• Practice
  • About 14 min
  • 5 practice questions

Passage-based questions: time for reading, answering and choosing the order

Split a section of passages into reading time and question time, choose an order that starts with short familiar passages, and answer each passage's questions from quick to slow.

If something looks wrong, please tell us.

In a passage-based section, one block of text carries a group of questions. The reading time is shared by all of them, but it is also the biggest single cost, and it can swallow the whole section if you let it. This lesson gives a way to budget a passage, to choose which passage to read first, and to answer its questions in a sensible order. The section below is an illustration; check the instructions on your own paper for the real sizes and rules.

Budgeting a passage

Take an illustrative section of 4 passages with 5 questions each (20 questions) in 24 minutes. Each passage then gets 24 / 4 = 6 minutes, which is 360 seconds. A reasonable split is about 2 minutes (120 seconds) to read and 4 minutes (240 seconds) for the questions, which is 240 / 5 = 48 seconds a question. Check: 120 + 240 = 360.

A passage budget
PartTimeNotes
Skim or read the passageAbout 2 minutesPurposeful reading: openings of paragraphs, then the questions
Easy questions (vocabulary, direct look-up)About 25 to 40 seconds eachAnswer from the text and move on
Harder questions (inference, tone, main idea)About 70 to 80 seconds eachGo back to the passage with the question in mind

Choosing the order of passages

  • Begin with a short passage on a familiar subject; it gives marks and confidence quickly.
  • Leave a long, dense or unfamiliar passage until last, when you know how much time remains.
  • Decide the order in the first minute by glancing at the length and the opening lines of each passage.
  • If sectional time limits do not allow free order, apply the same ideas inside each passage.

Worked example 1: Meena orders four passages

Meena reads at about 200 words a minute for a careful first reading. Her four passages have 250, 400, 300 and 600 words, so a full reading would take 1.25, 2, 1.5 and 3 minutes. She puts them in order of length: 250, 300, 400, 600. For each she budgets the reading time above plus 5 questions at 48 seconds, which is 4 minutes.

  • First three passages: reading 1.25 + 1.5 + 2 = 4.75 minutes; questions 3 x 5 x 48 = 720 seconds = 12 minutes. Total 4.75 + 12 = 16.75 minutes.
  • Left for the last passage: 24 - 16.75 = 7.25 minutes.
  • Last passage needs: 3 minutes reading + 5 x 48 seconds = 4 minutes = 7 minutes. It fits, with 0.25 minute (15 seconds) to spare.

Because the margin is thin, she sets a rule: if she is more than 1 minute behind plan after the third passage, she skims the last passage's opening and closing lines only, and reads for the questions.

Worked example 2: ordering the questions within a passage

For one passage Meena's questions are two vocabulary-in-context items, one detail question and two inference questions. She answers them in that order. Time: 2 x 25 + 40 + 2 x 75 = 50 + 40 + 150 = 240 seconds, or 4 minutes, which is exactly the passage's question budget. Had she done the inference questions first, she might have spent 100 seconds each before she had even found the detail in the text, and the easy marks would have been squeezed. The easy questions also help her to build a picture of the passage before the harder ones.

Budget reading and questions separately, start with a short familiar passage, and answer each passage's questions from quick to slow.

Traps

  • Reading the whole passage word by word when a purposeful skim would do.
  • Rereading the passage from the beginning for every question; go to the right paragraph.
  • Spending a long time on one inference question and starving the rest of the passage.

Key takeaways

  • Time per passage = section time / number of passages, split into reading and questions.
  • Order passages by length and familiarity when the paper allows.
  • Answer vocabulary and look-up questions first, inference questions last.
  • Set a rule for what to do if you fall behind.

Check your understanding

  1. 1. A section of 4 passages has 24 minutes. How long is each passage's share?

    1. 4 minutes
    2. 6 minutes
    3. 5 minutes
    4. 8 minutes
    Show answer

    Answer: B. 24 / 4 = 6 minutes per passage.

  2. 2. A passage budget of 360 seconds has 120 seconds for reading. How many seconds are left for 5 questions, per question?

    1. 24
    2. 60
    3. 72
    4. 48
    Show answer

    Answer: D. 360 - 120 = 240 seconds; 240 / 5 = 48 seconds.

  3. 3. A 300-word passage is read at 200 words a minute. How long is the reading?

    1. 90 seconds
    2. 60 seconds
    3. 120 seconds
    4. 180 seconds
    Show answer

    Answer: A. 300 / 200 = 1.5 minutes.

  4. 4. In which order should a passage's questions normally be answered?

    1. Inference ones first, and the look-up ones last
    2. In reverse order of the marks they carry
    3. Vocabulary and look-up first, then inference ones
    4. Only the first question, then skip all the rest
    Show answer

    Answer: C. The quick questions give marks cheaply and help you understand the passage before the slow ones.

  5. 5. Why start with a short, familiar passage?

    1. It is always worth more marks than the others
    2. The paper requires it as a fixed rule
    3. Long passages cannot be done by anyone at all
    4. It gives quick marks and shows how much time is left
    Show answer

    Answer: D. A short familiar passage is a cheap source of marks and, once done, tells you how much time is left for the harder ones.

Privacy · Terms · Refunds · Delivery