contains deuterium and serves as moderator and coolant in PHWRs
    3. It is used in control rods to absorb neutrons
    4. It is the coolant in fast breeder reactors
    Show answer

    Answer: B. Heavy water (D₂O) is not radioactive and is not a fuel. It absorbs few neutrons, so PHWRs use it as both moderator and coolant. Fast breeders use sodium; control rods use boron or cadmium.

Privacy · Terms · Refunds · Delivery