Revision notes

Unit 10 Chemical Bonding: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Kossel-Lewis approach, Lewis structures and formal charge

Octet rule: atoms transfer or share electrons so that each atom in the bond ends up with eight electrons in its valence shell (two, a duet, for hydrogen and helium).

— Kossel-Lewis approach

Steps for a Lewis structure

  1. Skeleton Less electronegative atom in the centre; H and F always at the ends.
  2. Count valence electrons Add one per negative charge; subtract one per positive charge.
  3. Single bonds Join the atoms; each bond uses two electrons.
  4. Lone pairs Give the rest as pairs, starting with the most electronegative atoms.
  5. Check octets If an atom is short, turn a neighbour's lone pair into an extra bond.

Formal charge = N_v − (N_l + N_b/2), where N_v = valence electrons of the free atom, N_l = electrons in lone pairs on the atom, N_b = electrons in bonds around the atom.

— Formal charge

Three kinds of exception

  • Electron-deficient centre
    • BF₃: only 6 electrons on B
    • A B=F double bond would put + charge on F, so the incomplete octet is preferred
    • Also BCl₃, BeCl₂
  • Odd number of electrons
    • NO (11 valence electrons)
    • NO₂ (17 valence electrons)
    • One atom cannot complete its octet
  • Expanded valence shell
    • PCl₅: 10 electrons around P
    • SF₆: 12 electrons around S
    • Central atom of period 3 or later uses vacant d orbitals

Key takeaways: atoms bond to reach noble-gas configurations by transfer or sharing. Follow the five steps to draw Lewis structures, then use formal charge N_v − (N_l + N_b/2) to choose among them. The octet rule fails for electron-deficient (BF₃), odd-electron (NO) and expanded-octet (SF₆) molecules.

Read the full lesson

Lesson 2

Ionic and coordinate bonds, bond parameters and resonance

Selected bond enthalpies and lengths (values from the Tamil Nadu textbook)
BondBond enthalpy (kJ mol⁻¹)Bond length (Å)
H–F5650.92
H–Cl4271.27
H–Br3631.41
H–I2951.61
C–H4131.09
C–C3471.54

Resonance structures and resonance hybrid

  • Resonance structures
    • Same arrangement of atoms
    • Differ only in positions of electron pairs
    • Imaginary: none exists on its own
  • Resonance hybrid
    • The actual structure
    • Average of the canonical forms (equal bonds in CO₃²⁻ and NO₃⁻)
    • Lower in energy by the resonance energy

Key takeaways: ionic bonds form when lattice energy outweighs the cost of making ions. A coordinate bond's pair comes from one atom. Higher bond order means a shorter, stronger bond. Resonance structures differ only in electron positions; the real molecule is their hybrid.

Read the full lesson

Lesson 3

Bond polarity, Fajans rules and VSEPR theory

Dipole moment μ = charge × distance between the charges (written q × 2d in the Tamil Nadu textbook). Unit: C m; 1 debye (D) = 3.336 × 10⁻³⁰ C m.

— Dipole moment
Shapes predicted by VSEPR theory (A = central atom, B = bonded atom, L = lone pair)
Electron pairsTypeShapeExamples
2AB₂Linear (180°)BeCl₂, CO₂, HCN
3AB₃Trigonal planar (120°)BF₃, NO₃⁻, CO₃²⁻
3AB₂LBent (V)SO₂, O₃, SnCl₂
4AB₄Tetrahedral (109.5°)CH₄, CCl₄, NH₄⁺, SO₄²⁻
4AB₃LPyramidalNH₃, PF₃, H₃O⁺
4AB₂L₂Bent (V)H₂O, OF₂, SCl₂
5AB₅Trigonal bipyramidalPCl₅, AsF₅
5AB₄LSeesawSF₄
5AB₃L₂T-shapedClF₃, BrF₃
5AB₂L₃LinearXeF₂, I₃⁻
6AB₆ / AB₅L / AB₄L₂Octahedral / square pyramidal / square planarSF₆ / BrF₅, IF₅ / XeF₄, ICl₄⁻
7AB₇Pentagonal bipyramidalIF₇

Key takeaways: electronegativity difference makes bonds polar; μ = charge × distance, a vector that can cancel (CO₂, BF₃, CCl₄). Fajans: high charge, small cation, large anion and d¹⁰ cations increase covalent character. VSEPR: count pairs, place them far apart, and remember lp–lp > lp–bp > bp–bp.

Read the full lesson

Lesson 4

Valence bond theory, orbital overlap and hybridisation

Two hydrogen atoms forming H₂

  1. Far apart No interaction; potential energy zero.
  2. Approaching Attractions exceed repulsions; energy falls.
  3. 74 pm Forces balance; energy minimum; maximum overlap; bond formed.
  4. Closer than 74 pm Repulsions dominate; energy rises sharply.
Types of hybridisation
HybridisationOrbitals mixedGeometry and angleExample
spone s + one pLinear, 180° (50% s character)BeCl₂: Be [He]2s² → 2s¹2p¹ → two sp; each overlaps a Cl 3p_z
sp²one s + two pTrigonal planar, 120° (33.3% s)BF₃: B 2s²2p¹ → 2s¹2p¹2p¹ → three sp²; each overlaps an F 2p_z
sp³one s + three pTetrahedral, 109°28′ (25% s)CH₄: C 2s²2p² → 2s¹2p³ → four sp³; each overlaps an H 1s
sp³done s + three p + one d (d_z²)Trigonal bipyramidalPCl₅: P [Ne]3s²3p³ → 3s¹3p³3d¹ → five sp³d
sp³d²one s + three p + two d (d_z², d_x²−y²)OctahedralSF₆: S [Ne]3s²3p⁴ → 3s¹3p³3d² → six sp³d²

Bonding in C₂H₄ and C₂H₂

  • Ethylene, C₂H₄ (sp²)
    • Each C: three sp² orbitals in a plane at 120°, one unhybridised 2p_z
    • sp²-sp² overlap: C–C σ bond
    • sp²-1s overlaps: four C–H σ bonds
    • Sideways 2p_z-2p_z overlap: one π bond
    • Total: 5 σ + 1 π
  • Acetylene, C₂H₂ (sp)
    • Each C: two sp orbitals in a line, unhybridised 2p_y and 2p_z
    • sp-sp overlap: C–C σ bond
    • sp-1s overlaps: two C–H σ bonds
    • p_y-p_y and p_z-p_z sideways: two π bonds
    • Total: 3 σ + 2 π

Hybrid orbitals needed = σ bonds + lone pairs: 2 → sp, 3 → sp², 4 → sp³, 5 → sp³d, 6 → sp³d². π bonds use unhybridised p orbitals.

— Quick rule

Key takeaways: a bond forms at the energy minimum, where overlap of half-filled orbitals is greatest. Axial overlap gives σ, sideways overlap gives π. Hybridisation mixes orbitals of one atom into equivalent orbitals: sp linear, sp² trigonal planar, sp³ tetrahedral, sp³d trigonal bipyramidal, sp³d² octahedral.

Read the full lesson

Lesson 5

Molecular orbital theory and metallic bonding

MO results for diatomic molecules (counting all electrons, as the Tamil Nadu textbook does)
MoleculeN_bN_aBond orderUnpaired electronsMagnetic behaviour
H₂2010Diamagnetic
Li₂4210Diamagnetic
B₂6412 (one in each π2p)Paramagnetic
C₂8420Diamagnetic
N₂10430Diamagnetic
O₂10622 (one in each π*2p)Paramagnetic
CO10430Diamagnetic
NO1052.51 (in π*2p)Paramagnetic

Bond order = (N_b − N_a)/2. Larger bond order: more stable, shorter and stronger bond. Any unpaired electron: paramagnetic; all paired: diamagnetic.

— Using MO results

How the free-electron model explains metallic properties

  • Close-packed ions held by the electron sea
    • High density
    • High melting and boiling points
  • Non-directional bonding with slip planes
    • Ductile and malleable: layers slide without breaking bonds
  • Mobile electrons
    • High electrical and thermal conductivity
    • Lustre: the electron cloud reflects light

Key takeaways: MOs form by LCAO, half bonding and half antibonding. Bond order = (N_b − N_a)/2. O₂ (2 unpaired), B₂ (2) and NO (1) are paramagnetic; N₂, C₂ and CO are diamagnetic. Metals are cations in a sea of mobile electrons.

Read the full lesson

Privacy · Terms · Refunds · Delivery