• Foundation
  • About 13 min
  • 5 practice questions

Clock checkpoints and using the last minutes of a paper

Set two to four clock checkpoints with question targets, adjust calmly when you are behind, and use the last minutes for checks rather than new long questions.

If something looks wrong, please tell us.

A budget is only useful if you compare yourself with it during the paper. Looking at the clock after every question wastes time and raises anxiety; never looking at it means discovering the problem when it is too late. Checkpoints are the middle path: a few planned moments when you glance at the clock and your question number, and decide whether anything needs to change.

Setting checkpoints

  • Choose two to four checkpoints for the answering time. More than that becomes clock-watching.
  • For each, write a clock time and a target question number, from your budget.
  • In a two-round approach, the target means "reached question number X", counting skipped questions as passed.
  • Use whatever timer the hall allows: a wall clock, a permitted watch, or the on-screen timer in a computer-based test.

Worked example 1: Anjali's checkpoint card

Anjali, an M.Sc. student in Kochi, practises an illustrative 2-hour paper with 120 questions, starting at 10:00. She keeps 5 minutes at the start and 15 at the end for Round 2 and checks.

  1. Answering time for Round 1: 120 − 5 − 15 = 100 minutes = 6000 seconds.
  2. Budget: 6000 ÷ 120 = 50 seconds per question.
  3. Checkpoint spacing: every 25 minutes. 25 minutes = 1500 seconds, and 1500 ÷ 50 = 30 questions.
Anjali's checkpoints: each step is 25 minutes, and 11:45 + 15 minutes = 12:00
Clock timeTarget
10:05Start answering
10:30Reached question 30
10:55Reached question 60
11:20Reached question 90
11:45Reached question 120
11:45-12:00Return to marked questions, then checks

When you are behind or ahead

Being behind at a checkpoint is normal and fixable early. The fix is not to read faster and skip words; that causes careless errors. Instead, tighten your skip rule for the next stretch: pass over anything needing more than one step and leave it for the return round. Being ahead is also information: do not relax; bank the time for Round 2.

Worked example 2: Vikas catches up

Vikas, a B.Com graduate working in a bank branch's back office in Nagpur, takes an illustrative 60-minute, 100-question mock with no reserve, to keep the numbers simple. His budget is 36 seconds, so each 15 minutes should cover 900 ÷ 36 = 25 questions: checkpoints at 15, 30 and 45 minutes, with targets 25, 50 and 75.

  1. At the 30-minute checkpoint he is at question 40, not 50. He is 10 questions behind.
  2. What is left: 30 minutes = 1800 seconds for 100 − 40 = 60 questions.
  3. New pace needed: 1800 ÷ 60 = 30 seconds a question.
  4. His response: he keeps reading carefully but skips every question that needs a long calculation, marking it.
  5. At 45 minutes he has reached question 70, so the gap has shrunk from 10 to 5 (target 75). Keeping the 30-second pace (30 questions in 15 minutes), he reaches question 100 just as time ends. Because this mock had no reserve, his marked questions stay unanswered, which is why his next plan keeps a reserve for a return round.

Using the last minutes

The last part of the paper has a different job from the rest. It is for making sure that the marks you have earned are recorded and safe, not for starting the longest question in the paper.

One way to use the last 10 minutes
Minutes left (example)What to do
10 to 7Finish the question in hand; do not start any new long question
7 to 4Check every answer is recorded in the right place: bubbles in the right rows, or answers saved on screen
4 to 2Look again at questions marked for review
2 to 0Make final decisions on the unanswered ones by your own rule; do not change answers on a hunch

Check the clock at planned points, not every minute and not never. Keep the last minutes for protecting marks, not chasing new ones.

Key takeaways

  • Two to four checkpoints, each with a clock time and a question target.
  • Work out checkpoint spacing from your budget: minutes × 60 ÷ seconds per question.
  • When behind, tighten the skip rule; do not rush the reading.
  • When ahead, bank the time for the return round.
  • Use the last minutes to check that answers are recorded correctly, not to start long questions.

Check your understanding

  1. 1. What is the purpose of a clock checkpoint?

    1. To check the time after every question
    2. To compare progress with the plan early enough to adjust
    3. To decide whether to leave the hall early
    4. To count how many others have finished
    Show answer

    Answer: B. Checkpoints are a few planned comparisons with the plan, so problems are spotted while there is time to fix them.

  2. 2. Your Round 1 answering time is 80 minutes for 96 questions, and you set checkpoints every 20 minutes. How many questions should each checkpoint add?

    1. 24
    2. 20
    3. 25
    4. 30
    Show answer

    Answer: A. 80 minutes = 4800 seconds, and 4800 ÷ 96 = 50 seconds per question. 20 minutes = 1200 seconds, and 1200 ÷ 50 = 24 questions.

  3. 3. In a 60-minute, 100-question paper with no reserve, you reach question 50 at the 40-minute mark. What pace do you now need to reach the end?

    1. 30 seconds a question
    2. 20 seconds a question
    3. 24 seconds a question
    4. 36 seconds a question
    Show answer

    Answer: C. 20 minutes = 1200 seconds remain for 50 questions, and 1200 ÷ 50 = 24 seconds.

  4. 4. You are 10 questions behind at a checkpoint. What is the best response?

    1. Read faster by skipping words in each question
    2. Keep reading carefully but skip more of the long questions until you catch up
    3. Stop looking at the clock so you do not panic
    4. Leave the rest of the paper blank and check what you have done
    Show answer

    Answer: B. Rushed reading causes errors. Tightening the skip rule recovers pace without losing accuracy.

  5. 5. Which is the best use of the last few minutes?

    1. Starting the longest unattempted question
    2. Checking that every answer is recorded in the right place
    3. Changing several answers on a gut feeling
    4. Re-reading the instructions page from the beginning
    Show answer

    Answer: B. The last minutes protect the marks already earned. A long new question rarely finishes, and hunch-based changes add risk.

Privacy · Terms · Refunds · Delivery