• Practice
  • About 14 min
  • 5 practice questions

Calculation-heavy sets: ordering questions and sets by cost and value

Rank the questions within a data set, and the sets within a section, by marks per minute, and do the cheap ones first so that heavy calculations are attempted only with time to spare.

If something looks wrong, please tell us.

Data tables, charts and number puzzles share a feature: a set-up that costs time, followed by questions that range from a quick look-up to a long calculation. If you take them in the order printed you may spend four minutes on the last question and lose three easy marks elsewhere. The remedy is to treat the questions as having prices, and to buy the cheapest marks first. All numbers below are illustrations, with one mark per question and no wrong-answer penalty.

Marks per minute

For any group, marks per minute = marks / (time in seconds / 60). A group that gives 3 marks for 205 seconds earns 3 / (205 / 60) = 0.88 marks per minute. A group that gives 2 marks for 240 seconds earns only 2 / 4 = 0.5. When time is short, the higher rate goes first.

Worked example 1: the questions inside one set

A table carries five questions. The set-up (reading the title, units and headings) costs 90 seconds. Three of the questions need a quick look-up or one percentage and take 30, 40 and 45 seconds. Two need long calculations and take 110 and 130 seconds. The budget for the set, at 60 seconds a question, is 5 x 60 = 300 seconds.

ChoiceTimeMarksMarks per minute
Set-up + three quick questions90 + 30 + 40 + 45 = 205 s30.88
The two heavy questions110 + 130 = 240 s20.50
Everything205 + 240 = 445 s50.67

The quick three alone fit the budget with 300 - 205 = 95 seconds to spare. Attempting all five costs 445 seconds, which is 145 seconds over. So she does the three quick questions at once, marks the heavy two, and returns to them only if time remains (and in the second round she looks for approximation first, because options in data questions are often far apart).

Worked example 2: choosing among sets

A section has four sets. Each set's time is the set-up plus the question times: A is 60 + 5 x 30 = 210 seconds for 5 marks; B is 150 + 5 x 50 = 400 seconds for 5 marks; C is 90 + 4 x 40 = 250 seconds for 4 marks; D is 200 + 5 x 60 = 500 seconds for 5 marks.

SetTimeMarksMarks per minute
A210 s51.43
B400 s50.75
C250 s40.96
D500 s50.60

Only 12 minutes (720 seconds) remain. By rate, the order is A, C, B, D. A and C together take 210 + 250 = 460 seconds and give 9 marks, leaving 720 - 460 = 260 seconds. Set B is too long to finish (400 seconds), but its set-up and two questions cost 150 + 2 x 50 = 250 seconds, which fits for 2 more marks. Total: 460 + 250 = 710 seconds for 9 + 2 = 11 marks. Set D is left entirely.

Price every group: marks per minute. Buy the cheap marks first and the expensive ones only with time to spare.

Speeding up the heavy ones

  • Round to friendly numbers when the options are far apart.
  • Use the fraction-percent pairs you know (1/8 = 12.5%) instead of long division.
  • Write each step of a long calculation once, neatly, so that you do not need to redo it.

Key takeaways

  • Marks per minute = marks / (seconds / 60).
  • Within a set, take look-up and one-step questions first.
  • Across sets, rank by rate when time is short.
  • Heavy calculations come last, and approximation first.

Check your understanding

  1. 1. A group gives 3 marks for 180 seconds. What is its rate in marks per minute?

    1. 0.6
    2. 1.5
    3. 1
    4. 3
    Show answer

    Answer: C. 3 / (180 / 60) = 3 / 3 = 1 mark per minute.

  2. 2. Set X gives 4 marks in 240 seconds and set Y gives 5 marks in 450 seconds. Which has the higher rate?

    1. Set X, with 1 mark per minute against 0.67
    2. Set Y, with 1.5 marks per minute
    3. They are equal
    4. Set Y, with 1 mark per minute against 0.67
    Show answer

    Answer: A. X: 4 / 4 = 1. Y: 5 / 7.5 = 0.67. X has the higher rate.

  3. 3. Which questions should be done first within a data set?

    1. The longest calculation that is in the set
    2. The last question printed on the page
    3. Those questions with the biggest numbers in them
    4. The quick look-up and one-step questions
    Show answer

    Answer: D. Cheap marks come first, and the long calculations wait until the rest of the paper has been seen.

  4. 4. With 720 seconds left, sets A (210 s) and C (250 s) are done. How many seconds remain?

    1. 460
    2. 260
    3. 300
    4. 210
    Show answer

    Answer: B. 210 + 250 = 460 and 720 - 460 = 260 seconds.

  5. 5. Why is the rate of a set affected by its set-up time?

    1. The set-up is paid once but earns no marks itself
    2. The set-up always takes exactly one minute
    3. The set-up is free and costs no time at all
    4. The set-up changes the marks of each question
    Show answer

    Answer: A. A long set-up spreads over the questions of the set, so a set with the same questions but a longer set-up has a lower rate.

Privacy · Terms · Refunds · Delivery