• Foundation
  • About 13 min
  • 5 practice questions

Timed practice sets: working against the clock for the first time

Set a sensible time limit from your baseline, run a timed set without pausing, and decide from the result whether to tighten the limit or hold it.

If something looks wrong, please tell us.

Once your accuracy on a question type is steady, the clock becomes useful. A timed set teaches you to keep moving, shows you which questions eat your time, and gets you used to working with a deadline. The aim at this stage is not to race; it is to practise at a pace slightly faster than your comfortable one while keeping accuracy.

Setting the first time limit

  1. Start from your baseline seconds per question for that question type.
  2. Take about 10% off and round to a convenient figure. This is a small stretch, not a leap.
  3. Multiply by the number of questions in the set to get the time limit.
  4. Keep sets short, 10 to 20 questions, so you can do one even on a busy day.

Worked example 1: Rohit sets his limit

Rohit's baseline for simplification questions is 72 seconds per question with 85% accuracy. He plans a set of 15 questions.

  • At baseline pace the set would take 15 x 72 = 1,080 seconds = 18 minutes.
  • 10% less than 72 seconds is 72 x 0.9 = 64.8 seconds; he rounds down to 64 seconds.
  • New limit = 15 x 64 = 960 seconds = 16 minutes.

Running the set

  1. Use a plain clock or a timer. Write the start time at the top of the sheet.
  2. Do not pause the clock for any reason. If you are interrupted, note it and treat the set as a practice run.
  3. If a question is taking far longer than the others, mark it and move on; come back if time is left.
  4. Stop when the time is up, even in the middle of a question. Draw a line under the last one you finished.
  5. Mark the set only after the clock stops, then record attempted, correct and minutes in your log.

Deciding the next limit

Choose an accuracy level you want to protect, for example 80%. If a timed set stays at or above it, you may tighten the limit a little next time. If accuracy falls below it, go back to the previous limit. This simple rule stops you from buying speed with wrong answers.

Worked example 2: Anjali's week of timed sets

Anjali, preparing from her small room in Patna, does 15-question sets on alternate days and protects 80% accuracy.

One week of timed practice
DayTime limitAttemptedCorrectAccuracyDecision
Monday18 min151313 / 15 = 86.7%Above 80%: tighten to 16 min
Wednesday16 min151212 / 15 = 80%At 80%: hold 16 min
Friday16 min141313 / 14 = 92.9%Above 80%: try 15 min
Saturday15 min1399 / 13 = 69.2%Below 80%: back to 16 min

On Saturday Anjali attempted fewer questions and got more wrong, a clear sign that 15 minutes is too tight for now. She returns to 16 minutes and will try again after a few steady sets. Her best set, Friday, gave 13 correct in 16 minutes, or 13 / 16 = 0.81 correct per minute.

Tighten the clock only when accuracy holds. When it drops, step back to the last limit that worked.

Common mistakes with timed sets

  • Timing a question type you have not yet learnt properly.
  • Pausing the clock to look up a formula, which makes the timing meaningless.
  • Cutting the time by large jumps instead of small steps.
  • Recording only the score and not the minutes, so progress cannot be measured.

Key takeaways

  • Begin about 10% faster than your baseline pace, rounded to a convenient figure.
  • Never pause the clock; stop exactly when time is up.
  • Protect an accuracy level and tighten only while it holds.
  • Short sets done often beat one long set done rarely.

Check your understanding

  1. 1. Your baseline is 80 seconds per question. Taking about 10% off, what is a sensible first target?

    1. 40 seconds per question
    2. 60 seconds per question
    3. 88 seconds per question
    4. 72 seconds per question
    Show answer

    Answer: D. 80 x 0.9 = 72 seconds. 40 and 60 are big jumps; 88 is slower than the baseline.

  2. 2. A set has 12 questions and a target of 75 seconds per question. What is the time limit?

    1. 12 minutes
    2. 15 minutes
    3. 18 minutes
    4. 9 minutes
    Show answer

    Answer: B. 12 x 75 = 900 seconds = 15 minutes.

  3. 3. Halfway through a timed set your phone rings and you talk for four minutes with the clock running. What should you do with that set?

    1. Note the interruption and treat it as a practice run, not a measurement
    2. Record it as your new baseline
    3. Subtract the four minutes and record it normally
    4. Tighten the next limit because you finished
    Show answer

    Answer: A. An interrupted set does not measure your pace, so it should not be used to judge progress.

  4. 4. You protect 80% accuracy. A set at 14 minutes gives 10 correct out of 14 attempted. What next?

    1. Tighten to 13 minutes
    2. Go back to the previous, longer limit
    3. Keep 14 minutes and ignore accuracy
    4. Stop timing practice altogether
    Show answer

    Answer: B. 10 / 14 = 71.4%, below 80%, so the limit is too tight for now. Return to the last limit where accuracy held.

  5. 5. When should you mark a timed set?

    1. After every question, with the clock running
    2. After the clock stops
    3. Before you start
    4. Only at the end of the week
    Show answer

    Answer: B. Marking during the set uses up time and changes the measurement; mark once the time is over, then log the numbers.

Privacy · Terms · Refunds · Delivery