• Practice
  • About 26 min
  • 5 practice questions

Molecular orbital theory and metallic bonding

State the features of molecular orbital theory, form bonding and antibonding orbitals by LCAO, write MO configurations of H₂, Li₂, B₂, C₂, N₂, O₂, CO and NO, calculate bond order and magnetic behaviour, and describe metallic bonding.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List the salient features of molecular orbital theory and explain LCAO.
  • Write MO electron configurations for H₂, Li₂, B₂, C₂, N₂, O₂, CO and NO.
  • Calculate bond order and predict stability, relative bond length and magnetic behaviour.
  • Explain the properties of metals using the free-electron model of metallic bonding.

Lewis and VB theory pair up all the electrons in O₂, so they predict it is diamagnetic. Yet liquid oxygen is pulled towards the poles of a strong magnet: it is paramagnetic, with unpaired electrons. Hund and Mulliken developed molecular orbital (MO) theory, which explains this.

Salient features of MO theory

  1. When atoms combine, their atomic orbitals lose their identity and form molecular orbitals spread over the molecule.
  2. The shape of an MO depends on the shapes of the atomic orbitals that combine.
  3. The number of MOs equals the number of atomic orbitals combined. Half are bonding MOs (lower energy: σ, π, δ) and half antibonding MOs (higher energy: σ*, π*, δ*).
  4. Electrons fill MOs by the Aufbau principle, Pauli's exclusion principle and Hund's rule.
  5. Bond order = (N_b − N_a)/2, where N_b and N_a are electrons in bonding and antibonding MOs. Bond order zero means the molecule does not exist.

Linear combination of atomic orbitals (LCAO)

Solving the Schrödinger equation for a molecule exactly is too hard, so MO wave functions are approximated by adding and subtracting atomic wave functions of comparable energy: ψ_bonding = ψ_A + ψ_B (constructive interference, electron density built up between the nuclei) and ψ_antibonding = ψ_A − ψ_B (destructive interference, a node between the nuclei). Two 1s orbitals give σ1s (below the 1s level) and σ*1s (above it).

Energy order of molecular orbitals

For B₂, C₂ and N₂ (and in the textbook's diagrams for CO and NO): σ1s < σ*1s < σ2s < σ*2s < π2p_y = π2p_z < σ2pₓ < π*2p_y = π*2p_z < σ*2pₓ. For O₂ (and F₂) σ2pₓ lies below the π2p pair. The two π orbitals have equal energy, so Hund's rule puts one electron in each before pairing.

MO results for diatomic molecules (counting all electrons, as the Tamil Nadu textbook does)
MoleculeN_bN_aBond orderUnpaired electronsMagnetic behaviour
H₂2010Diamagnetic
Li₂4210Diamagnetic
B₂6412 (one in each π2p)Paramagnetic
C₂8420Diamagnetic
N₂10430Diamagnetic
O₂10622 (one in each π*2p)Paramagnetic
CO10430Diamagnetic
NO1052.51 (in π*2p)Paramagnetic

Worked example 1: the MO configuration of O₂

O₂ has 16 electrons. Working: σ1s² σ*1s² σ2s² σ*2s² σ2pₓ² π2p_y² π2p_z² π*2p_y¹ π*2p_z¹. Count: 2 + 2 + 2 + 2 + 2 + 2 + 2 + 1 + 1 = 16 ✓. Bonding electrons: σ1s 2, σ2s 2, σ2pₓ 2, π 4, so N_b = 10. Antibonding: σ*1s 2, σ*2s 2, π* 2, so N_a = 6. Bond order = (10 − 6)/2 = 2. The last two electrons sit singly in the two equal-energy π* orbitals, so O₂ has two unpaired electrons: paramagnetic, as observed.

Worked example 2: oxygen ions and bond length

Remove or add electrons in the π* orbitals of O₂. Working: O₂⁺ (15 electrons): N_a = 5, bond order = (10 − 5)/2 = 2.5, one unpaired electron. O₂⁻ (17): N_a = 7, bond order = (10 − 7)/2 = 1.5, one unpaired. O₂²⁻ (18): N_a = 8, bond order = 1, no unpaired electrons, diamagnetic. Higher bond order means a shorter, stronger bond, so bond length increases O₂⁺ < O₂ < O₂⁻ < O₂²⁻.

Worked example 3: does He₂ exist?

He₂ would have 4 electrons: σ1s² σ*1s². Working: N_b = 2, N_a = 2, bond order = (2 − 2)/2 = 0. The antibonding electrons cancel the bonding ones, so a stable He₂ molecule is not expected, in agreement with helium being monatomic.

Bond order = (N_b − N_a)/2. Larger bond order: more stable, shorter and stronger bond. Any unpaired electron: paramagnetic; all paired: diamagnetic.

— Using MO results

Metallic bonding

Metals are lustrous, dense, good conductors of heat and electricity, malleable and ductile, with high melting and boiling points. The bond holding metal atoms together is neither ionic (the atoms are identical) nor ordinary covalent (each atom has too few valence electrons to share with its 8 or 12 neighbours). Drude and Lorentz pictured a metal as positive ions immersed in a 'gas' (sea) of free electrons released by the atoms; because these electrons belong to the whole crystal, the bonding is also called electronic bonding.

How the free-electron model explains metallic properties

  • Close-packed ions held by the electron sea
    • High density
    • High melting and boiling points
  • Non-directional bonding with slip planes
    • Ductile and malleable: layers slide without breaking bonds
  • Mobile electrons
    • High electrical and thermal conductivity
    • Lustre: the electron cloud reflects light

MO theory gives a better picture: the orbitals of a huge number of atoms combine into closely spaced levels forming continuous bands with no gap between filled and empty levels, so electrons can move easily and metals conduct. Electrical conductivity falls as temperature rises, because the more strongly vibrating ions disturb the regular lattice that electrons move through.

Key takeaways: MOs form by LCAO, half bonding and half antibonding. Bond order = (N_b − N_a)/2. O₂ (2 unpaired), B₂ (2) and NO (1) are paramagnetic; N₂, C₂ and CO are diamagnetic. Metals are cations in a sea of mobile electrons.

Check your understanding

  1. 1. What is the bond order of N₂ according to MO theory?

    1. 2
    2. 2.5
    3. 1
    4. 3
    Show answer

    Answer: D. N₂ (14 electrons): σ1s² σ*1s² σ2s² σ*2s² π2p_y² π2p_z² σ2pₓ². N_b = 2 + 2 + 4 + 2 = 10, N_a = 2 + 2 = 4. Bond order = (10 − 4)/2 = 3, a triple bond.

  2. 2. Which molecule is paramagnetic?

    1. C₂
    2. N₂
    3. B₂
    4. CO
    Show answer

    Answer: C. In B₂ the last two electrons go singly into the two equal-energy π2p orbitals (Hund's rule), giving two unpaired electrons. C₂, N₂ and CO have all electrons paired.

  3. 3. Which species has the shortest O–O bond?

    1. O₂⁺
    2. O₂
    3. O₂⁻
    4. O₂²⁻
    Show answer

    Answer: A. Bond orders: O₂⁺ 2.5, O₂ 2, O₂⁻ 1.5, O₂²⁻ 1. The highest bond order gives the shortest, strongest bond, so O₂⁺.

  4. 4. How is an antibonding molecular orbital formed in the LCAO method?

    1. By adding the wave functions in phase, ψ_A + ψ_B
    2. By subtracting the wave functions, ψ_A − ψ_B, which places a node between the nuclei
    3. By mixing orbitals of the same atom
    4. By transferring an electron from one atom to the other
    Show answer

    Answer: B. Out-of-phase (destructive) combination ψ_A − ψ_B removes electron density from between the nuclei and creates a node, raising the energy. Mixing orbitals of one atom is hybridisation, not MO formation.

  5. 5. Why are metals good conductors of electricity?

    1. Their atoms share electrons in fixed pairs.
    2. Their ions move freely through the crystal.
    3. They contain many lone pairs.
    4. Their valence electrons are free to move throughout the crystal.
    Show answer

    Answer: D. In a metal the valence electrons are not tied to any one ion; they form a mobile electron sea (in MO terms, bands with no gap), so they carry current when a voltage is applied. The ions stay in their lattice positions.

Privacy · Terms · Refunds · Delivery