• Foundation
  • About 12 min
  • 5 practice questions

The first minutes: reading instructions and scanning the paper

Use the first two or three minutes to read the instructions that affect time, look over the whole paper, and write a small plan with checkpoint times before you answer anything.

If something looks wrong, please tell us.

The first minutes feel like the worst time to slow down: everyone around you seems to be writing already. Yet a short, calm start is what makes the rest of the paper fast. Two or three minutes spent understanding the rules and the shape of the paper can save far more later, and they settle the nerves.

The hall's rules come first

Every exam has its own rules about when you may open the paper, whether you may write on the question booklet, and how rough work is done. Follow the printed instructions and the invigilator. Nothing in this course overrides them; if a tip here does not fit your hall's rules, drop the tip.

What to look for in the instructions

  • Marks per question: are all questions worth the same, or does one part carry more?
  • Wrong answers: do they lose marks? (How to decide on guessing is covered in another course; here it only matters that you know.)
  • Section time limits: does each section have its own clock, or can you move freely?
  • How answers are recorded: bubbles on a sheet, a pen colour, clicks on a screen.
  • Rough work: where it is allowed.

Scanning the paper

A scan is a look, not a start. In a minute or two, turn through the paper (or the section list on screen) and note: how many sections and questions there are, which parts look easy for you, and where the long items sit, such as reading passages, puzzles or data tables. Do not solve anything in detail while scanning, or the scan becomes a slow start in disguise.

A first-minutes checklist
StepTimeWhat you note
Read the instructionsAbout 1 minuteMarks per part, wrong-answer rule, section limits, how to record
Scan the paper1 to 2 minutesSections, easy areas, long items
Write a mini planAbout 30 secondsOrder to attempt, two or three checkpoint times

Worked example 1: Imran writes his plan

Imran, an engineering graduate in Hyderabad, practises an illustrative 2-hour paper with 120 equal-mark questions. He decides on 3 minutes at the start and 9 minutes at the end.

  1. Answering time: 120 − 3 − 9 = 108 minutes = 6480 seconds.
  2. Budget: 6480 ÷ 120 = 54 seconds per question.
  3. Checkpoints every 40 questions: 40 × 54 = 2160 seconds = 36 minutes.
  4. His written plan: start answering at 0:03; question 40 by 0:39 (3 + 36); question 80 by 1:15 (39 + 36 = 75 minutes); question 120 by 1:51 (75 + 36 = 111 minutes); checks from 1:51 to 2:00.
  5. Check: 111 + 9 = 120 minutes, the full paper.

It took him about 30 seconds to write those four times on his rough sheet, and they guided him through the next two hours.

Worked example 2: Pooja and the double-mark part

Pooja, a B.Ed. student in Bhopal, practises an illustrative 90-minute paper: Part A has 80 questions of 1 mark, Part B has 40 questions of 2 marks. In an earlier mock she skipped the instructions and gave every question the same time: with a 10-minute reserve, 80 minutes = 4800 seconds, and 4800 ÷ 120 = 40 seconds each. She rushed the two-mark questions and finished Part A with time to spare.

This time she reads the instructions and budgets per mark:

  1. Total marks: 80 × 1 + 40 × 2 = 80 + 80 = 160.
  2. Seconds per mark: 4800 ÷ 160 = 30.
  3. Part A: 30 seconds a question; 80 × 30 = 2400 seconds = 40 minutes.
  4. Part B: 60 seconds a question; 40 × 60 = 2400 seconds = 40 minutes.
  5. Check: 40 + 40 = 80 minutes, plus the 10-minute reserve = 90.

The only difference between the two mocks was one minute spent reading.

Read the rules, look at the whole paper, write your plan, then start. Two or three minutes here save many later.

Key takeaways

  • The hall's printed rules and the invigilator always come first.
  • From the instructions, note marks per part, the wrong-answer rule, section limits and how answers are recorded.
  • Scan for shape: sections, easy areas, long items. Do not solve while scanning.
  • Write a mini plan with two or three checkpoint times.
  • When parts carry different marks, budget per mark rather than per question.

Check your understanding

  1. 1. Which of these should you look for in the instructions before starting?

    1. Whether marks differ between parts and whether wrong answers lose marks
    2. How many other candidates are in the room
    3. Which topics came in last year's paper
    4. The answers to the first few questions
    Show answer

    Answer: A. Marks per part and the wrong-answer rule change how you should spend time. The others are either unavailable or irrelevant.

  2. 2. An illustrative 60-minute paper has 100 questions. You keep 2 minutes at the start and 8 at the end. What is your budget per question?

    1. 30 seconds
    2. 36 seconds
    3. 32 seconds
    4. 25 seconds
    Show answer

    Answer: A. 60 − 2 − 8 = 50 minutes = 3000 seconds, and 3000 ÷ 100 = 30 seconds.

  3. 3. A 60-minute paper with a 6-minute reserve has 60 one-mark and 30 two-mark questions. Budgeting per mark, how long should a two-mark question get?

    1. 27 seconds
    2. 54 seconds
    3. 36 seconds
    4. 45 seconds
    Show answer

    Answer: B. 54 minutes = 3240 seconds. Total marks = 60 + 60 = 120, so 3240 ÷ 120 = 27 seconds per mark; a two-mark question gets 54 seconds.

  4. 4. Which is a mistake during the first-minutes scan?

    1. Noting where the long reading passages are
    2. Noting which sections look easy for you
    3. Writing two or three checkpoint times
    4. Solving the first section in detail before seeing the rest
    Show answer

    Answer: D. The scan is a quick look at the whole paper. Solving in detail turns it into a slow start.

  5. 5. A tip says to write your plan on the question booklet, but the invigilator says nothing may be written on it. What should you do?

    1. Follow the invigilator and keep the plan in your head or where rough work is allowed
    2. Write the plan anyway because it saves time
    3. Ask other candidates what they are doing
    4. Skip planning for the whole paper
    Show answer

    Answer: A. The hall's rules always come first. The plan can be kept in mind or written wherever rough work is permitted.

Privacy · Terms · Refunds · Delivery