- Practice
- About 28 min
- 5 practice questions
Detection and estimation of elements in organic compounds
Detect carbon, hydrogen, nitrogen, sulphur, halogens and phosphorus using the copper oxide and Lassaigne tests, and calculate percentages of C, H, S, halogens, P and N from Liebig, Carius, Dumas and Kjeldahl data.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the copper(II) oxide test and the Lassaigne sodium fusion test, with balanced equations.
- State the observations for nitrogen, sulphur, halogens and phosphorus.
- Calculate % C and % H from combustion data, % S, % X and % P from Carius data, and % N by Dumas and Kjeldahl methods.
- Find the percentage of oxygen by difference.
Analysing an unknown organic compound starts with which elements are present (qualitative analysis) and then how much of each (quantitative analysis). The main elements are C, H and O, often with N, S, halogens and P.
Detecting carbon and hydrogen: the copper(II) oxide test
The compound is ground with about three times its mass of dry CuO and heated strongly in a hard glass tube whose delivery tube dips into lime water. C + 2CuO → 2Cu + CO₂ and 2H + CuO → Cu + H₂O. Carbon dioxide turns lime water milky (CO₂ + Ca(OH)₂ → CaCO₃ + H₂O); water droplets on the cooler part of the tube turn anhydrous copper sulphate blue (CuSO₄ + 5H₂O → CuSO₄·5H₂O). This is a teacher demonstration.
Lassaigne's sodium fusion extract
N, S and halogens are covalently bound and do not give ionic tests. Fusing the compound with a small piece of sodium (a hazardous step done only by the teacher) converts them into water-soluble sodium salts: Na + C + N → NaCN; 2Na + S → Na₂S; Na + X → NaX (X = Cl, Br, I); Na + C + N + S → NaSCN. The red-hot tube is plunged into distilled water, boiled and filtered: the filtrate is the Lassaigne (sodium fusion) extract.
| Element | Test | Positive result and chemistry |
|---|---|---|
| Nitrogen | Boil with freshly prepared FeSO₄, add Fe³⁺, then conc. HCl | Prussian blue colour or precipitate: FeSO₄ + 6NaCN → Na₄[Fe(CN)₆] + Na₂SO₄; 3Na₄[Fe(CN)₆] + 4FeCl₃ → Fe₄[Fe(CN)₆]₃ + 12NaCl |
| N and S together | Add FeCl₃ to the extract | Blood-red colour of [Fe(SCN)]²⁺ from NaSCN |
| Sulphur | Sodium nitroprusside | Deep violet: Na₂S + Na₂[Fe(CN)₅NO] → Na₄[Fe(CN)₅NOS] |
| Sulphur | Acidify with acetic acid, add lead acetate | Black precipitate of PbS |
| Halogens | Boil with dilute HNO₃, then add AgNO₃ | White, soluble in NH₃: Cl. Pale yellow, sparingly soluble: Br. Yellow, insoluble: I |
| Phosphorus | Fuse with Na₂CO₃ + KNO₃, extract, boil with conc. HNO₃, add ammonium molybdate | Canary yellow colour or precipitate |
Why boil with HNO₃ before the halogen test? NaCN and Na₂S would also react with AgNO₃ (white AgCN could be mistaken for AgCl). Boiling with nitric acid drives them off: NaCN + HNO₃ → NaNO₃ + HCN; Na₂S + 2HNO₃ → 2NaNO₃ + H₂S. In the FeSO₄ test, HCl dissolves the greenish Fe(OH)₂ that would hide the Prussian blue.
Estimation formulas
| Element and method | Weighed product | Percentage |
|---|---|---|
| C (combustion, Liebig) | CO₂, y g | % C = (12/44) × (y/w) × 100 |
| H (combustion) | H₂O, x g | % H = (2/18) × (x/w) × 100 |
| S (Carius) | BaSO₄, x g | % S = (32/233) × (x/w) × 100 |
| Cl / Br / I (Carius) | AgCl / AgBr / AgI | (35.5/143.5), (80/188), (127/235) × (mass/w) × 100 |
| P | Mg₂P₂O₇ or (NH₄)₃PO₄·12MoO₃ | (62/222) or (31/1877) × (mass/w) × 100 |
| N (Dumas) | N₂, V₀ mL at STP | % N = (28/22400) × (V₀/w) × 100 |
| N (Kjeldahl) | Acid used by NH₃: V mL of normality N | % N = 1.4 × N × V / w |
| O | By difference | % O = 100 − (sum of all others) |
Combustion (C and H): dry, CO₂-free oxygen burns a weighed sample over hot CuO; water is absorbed in a weighed U-tube of conc. H₂SO₄ (on pumice) and CO₂ in weighed KOH bulbs, with a CaCl₂ guard tube. A copper spiral reduces any nitrogen oxides, a silver spiral holds back halogens, and with sulphur present lead chromate replaces CuO. Carius: the compound is heated with fuming HNO₃ in a sealed tube (with AgNO₃ for halogens); S becomes H₂SO₄, precipitated by BaCl₂ as BaSO₄. Phosphorus becomes H₃PO₄, precipitated as ammonium phosphomolybdate, or as MgNH₄PO₄ with magnesia mixture and ignited: 2MgNH₄PO₄ → Mg₂P₂O₇ + 2NH₃ + H₂O.
Worked example 1: carbon, hydrogen and oxygen
0.30 g of a compound of C, H and O gives 0.44 g CO₂ and 0.18 g H₂O (practice data). Working: mass of C = (12/44) × 0.44 = 0.12 g, so % C = 0.12 ÷ 0.30 × 100 = 40.0%. Mass of H = (2/18) × 0.18 = 0.020 g, so % H = 0.020 ÷ 0.30 × 100 = 6.67%. % O = 100 − 40.0 − 6.67 = 53.3%.
Worked example 2: sulphur, chlorine and phosphorus
- S: 0.25 g gives 0.466 g BaSO₄. Mass of S = 32 × 0.466 ÷ 233 = 0.064 g; % S = 0.064 ÷ 0.25 × 100 = 25.6%.
- Cl: 0.25 g gives 0.574 g AgCl. Mass of Cl = 35.5 × 0.574 ÷ 143.5 = 0.142 g; % Cl = 0.142 ÷ 0.25 × 100 = 56.8%.
- P: 0.50 g gives 0.444 g Mg₂P₂O₇. Mass of P = 62 × 0.444 ÷ 222 = 0.124 g; % P = 0.124 ÷ 0.50 × 100 = 24.8%.
Estimating nitrogen
Dumas method: the compound is heated with CuO in a stream of CO₂: CₓHᵧN_z + (2x + y/2)CuO → xCO₂ + (y/2)H₂O + (z/2)N₂ + (2x + y/2)Cu. A reduced copper spiral turns any nitrogen oxides into N₂. The gases pass into a Schiff's nitrometer filled with KOH, which absorbs CO₂, so only N₂ collects. Its volume is corrected for water vapour (aqueous tension) and to STP. Kjeldahl method (simpler, used for foods and fertilisers): the compound is digested with conc. H₂SO₄, K₂SO₄ and CuSO₄ until clear, converting N to (NH₄)₂SO₄; excess NaOH releases NH₃ ((NH₄)₂SO₄ + 2NaOH → Na₂SO₄ + 2NH₃ + 2H₂O), which is distilled into a measured volume of standard acid; the leftover acid is found by back titration. (It does not work for nitro, azo compounds or nitrogen in a ring, such as pyridine.)
Worked example 3: Dumas method
0.30 g of a compound gives 50.0 mL of moist N₂ at 300 K and 760 mm Hg; aqueous tension = 27 mm Hg (practice data). Working: pressure of dry N₂ = 760 − 27 = 733 mm. V₀ = (P × V × 273) ÷ (760 × T) = (733 × 50.0 × 273) ÷ (760 × 300) = 10,005,450 ÷ 228,000 = 43.9 mL. Mass of N₂ = 28 × 43.9 ÷ 22400 = 0.0549 g. % N = 0.0549 ÷ 0.30 × 100 = 18.3%.
Worked example 4: Kjeldahl method with back titration
0.50 g of a compound is Kjeldahlised and the NH₃ is absorbed in 50 mL of 0.5 N H₂SO₄. The excess acid needs 30 mL of 0.5 N NaOH (practice data). Working: acid left = 30 mL of 0.5 N; acid used by NH₃ = 50 − 30 = 20 mL of 0.5 N. % N = 1.4 × N × V ÷ w = 1.4 × 0.5 × 20 ÷ 0.50 = 28%. Check: 20 mL × 0.5 N = 10 milliequivalents = 10 mmol NH₃ = 10 × 14 mg = 0.14 g N; 0.14 ÷ 0.50 × 100 = 28% ✓.
Key takeaways: CuO test for C and H; Lassaigne extract for N (Prussian blue), S (violet with nitroprusside, black PbS), halogens (AgX colours), N + S (blood red). % element = (atomic mass in product ÷ molar mass of product) × (mass of product ÷ mass of compound) × 100; oxygen is found by difference.
Check your understanding
-
1. In Lassaigne's test, a blood-red colour with FeCl₃ shows the presence of:
- Nitrogen only
- Both nitrogen and sulphur
- Sulphur only
- A halogen
Show answer
Answer: B. When both N and S are present, fusion gives NaSCN; thiocyanate ions with Fe³⁺ give the blood-red [Fe(SCN)]²⁺. Nitrogen alone gives Prussian blue.
-
2. Why is the sodium fusion extract boiled with dilute HNO₃ before adding AgNO₃ to test for halogens?
- To decompose NaCN and Na₂S, which would otherwise react with AgNO₃
- To convert the halogens into gases
- To make the silver halides soluble
- To neutralise the AgNO₃
Show answer
Answer: A. NaCN and Na₂S would form AgCN (white, confusable with AgCl) and Ag₂S. Boiling with HNO₃ expels them as HCN and H₂S so only the halide reacts.
-
3. 0.20 g of a compound gave 0.376 g of AgBr in a Carius estimation. What is the percentage of bromine? (Ag = 108, Br = 80)
- 40.0%
- 53.3%
- 80.0%
- 21.3%
Show answer
Answer: C. Mass of Br = 80 × 0.376 ÷ 188 = 0.160 g. % Br = 0.160 ÷ 0.20 × 100 = 80.0%.
-
4. 0.40 g of a compound in a Kjeldahl estimation releases ammonia that neutralises exactly 25 mL of 0.2 N H₂SO₄. What is the percentage of nitrogen?
- 7.0%
- 35%
- 14%
- 17.5%
Show answer
Answer: D. % N = 1.4 × N × V ÷ w = 1.4 × 0.2 × 25 ÷ 0.40 = 7.0 ÷ 0.40 = 17.5%. Check: 25 × 0.2 = 5 meq = 5 mmol N = 70 mg; 0.070 ÷ 0.40 × 100 = 17.5%.
-
5. 0.15 g of an organic compound gives 0.22 g of CO₂ on complete combustion. What is the percentage of carbon?
- 40.0%
- 60.0%
- 14.7%
- 27.3%
Show answer
Answer: A. Mass of C = 12 × 0.22 ÷ 44 = 0.060 g. % C = 0.060 ÷ 0.15 × 100 = 40.0%. (27.3% is just 12/44 as a percentage, forgetting the masses.)
Sign in to keep track of the lessons you finish.