• Practice
  • About 14 min
  • 5 practice questions

Pace and time: how many answers fit in the time you have

Measure your writing speed, turn it into a time per answer, and share the time in proportion to marks so that no answer is left half written.

If something looks wrong, please tell us.

A good answer that is never finished earns nothing for the part you did not write. In written papers, running out of time is one of the most common ways to lose marks. The cure is arithmetic: know your writing speed, know how long one answer takes, and decide in advance how the total time is shared. All the figures below are illustrative; your real paper and your real speed will differ.

Step 1: measure your speed

Set a timer for five minutes and write a clear answer on a topic you know well, at the pace you would use in the exam. Count the words. Divide by 5 to get words per minute. Do this twice and use the lower figure, because exam-hall speed is usually lower than practice speed.

Step 2: time per answer

An answer takes planning time, writing time and a short check. As a rough guide, allow about one to two minutes to plan (nearer two for a long answer), the writing time (words divided by speed) and half a minute to check. Add them to get the time for one answer.

Worked example 1: Chitra builds her time per answer

  1. Step 1: in her practice, Chitra writes 118 words in 5 minutes, which is 118 / 5 = 23.6 words a minute. She rounds down to 20 words a minute to be safe.
  2. Step 2: a 150-word answer needs 150 / 20 = 7.5 minutes of writing.
  3. Step 3: adding 1 minute to plan and 0.5 minutes to check gives 9.0 minutes in all.
  4. Step 4: a 250-word answer needs 250 / 20 = 12.5 minutes of writing and 14.0 minutes in all with 1 minute to plan (15.0 with 2 minutes to plan).
  5. Result: Chitra now knows that a 150-word answer costs her 9 minutes and a 250-word answer 14 to 15 minutes, depending on how long she plans. She can see in advance how many answers fit.

Step 3: share time by marks

Suppose a section asks for answers worth different marks. Time should follow marks, since a mark is a mark whichever question carries it. Divide the total time by the total marks to get minutes per mark, then multiply by each answer's marks.

Worked example 2: Jaspreet shares 90 minutes

Jaspreet's practice paper (invented) has 6 answers of 10 marks each (150 words) and 4 answers of 15 marks each (250 words), in 90 minutes. She keeps 5 minutes at the end to review.

  1. Step 1: total marks = 6 x 10 + 4 x 15 = 120.
  2. Step 2: time for answering = 90 - 5 = 85 minutes, so minutes per mark = 85 / 120 = 0.708.
  3. Step 3: a 10-mark answer gets about 7.1 minutes; a 15-mark answer about 10.6 minutes.
  4. Step 4: check the total: 6 x 7.08 + 4 x 10.62 = 85 minutes.
  5. Result: compared with her measured times, each answer gets less than the full 9 or 14 minutes she needs, so Jaspreet knows she must write shorter answers or faster ones. It is better to learn this in practice than in the exam.

Using the plan in the exam

  • Write the finishing time for each group of answers in the margin of the question paper, if allowed.
  • When the time for an answer is up, move to the next, even if you are mid-point; return at the end if time remains.
  • Do the answers you know best first only if the paper allows any order, and number each clearly.
  • Practise at the planned pace, not the pace you wish you had.

Minutes per mark = time available / total marks. Allot time by marks, and rehearse the plan before the paper.

Key takeaways

  • Measure your speed in a five-minute test, and use the lower of two readings.
  • Time for an answer = planning + words / speed + checking.
  • Share total time by marks, keeping a few minutes to review.
  • A shorter finished answer beats a longer unfinished one.

Check your understanding

  1. 1. A student writes 90 words in 5 minutes. What is the speed?

    1. 15 words a minute
    2. 22 words a minute
    3. 450 words a minute
    4. 18 words a minute
    Show answer

    Answer: D. 90 divided by 5 is 18. Dividing words by minutes gives the speed in words per minute.

  2. 2. At 20 words a minute, how long does a 250-word answer take to write (without planning or checking)?

    1. 10.5 minutes
    2. 12.5 minutes
    3. 15 minutes
    4. 12 minutes
    Show answer

    Answer: B. 250 divided by 20 is 12.5 minutes. Adding planning and checking time makes the full time longer.

  3. 3. In an invented paper of 80 marks with 80 minutes for answering, how many minutes per mark?

    1. 0.5 minute
    2. 2 minutes
    3. 1 minute
    4. 1.5 minutes
    Show answer

    Answer: C. 80 minutes divided by 80 marks is 1 minute per mark. A 10-mark answer then gets 10 minutes.

  4. 4. Why use the lower of two timed readings of your speed?

    1. Speed in the hall is usually lower
    2. The higher reading is always wrong
    3. Extra time is given in the exam
    4. Speed has no link to word count
    Show answer

    Answer: A. Tension and thinking slow most writers in the exam. A plan built on the faster figure may leave answers unfinished.

  5. 5. When the time planned for an answer is over and the answer is unfinished, what is wise?

    1. Keep writing until it is perfect
    2. Cross it out and start it again
    3. Close it briefly, move on, then return
    4. Skip all of the remaining answers
    Show answer

    Answer: C. The next answer may carry as many marks as the one you are on. A brief closing keeps the unfinished answer from being wasted, and you can come back at the end.

Privacy · Terms · Refunds · Delivery