• Practice
  • About 15 min
  • 5 practice questions

Topic-wise accuracy tables and trends across several mocks

Combine topic results from several mocks into one accuracy table, read it in four groups, and judge whether your score is really improving using averages over mocks.

If something looks wrong, please tell us.

One mock gives only a handful of questions per topic, too few to judge. Three or four mocks together give a much clearer picture. This lesson shows how to build a topic-wise table across mocks and how to read your overall trend without being fooled by one lucky or unlucky paper.

Building the table

For each topic, add up attempts and correct answers across your last few mocks, then work out accuracy = correct ÷ attempts × 100. Use the error log and the answer key; it takes about 15 minutes once you have the numbers. As a rule of thumb, treat a topic with fewer than about 8 attempts in total as 'not enough to judge yet'.

Worked example 1: Suresh's three mocks

Suresh's topic table (10 ÷ 17 ≈ 58.8%; 14 ÷ 23 ≈ 60.9%)
TopicAttempts (M1+M2+M3)Correct (M1+M2+M3)Accuracy
Percentages4 + 5 + 3 = 123 + 4 + 2 = 975%
Data interpretation6 + 5 + 6 = 173 + 3 + 4 = 10about 59%
Syllogisms3 + 4 + 3 = 103 + 4 + 3 = 10100%
Reading comprehension8 + 7 + 8 = 235 + 4 + 5 = 14about 61%
Geometry1 + 0 + 1 = 21 + 0 + 1 = 2too few to judge

Reading the table in four groups

Four groups
GroupPatternMeaningAction
StrengthMany attempts, high accuracyReliable marksKeep in practice; do not over-study
DangerMany attempts, low accuracyYou attempt a lot and lose marksStudy the method; be more selective meanwhile
HiddenFew attempts, high accuracyYou may be under-attemptingTry more of these in the next mock
GapFew attempts, low accuracyNot yet learntSchedule as new study

For Suresh, syllogisms are a strength. Data interpretation (17 attempts, about 59%) and reading comprehension (23 attempts, about 61%) are danger topics: he attempts many and loses marks on them, so they come first in his plan. Geometry has only 2 attempts, both right, so it might be a hidden strength or might just be luck; he decides to attempt a few more geometry questions in mock 4 to find out.

Is the score really improving?

Mock papers vary in difficulty, so one high or low score can mislead. Look at a rolling average: the average of the last three mocks, recalculated after each new one.

Worked example 2: Asha's five mocks

Asha's net scores in five mocks from the same series are 98, 104, 101, 112 and 109. Her rolling averages of three are: (98 + 104 + 101) ÷ 3 = 101; (104 + 101 + 112) ÷ 3 = 317 ÷ 3 ≈ 105.7; (101 + 112 + 109) ÷ 3 = 322 ÷ 3 ≈ 107.3. Although mock 5 was lower than mock 4, the rolling average rose each time, so the trend is upward. She also checks her accuracy across the five mocks, which rose slowly; that supports the trend being real rather than a run of easier papers. Comparing mocks from the same series helps, because difficulty is more consistent within one source.

Judge topics on several mocks together, not one. Judge your progress on a rolling average, not on the latest score.

Key takeaways

  • Add attempts and correct answers across mocks before calculating topic accuracy.
  • Fewer than about 8 attempts on a topic is too little to judge.
  • Danger topics (many attempts, low accuracy) usually come first.
  • Use a rolling average of three mocks to see your real trend.

Check your understanding

  1. 1. Across three mocks a student attempted 6, 5 and 9 questions on a topic and got 4, 4 and 7 right. What is the combined accuracy?

    1. 70%
    2. 75%
    3. 80%
    4. 65%
    Show answer

    Answer: B. Attempts = 6 + 5 + 9 = 20. Correct = 4 + 4 + 7 = 15. Accuracy = 15 ÷ 20 × 100 = 75%.

  2. 2. A topic has many attempts and low accuracy. Which group is it in?

    1. Danger
    2. Strength
    3. Hidden
    4. Gap
    Show answer

    Answer: A. Many attempts with low accuracy means the topic regularly costs marks, which is the danger group.

  3. 3. A topic has 3 attempts in three mocks, all correct. What is the most sensible reading?

    1. It is a proven strength
    2. Too few attempts to judge; try a few more next time
    3. It should be dropped from study
    4. It is a danger topic
    Show answer

    Answer: B. Three attempts are far below the rough minimum of about 8, so the 100% may be luck. Attempting a few more will show which it is.

  4. 4. Net scores in four mocks are 90, 96, 93 and 102. What is the rolling average of the last three?

    1. 95.25
    2. 93
    3. 102
    4. 97
    Show answer

    Answer: D. (96 + 93 + 102) ÷ 3 = 291 ÷ 3 = 97.

  5. 5. Why is a rolling average better than the latest score for judging progress?

    1. Because the latest score is always lower than the earlier ones in a mock series
    2. Because averages are always higher than single scores
    3. Single papers vary in difficulty; an average smooths out one-off highs and lows
    4. Because mock providers recommend it
    Show answer

    Answer: C. Difficulty varies between papers, so one score can mislead. An average of several mocks shows the underlying trend.

Privacy · Terms · Refunds · Delivery