• Foundation
  • About 13 min
  • 5 practice questions

Measuring your baseline: questions per minute and accuracy percentage

Work out your questions per minute, seconds per question, accuracy and correct answers per minute from a practice set, and record them as a starting point.

If something looks wrong, please tell us.

You cannot tell whether you are getting faster unless you know how fast you are now. A baseline is that starting measurement. It takes one honest practice set and a few minutes of arithmetic, and it turns a vague feeling ("I am slow in maths") into numbers you can improve and check.

The four numbers to record

Baseline measures
MeasureFormulaWhat it tells you
Questions per minuteQuestions attempted / minutes usedYour raw pace
Seconds per questionSeconds used / questions attemptedThe same pace, easier to compare with a target
Accuracy %Correct / attempted x 100How reliable your answers are
Correct per minuteCorrect / minutes usedSpeed and accuracy in one number

The last measure is the most useful single number. If you speed up but lose accuracy, correct per minute may not rise at all; if it rises, you are genuinely improving.

How to take a fair baseline

  1. Choose one question type (for example simplification, or seating arrangement) and a set of 20 to 30 questions you have not seen.
  2. Work at your normal pace, not a rushed one. Note the start and finish time.
  3. Do not look anything up during the set, and do not pause the clock.
  4. Mark it honestly. A guess that happens to be right still counts as right, but put a small mark next to it so you know it was a guess.
  5. Repeat on two more days and add the totals, so one good or bad day does not mislead you.

Worked example 1: Meena, a B.Com student

Meena has 3 free hours on weekday evenings. She takes 30 minutes for a set of 25 arithmetic questions, attempts all 25 and gets 19 right.

  • Questions per minute = 25 / 30 = 0.83 (rounded).
  • Seconds per question = (30 x 60) / 25 = 1,800 / 25 = 72 seconds.
  • Accuracy = 19 / 25 x 100 = 76%.
  • Correct per minute = 19 / 30 = 0.63 (rounded).

Worked example 2: Faizan runs out of time

Faizan, who prepares after his shift at a mobile shop, gives himself 20 minutes for 30 reasoning questions. When the time is up he has attempted 24 and got 21 right. The 6 he did not reach are simply not counted in accuracy; they show up in his pace instead.

  • Questions per minute = 24 / 20 = 1.2.
  • Seconds per question = (20 x 60) / 24 = 1,200 / 24 = 50 seconds.
  • Accuracy = 21 / 24 x 100 = 87.5%.
  • Correct per minute = 21 / 20 = 1.05.

Faizan's accuracy is good, so his next step is speed. Meena's accuracy of 76% says she should first look at why 6 answers went wrong before pushing the clock.

Combining several sets

When you have three sets, add the totals instead of averaging the percentages. If Meena's three sets give 19 of 25, 20 of 25 and 18 of 25 correct, her combined accuracy is (19 + 20 + 18) / 75 = 57 / 75 = 76%. Adding totals gives each question equal weight, which matters when sets are of different sizes.

A baseline log you can copy into a notebook
DateQuestion typeAttemptedCorrectMinutesSec / questionAccuracy %Correct / min
Day 1 (example)Arithmetic25193072760.63
Day 2

Measure before you change anything: attempts, correct answers and minutes. Every later improvement is judged against this baseline.

Key takeaways

  • Record attempted, correct and minutes; the four measures follow from these.
  • Seconds per question is easiest to compare with a target pace.
  • Correct per minute combines speed and accuracy in one number.
  • Take the baseline over a few sets and add the totals.

Check your understanding

  1. 1. A student uses 15 minutes and attempts 20 questions. What is the time per question?

    1. 40 seconds
    2. 50 seconds
    3. 75 seconds
    4. 45 seconds
    Show answer

    Answer: D. 15 minutes = 900 seconds; 900 / 20 = 45 seconds per question.

  2. 2. Which single measure shows speed and accuracy together?

    1. Questions attempted per minute
    2. Total minutes used
    3. Number of questions left unattempted
    4. Correct answers per minute
    Show answer

    Answer: D. Correct per minute rises only if you get more right answers in the same time, so it captures both speed and accuracy.

  3. 3. In 25 minutes Pradeep attempts 30 questions and gets 24 right. What is his accuracy?

    1. 96%
    2. 75%
    3. 80%
    4. 83%
    Show answer

    Answer: C. Accuracy = correct / attempted x 100 = 24 / 30 x 100 = 80%. (96% would wrongly divide by the 25 minutes.)

  4. 4. Three baseline sets give 18 of 20, 14 of 20 and 23 of 25 correct. What is the combined accuracy?

    1. 86.7%
    2. 83.3%
    3. 90%
    4. 84.6% (55 of 65)
    Show answer

    Answer: D. Add totals: correct = 18 + 14 + 23 = 55; attempted = 20 + 20 + 25 = 65; 55 / 65 = 0.846, so 84.6%.

  5. 5. Why should you take your baseline at your normal pace rather than rushing?

    1. So the numbers describe your real starting point
    2. Because rushing is never allowed in practice
    3. So that the accuracy comes out at 100%
    4. Because a baseline is only about speed
    Show answer

    Answer: A. A baseline is a fair picture of where you are now. A rushed set would give misleading numbers to compare against later.

Privacy · Terms · Refunds · Delivery