• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Thermal Physics

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before checking. Use K = °C + 273, R = 8.31 J mol⁻¹ K⁻¹ and N_A = 6.022 × 10²³ mol⁻¹.

Final self-assessment

  1. 1. A temperature of −40 °C is equal to

    1. 313 K
    2. 233 K
    3. −313 K
    4. 40 K
    Show answer

    Answer: B. K = °C + 273 = −40 + 273 = 233 K.

  2. 2. Using K = (°F + 460) × 5/9, a temperature of 86 °F is about

    1. 243 K
    2. 359 K
    3. 273 K
    4. 303 K
    Show answer

    Answer: D. K = (86 + 460) × 5/9 = 546 × 5/9 ≈ 303 K, which is about 30 °C.

  3. 3. A hot iron ball is dropped into a bucket of cool water. Heat flows

    1. from the ball to the water until both reach the same temperature
    2. from the water to the ball
    3. until the water has the same mass as the ball
    4. only until the ball reaches 0 °C
    Show answer

    Answer: A. Heat flows from higher to lower temperature until thermal equilibrium, when both are at the same temperature.

  4. 4. How much heat is needed to raise 250 g of water from 20 °C to 100 °C?

    1. 5 kcal
    2. 25 kcal
    3. 20 kcal
    4. 2 kcal
    Show answer

    Answer: C. Heat = 250 g × 80 °C = 20 000 cal = 20 kcal.

  5. 5. 150 g of water at 70 °C is mixed with 50 g of water at 10 °C. With no heat lost, the final temperature is

    1. 55 °C
    2. 40 °C
    3. 60 °C
    4. 45 °C
    Show answer

    Answer: A. 150(70 − T) = 50(T − 10). 10 500 − 150T = 50T − 500, so 11 000 = 200T and T = 55 °C.

  6. 6. A small cup of water at 90 °C is placed in a large tub of water at 40 °C. Which way does heat flow?

    1. From the tub to the cup, because the tub holds more heat
    2. No heat flows
    3. Both ways equally
    4. From the cup to the tub, because the cup is at the higher temperature
    Show answer

    Answer: D. Heat flow is decided by temperature, not by size or total heat content. The cup is hotter, so heat flows from it to the tub.

  7. 7. Small gaps are left between sections of railway track because of

    1. apparent expansion
    2. linear expansion of the rails
    3. cubical expansion of the sleepers
    4. Boyle's law
    Show answer

    Answer: B. Long rails lengthen noticeably on hot days (linear expansion). The gaps leave room so the rails do not buckle.

  8. 8. A rod 1.5 m long grows by 0.9 mm when heated through 50 K. Its coefficient of linear expansion is

    1. 6 × 10⁻⁴ K⁻¹
    2. 1.2 × 10⁻³ K⁻¹
    3. 1.2 × 10⁻⁵ K⁻¹
    4. 1.8 × 10⁻⁵ K⁻¹
    Show answer

    Answer: C. α_L = ΔL/(L₀ΔT) = 0.0009 ÷ (1.5 × 50) = 0.0009 ÷ 75 = 1.2 × 10⁻⁵ K⁻¹.

  9. 9. A metal sheet of area 2 m² has α_A = 3 × 10⁻⁵ K⁻¹. If heated by 100 K, its area increases by

    1. 6 × 10⁻³ m²
    2. 6 × 10⁻⁵ m²
    3. 1.5 × 10⁻³ m²
    4. 6 × 10⁻² m²
    Show answer

    Answer: A. ΔA = α_A A₀ ΔT = 3 × 10⁻⁵ × 2 × 100 = 6 × 10⁻³ m².

  10. 10. For a liquid heated in a flask, the real expansion equals

    1. the apparent expansion minus the flask's expansion
    2. the flask's expansion only
    3. the apparent expansion exactly
    4. the apparent expansion plus the flask's expansion
    Show answer

    Answer: D. Part of the liquid's true expansion fills the extra room made by the expanding flask, so real = apparent + container's expansion.

  11. 11. In the heating experiment, L₁ = 200.0 ml, L₂ = 198.8 ml and L₃ = 203.0 ml. The apparent and real expansions are

    1. 4.2 ml and 3.0 ml
    2. 3.0 ml and 4.2 ml
    3. 1.2 ml and 3.0 ml
    4. 3.0 ml and 1.2 ml
    Show answer

    Answer: B. Apparent = L₃ − L₁ = 3.0 ml. Real = L₃ − L₂ = 4.2 ml. Real is larger, as always.

  12. 12. According to the textbook's table, which of these has the largest coefficient of cubical expansion?

    1. Aluminium
    2. Glass
    3. Water
    4. Brass
    Show answer

    Answer: C. Water is listed at 20.7 × 10⁻⁵ K⁻¹, against aluminium 7, brass 6 and glass 2.5 (all × 10⁻⁵ K⁻¹). Liquids expand more than solids.

  13. 13. At constant temperature, 12 L of a gas at a pressure of 2 atm is compressed to 3 atm. Its new volume is

    1. 8 L
    2. 18 L
    3. 6 L
    4. 4 L
    Show answer

    Answer: A. P₁V₁ = P₂V₂: 2 × 12 = 3 × V₂, so V₂ = 24/3 = 8 L.

  14. 14. 2 moles of an ideal gas at 300 K fill a volume of 0.0498 m³. The pressure is about

    1. 1.0 × 10³ Pa
    2. 2.5 × 10⁵ Pa
    3. 5.0 × 10⁴ Pa
    4. 1.0 × 10⁵ Pa
    Show answer

    Answer: D. P = µRT/V = (2 × 8.31 × 300) ÷ 0.0498 = 4986 ÷ 0.0498 ≈ 100 100 Pa, about 1.0 × 10⁵ Pa.

  15. 15. How many molecules are present in 0.5 mole of a gas?

    1. 1.2044 × 10²⁴
    2. 3.011 × 10²³
    3. 6.022 × 10²³
    4. 0.5 × 10²³
    Show answer

    Answer: B. n = µN_A = 0.5 × 6.022 × 10²³ = 3.011 × 10²³.

Questions 1-3: lesson 1 (temperature, scales, equilibrium). Questions 4-6: lesson 2 (heat, calories, heat gained = heat lost). Questions 7-9: lesson 3 (expansion of solids). Questions 10-12: lesson 4 (real and apparent expansion). Questions 13-15: lesson 5 (gas laws, ideal gas equation).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery