- Practice
- About 26 min
- 5 practice questions
IUPAC nomenclature of organic compounds
Name aliphatic, alicyclic and simple aromatic compounds by IUPAC rules using prefix, root word, primary suffix and secondary suffix, and write structures from names.
If something looks wrong, please tell us.
By the end of this lesson you can
- Split an IUPAC name into prefix, root word, primary suffix and secondary suffix.
- Apply the rules for choosing and numbering the parent chain and ordering substituents.
- Name compounds with a functional group, multiple bonds and substituents.
- Name simple alicyclic and benzene compounds and use o-, m- and p-.
The International Union of Pure and Applied Chemistry (IUPAC) sets the rules so that every compound has one name that anyone can turn back into a structure. A compound is named as a derivative of its parent saturated hydrocarbon.
IUPAC name = prefix(es) + root word + primary suffix + secondary suffix.
The parts of a name
- Root word: number of carbons in the parent chain: meth (1), eth (2), prop (3), but (4), pent (5), hex (6), hept (7), oct (8), non (9), dec (10), undec (11), dodec (12), icos (20).
- Primary suffix: saturation of the chain: -ane (all single), -ene (one C=C), -diene (two), -triene (three), -yne (one C≡C), -diyne (two).
- Secondary suffix: the principal functional group, added after the primary suffix minus its final 'e': -ol (alcohol), -al (aldehyde), -one (ketone), -oic acid (carboxylic acid), -oate (ester), -oyl chloride (acid chloride), -amide, -amine, -nitrile, -thiol, -sulphonic acid.
- Prefixes: substituents and lower-priority groups: fluoro, chloro, bromo, iodo, nitro, nitroso, methoxy, ethoxy, methyl, ethyl, propyl, propan-2-yl (isopropyl), 2-methylpropan-2-yl (tert-butyl), hydroxy, oxo, formyl, carboxy, amino, cyano.
The rules, step by step
- Parent chain: choose the longest continuous carbon chain. If two chains are equally long, take the one with more substituents. If a functional group is present, the chain must contain it (and the multiple bond where possible). If there are several functional groups, the one of highest precedence goes in the chain.
- Numbering: number from the end that gives the principal functional group the lowest number; terminal groups such as –CHO, –COOH, –COOR, –CONH₂ and –CN are carbon 1. Then give the lowest numbers to multiple bonds, then to substituents (lowest set of locants).
- Tie: if substituents get the same locants from either end, the one first in alphabetical order gets the lower number.
- Order: write substituents in alphabetical order; di-, tri-, tetra- are ignored when alphabetising.
- Punctuation: commas between numbers (2,2-), hyphens between numbers and letters; the name is written as one word (except for salts, acids and acid derivatives).
Order of precedence: –COOH > –SO₃H > –COOR > –COX > –CONH₂ > –CN > –CHO > >C=O > –OH > –SH > –NH₂ > C=C > C≡C > C–C > –O– > –X > –NO₂.
Worked example 1: alkanes
- CH₃–CH(CH₃)–CH₂–CH₂–CH₃: longest chain 5 C (pent-ane). Numbering from the left puts the methyl at C2 (from the right it would be C4). Name: 2-methylpentane.
- CH₃–CH(CH₃)–CH₂–CH(C₂H₅)–CH₂–CH₃: longest chain 6 C (hexane). From the left: methyl at 2, ethyl at 4, giving {2, 4}; from the right {3, 5}. Choose {2, 4}. Alphabetical order (ethyl before methyl): 4-ethyl-2-methylhexane.
- (CH₃)₃C–CH₂–CH₃: chain of 4 C with two methyls on C2: 2,2-dimethylbutane.
Worked example 2: compounds with functional groups
| Structure | Reasoning | IUPAC name |
|---|---|---|
| CH₃–CH(OH)–CH₂–CH₃ | 4 C, –OH on C2 (lower than C3) | Butan-2-ol |
| CH₂=CH–CH₂–CHO | 4 C, CHO is C1, C=C starts at C3 | But-3-enal |
| CH₃–CO–CH₂–CH(CH₃)–CH₃ | 5 C, C=O gets lowest number (C2), methyl at C4 | 4-Methylpentan-2-one |
| HOOC–CH₂–CH(OH)–CH₃ | –COOH outranks –OH, so COOH is C1 and OH becomes 'hydroxy' at C3 | 3-Hydroxybutanoic acid |
| CH₃–CH₂–CH₂–C≡N | Carbon of –CN counts in the chain: 4 C | Butanenitrile |
| CH₃–CH₂–COO–CH₃ | Ester: alkyl part (methyl) + acid part (propanoate) | Methyl propanoate |
Alicyclic compounds
- Add cyclo- to the root: cyclobutane, cyclopentane, cyclohexene.
- One substituent needs no number: methylcyclohexane, cyclohexanol.
- Two or more substituents: use the lowest set of locants, then alphabetical order: 1-ethyl-2-methylcyclopentane.
- If the side chain has more carbons than the ring, name it as an alkane with a cycloalkyl substituent (2-cyclopropylbutane); if the side chain carries the functional group or multiple bond, the ring is the substituent (2-cyclobutylpropanal).
- A ring joined directly to benzene is named as a benzene derivative: cyclopentylbenzene.
Aromatic compounds
An aromatic compound has a nucleus (the benzene ring) and may have a side chain. For two groups on the ring, positions 1,2 are ortho (o-), 1,3 meta (m-) and 1,4 para (p-). Nuclear-substituted compounds, with the group on the ring, are named as benzene derivatives: methylbenzene (toluene), 1,2-dimethylbenzene (o-xylene), 1,3,5-trimethylbenzene (mesitylene), chlorobenzene, 1-chloro-3-methylbenzene (m-chlorotoluene). Side-chain substituted compounds are named as phenyl derivatives of the aliphatic compound: C₆H₅CH₂Cl is (chloromethyl)benzene, benzyl chloride. Useful aryl groups: phenyl C₆H₅–, benzyl C₆H₅CH₂–, benzal C₆H₅CH=, and o-, m-, p-tolyl CH₃C₆H₄–.
Worked example 3: from name to structure
- 3-Methylbut-1-ene: but = 4 C chain; -1-ene = C=C from C1 to C2; methyl on C3: CH₂=CH–CH(CH₃)–CH₃.
- 2-Chloropropanoic acid: prop = 3 C including the COOH carbon (C1); Cl on C2: CH₃–CHCl–COOH.
- 1-Bromo-3-nitrobenzene: a benzene ring with Br and NO₂ in meta positions (m-bromonitrobenzene); 'bromo' comes first alphabetically, so it gets position 1.
Key takeaways: find the longest chain containing the principal group; number to give that group, then multiple bonds, then substituents the lowest locants; list prefixes alphabetically. Rings take cyclo-; benzene positions are o- (1,2), m- (1,3), p- (1,4).
Check your understanding
-
1. What is the IUPAC name of CH₃–CH₂–CH(CH₃)–CH₂–CH₂–CH₃?
- 4-Methylhexane
- 2-Ethylpentane
- 3-Methylhexane
- 1-Ethyl-1-methylbutane
Show answer
Answer: C. The longest chain has 6 carbons (hexane). Numbering from the left puts the methyl at C3; from the right it would be C4, so 3 is used: 3-methylhexane.
-
2. What is the IUPAC name of CH₃–CH=CH–CH₂–OH?
- But-2-en-1-ol
- But-2-en-4-ol
- But-3-en-1-ol
- Butan-1-ol
Show answer
Answer: A. The –OH (principal group) must get the lowest number, so its carbon is C1. The C=C then starts at C2: but-2-en-1-ol.
-
3. Which functional group has the highest precedence when choosing the principal group?
- –OH
- –CHO
- –NH₂
- –COOH
Show answer
Answer: D. Carboxylic acid ranks first: –COOH > –SO₃H > –COOR > –COX > –CONH₂ > –CN > –CHO > >C=O > –OH > –SH > –NH₂.
-
4. What is the correct IUPAC name for CH₃–CH(Cl)–CH(CH₃)–CH₃?
- 3-Chloro-2-methylbutane
- 2-Chloro-3-methylbutane
- 2-Methyl-3-chlorobutane
- 1-Chloro-1,2-dimethylpropane
Show answer
Answer: B. Longest chain: 4 C (butane). Substituents get locants {2, 3} from either end, so the tie is broken alphabetically: chloro comes before methyl and gets the lower number: 2-chloro-3-methylbutane.
-
5. 1,4-Dimethylbenzene is also called:
- o-xylene
- m-xylene
- p-xylene
- mesitylene
Show answer
Answer: C. Positions 1 and 4 are opposite each other on the ring: para. Ortho is 1,2, meta is 1,3, and mesitylene is 1,3,5-trimethylbenzene.
Sign in to keep track of the lessons you finish.