• Practice
  • About 18 min
  • 5 practice questions

The dark reaction: Calvin cycle (C3) and the C4 pathway

Explain the three phases of the Calvin-Benson cycle and its ATP and NADPH cost, then describe the Hatch and Slack C4 pathway, Kranz anatomy and dimorphic chloroplasts, and compare C3 and C4 plants.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe carboxylation, reduction and regeneration in the C3 cycle.
  • Calculate the ATP and NADPH + H⁺ needed to make one glucose in C3 and C4 plants.
  • Explain the two stages of the C4 pathway and the roles of PEP carboxylase and RuBisCO.
  • Describe Kranz anatomy and dimorphic chloroplasts.
  • Compare C3 and C4 plants.

ATP and NADPH from the light reaction are only useful if they are spent building sugar. That happens in the stroma in the dark reaction, so called because it does not need light directly. Because it depends on enzymes and temperature, it is also called a thermochemical reaction. Plants have evolved more than one way of running it.

The C3 cycle (Calvin-Benson cycle)

Melvin Calvin, A. A. Benson and co-workers worked out this pathway; Calvin received the Nobel Prize in 1961. The CO₂ acceptor is ribulose 1,5-bisphosphate (RuBP), a 5-carbon sugar, and the enzyme is RuBP carboxylase-oxygenase (RuBisCO), the most abundant protein on Earth. The first stable product is the 3-carbon 3-phosphoglyceric acid (PGA), so this is the C3 cycle, also called the photosynthetic carbon reduction (PCR) cycle.

Three phases of the Calvin cycle

  1. Carboxylation RuBP (5C) + CO₂ → unstable 6C compound → 2 PGA (3C), by RuBisCO.
  2. Reduction (glycolytic reversal) PGA + ATP → 1,3-bisphosphoglyceric acid (PGA kinase); this + NADPH + H⁺ → glyceraldehyde 3-phosphate (G3P), which can isomerise to DHAP.
  3. Regeneration Through 3C, 4C, 5C, 6C and 7C sugar phosphates, ribulose 5-phosphate is formed and phosphorylated by ATP to RuBP.

Then back to step 1: Carboxylation

For each CO₂ fixed the cycle uses 3 ATP (2 in reduction, 1 in regeneration) and 2 NADPH + H⁺ (both in reduction). To make one hexose, the cycle must turn six times, fixing 6 CO₂; one 6-carbon sugar is the net gain.

6CO₂ + 18ATP + 12NADPH + 12H⁺ → C₆H₁₂O₆ + 6H₂O + 18ADP + 18Pi + 12NADP⁺

Worked example 1: the carbon count of the Calvin cycle

Track carbon for 6 turns. Start: 6 RuBP × 5C = 30C. Add 6 CO₂ = 6C. Total = 36C. Carboxylation gives 12 PGA × 3C = 36C. These become 12 G3P (36C). Of these, 2 G3P (6C) leave to make one glucose; the remaining 10 G3P × 3C = 30C are rearranged into 6 RuBP (30C). Carbon balances: 30 + 6 = 36 = 6 + 30. Energy: 12 ATP + 12 NADPH for reducing 12 PGA, plus 6 ATP to regenerate 6 RuBP = 18 ATP and 12 NADPH.

The C4 pathway (Hatch and Slack pathway)

In the 1960s, Kortschak, Hart and Burr found that in sugarcane the first labelled products were the 4-carbon acids malate and aspartate, not PGA; Hatch and Slack confirmed and described the pathway. Because the first product, oxaloacetic acid (OAA), is a 4-carbon dicarboxylic acid, it is called the C4 cycle or dicarboxylic acid pathway. It is found in many tropical and subtropical grasses and some dicots of warm, dry places, such as sugarcane, maize, sorghum and Amaranthus.

C4 pathway across two cell types

  1. Mesophyll: PEP (3C) + CO₂ → OAA (4C) Catalysed by PEP carboxylase, which is not inhibited by O₂.
  2. OAA → malic acid or aspartic acid The 4C acid moves to bundle sheath cells through plasmodesmata.
  3. Bundle sheath: malic acid → pyruvic acid (3C) + CO₂ Decarboxylation concentrates CO₂ around RuBisCO.
  4. CO₂ + RuBP → 2 PGA → Calvin cycle Sugar is made and sent to the phloem.
  5. Pyruvic acid returns to mesophyll It is converted back to PEP using ATP, ready to fix more CO₂.

Kranz anatomy ('Kranz' is German for wreath): each vascular bundle is surrounded by a layer of large bundle sheath cells, which in turn is ringed by mesophyll cells. C4 plants have dimorphic chloroplasts: bundle sheath chloroplasts are large, lack grana and are rich in starch; mesophyll chloroplasts are smaller, have grana and little starch. Because CO₂ is pumped into the bundle sheath, RuBisCO there works almost only as a carboxylase, so photorespiration is practically absent.

C3 and C4 plants compared (values as given in the textbook)
FeatureC3 plantsC4 plants
Cells fixing CO₂Mesophyll onlyMesophyll and bundle sheath
CO₂ acceptorRuBPPEP in mesophyll; RuBP in bundle sheath
First productPGA (3C)OAA (4C)
Kranz anatomyAbsentPresent, with dimorphic chloroplasts
Optimum temperatureAbout 20–25 °CAbout 30–45 °C
PhotorespirationHigh, so less efficientNegligible, so more efficient
Cost per glucose18 ATP, 12 NADPH + H⁺30 ATP, 12 NADPH + H⁺
ExamplesPaddy, wheat, potatoSugarcane, maize, sorghum, Amaranthus

Worked example 2: why pay more ATP?

C4 plants use 5 ATP per CO₂ (3 for the Calvin cycle plus 2 to regenerate PEP), so 6 × 5 = 30 ATP per glucose, versus 6 × 3 = 18 in C3 plants: 12 ATP extra. Why is this an advantage? In hot, bright conditions, C3 plants lose a large part of their fixed carbon to photorespiration (the textbook says up to half of photosynthetic potential can be lost). C4 plants avoid this loss, can fix CO₂ even at very low concentrations and keep stomata partly closed to save water. The extra ATP buys freedom from photorespiration, which pays off in warm, dry climates.

Key takeaways: the Calvin cycle fixes CO₂ onto RuBP via RuBisCO, reduces PGA to G3P and regenerates RuBP, costing 3 ATP and 2 NADPH per CO₂. C4 plants first fix CO₂ with PEP carboxylase in mesophyll, then release it to the Calvin cycle in Kranz bundle sheath cells, avoiding photorespiration at a cost of 5 ATP per CO₂.

Check your understanding

  1. 1. For every CO₂ molecule entering the C3 cycle, the ATP and NADPH + H⁺ required are:

    1. 2 ATP and 2 NADPH + H⁺
    2. 3 ATP and 2 NADPH + H⁺
    3. 2 ATP and 3 NADPH + H⁺
    4. 3 ATP and 3 NADPH + H⁺
    Show answer

    Answer: B. Per CO₂: two PGA are each phosphorylated (2 ATP) and reduced (2 NADPH), and RuBP regeneration uses 1 more ATP. Total 3 ATP and 2 NADPH + H⁺.

  2. 2. The first stable product of CO₂ fixation in C4 plants is:

    1. Phosphoglyceric acid
    2. Malic acid
    3. Pyruvic acid
    4. Oxaloacetic acid
    Show answer

    Answer: D. In mesophyll cells PEP carboxylase joins CO₂ to PEP to form oxaloacetic acid (OAA), a 4-carbon acid. OAA is then converted to malic or aspartic acid.

  3. 3. Which feature belongs to the bundle sheath chloroplasts of a C4 plant?

    1. Large, without grana, rich in starch
    2. Small, with grana, little starch
    3. Contain PEP carboxylase only
    4. Absent altogether
    Show answer

    Answer: A. C4 plants have dimorphic chloroplasts. Those in the bundle sheath are large, lack grana and store much starch; mesophyll chloroplasts are smaller, with grana.

  4. 4. How many molecules of ATP are needed to make one glucose in a C4 plant?

    1. 18
    2. 12
    3. 30
    4. 24
    Show answer

    Answer: C. C4 plants use 5 ATP per CO₂ (3 in the Calvin cycle plus 2 to regenerate PEP). For 6 CO₂: 6 × 5 = 30 ATP.

  5. 5. In the reduction phase of the Calvin cycle, 1,3-bisphosphoglyceric acid is reduced to:

    1. Ribulose 5-phosphate
    2. Glyceraldehyde 3-phosphate
    3. Oxaloacetic acid
    4. Phosphoglycolate
    Show answer

    Answer: B. PGA is phosphorylated by ATP to 1,3-bisphosphoglyceric acid, which NADPH + H⁺ reduces to glyceraldehyde 3-phosphate (G3P).

Privacy · Terms · Refunds · Delivery