Revision notes

Unit 11 Fundamentals of Organic Chemistry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Carbon, characteristics and classification of organic compounds

Hybridisation and shape of carbon
HybridisationBonds formedGeometryExample
sp³Four σTetrahedral (109°28′)CH₄, C₂H₆
sp²Three σ + one πTrigonal planar (120°)C₂H₄, HCHO
spTwo σ + two πLinear (180°)C₂H₂, HCN

Alkanes CₙH₂ₙ₊₂, alkenes CₙH₂ₙ, alkynes CₙH₂ₙ₋₂. Successive members of a homologous series differ by CH₂ (14 mass units).

— General formulae

Organic compounds by structure

  • Acyclic (open chain, aliphatic)
    • Straight or branched chains
    • Propane CH₃–CH₂–CH₃
    • Saturated or unsaturated
  • Cyclic, homocyclic (ring of carbon only)
    • Alicyclic: cyclopropane, cyclohexane
    • Aromatic benzenoid: benzene, phenol
    • Aromatic non-benzenoid: azulene
  • Cyclic, heterocyclic (ring includes O, N or S)
    • Alicyclic: tetrahydrofuran (THF)
    • Aromatic: pyridine, thiophene
Some classes of organic compounds (R = alkyl group)
ClassFunctional groupGeneral formula
Alkyl halide–X (F, Cl, Br, I)R–X
Alcohol–OHR–OH
Ether–O–R–O–R′
Aldehyde–CHOR–CHO
Ketone>C=OR–CO–R′
Carboxylic acid–COOHR–COOH
Ester–COORR–COO–R′
Amine–NH₂R–NH₂
Amide–CONH₂R–CONH₂
Nitrile–C≡NR–CN
Nitroalkane–NO₂R–NO₂
Thiol–SHR–SH

Key takeaways: catenation and tetravalency give carbon its huge variety. Organic compounds are covalent, mostly flammable, low-melting, and grouped by functional group into homologous series differing by CH₂. By structure they are acyclic or cyclic; cyclic compounds are homocyclic or heterocyclic, alicyclic or aromatic.

Read the full lesson

Lesson 2

IUPAC nomenclature of organic compounds

IUPAC name = prefix(es) + root word + primary suffix + secondary suffix.

— Parts of an IUPAC name

Order of precedence: –COOH > –SO₃H > –COOR > –COX > –CONH₂ > –CN > –CHO > >C=O > –OH > –SH > –NH₂ > C=C > C≡C > C–C > –O– > –X > –NO₂.

— Priority of functional groups (Tamil Nadu textbook)
Naming with a principal functional group
StructureReasoningIUPAC name
CH₃–CH(OH)–CH₂–CH₃4 C, –OH on C2 (lower than C3)Butan-2-ol
CH₂=CH–CH₂–CHO4 C, CHO is C1, C=C starts at C3But-3-enal
CH₃–CO–CH₂–CH(CH₃)–CH₃5 C, C=O gets lowest number (C2), methyl at C44-Methylpentan-2-one
HOOC–CH₂–CH(OH)–CH₃–COOH outranks –OH, so COOH is C1 and OH becomes 'hydroxy' at C33-Hydroxybutanoic acid
CH₃–CH₂–CH₂–C≡NCarbon of –CN counts in the chain: 4 CButanenitrile
CH₃–CH₂–COO–CH₃Ester: alkyl part (methyl) + acid part (propanoate)Methyl propanoate

Key takeaways: find the longest chain containing the principal group; number to give that group, then multiple bonds, then substituents the lowest locants; list prefixes alphabetically. Rings take cyclo-; benzene positions are o- (1,2), m- (1,3), p- (1,4).

Read the full lesson

Lesson 3

Representing organic molecules and isomerism

Types of isomerism

  • Constitutional (structural)
    • Chain
    • Position
    • Functional
    • Metamerism
    • Tautomerism
    • Ring-chain
  • Stereoisomerism
    • Geometrical (cis-trans, syn-anti)
    • Optical (enantiomers)
Constitutional isomerism with examples
TypeWhat differsExample
Chain (skeletal)Straight or branched carbon skeletonC₄H₁₀: butane and 2-methylpropane
PositionPosition of a group or multiple bond on the same skeletonC₃H₈O: propan-1-ol and propan-2-ol; C₄H₈: but-1-ene and but-2-ene
FunctionalFunctional groupC₂H₆O: ethanol and methoxymethane; C₃H₆O: propanal and propanone
MetamerismAlkyl groups on either side of the same functional group (ethers, ketones, esters, secondary amines)C₄H₁₀O: ethoxyethane and 1-methoxypropane
TautomerismPosition of a hydrogen; the two forms interconvert readilyKeto-enol: propanone ⇌ prop-1-en-2-ol; dyad: H–C≡N ⇌ H–N≡C
Ring-chainOpen chain versus ringC₃H₆: propene and cyclopropane

Key takeaways: bond-line formulas show carbons as corners and ends. Same formula, different connectivity: structural isomers (chain, position, functional, metamers, tautomers, ring-chain). Same connectivity, different spatial arrangement: stereoisomers. Cis-trans needs two different groups on each C=C carbon; optical isomerism needs a non-superimposable mirror image, usually from a carbon with four different groups.

Read the full lesson

Lesson 4

Detection and estimation of elements in organic compounds

Tests on the sodium fusion extract
ElementTestPositive result and chemistry
NitrogenBoil with freshly prepared FeSO₄, add Fe³⁺, then conc. HClPrussian blue colour or precipitate: FeSO₄ + 6NaCN → Na₄[Fe(CN)₆] + Na₂SO₄; 3Na₄[Fe(CN)₆] + 4FeCl₃ → Fe₄[Fe(CN)₆]₃ + 12NaCl
N and S togetherAdd FeCl₃ to the extractBlood-red colour of [Fe(SCN)]²⁺ from NaSCN
SulphurSodium nitroprussideDeep violet: Na₂S + Na₂[Fe(CN)₅NO] → Na₄[Fe(CN)₅NOS]
SulphurAcidify with acetic acid, add lead acetateBlack precipitate of PbS
HalogensBoil with dilute HNO₃, then add AgNO₃White, soluble in NH₃: Cl. Pale yellow, sparingly soluble: Br. Yellow, insoluble: I
PhosphorusFuse with Na₂CO₃ + KNO₃, extract, boil with conc. HNO₃, add ammonium molybdateCanary yellow colour or precipitate
Percentage of an element (w = mass of compound in g)
Element and methodWeighed productPercentage
C (combustion, Liebig)CO₂, y g% C = (12/44) × (y/w) × 100
H (combustion)H₂O, x g% H = (2/18) × (x/w) × 100
S (Carius)BaSO₄, x g% S = (32/233) × (x/w) × 100
Cl / Br / I (Carius)AgCl / AgBr / AgI(35.5/143.5), (80/188), (127/235) × (mass/w) × 100
PMg₂P₂O₇ or (NH₄)₃PO₄·12MoO₃(62/222) or (31/1877) × (mass/w) × 100
N (Dumas)N₂, V₀ mL at STP% N = (28/22400) × (V₀/w) × 100
N (Kjeldahl)Acid used by NH₃: V mL of normality N% N = 1.4 × N × V / w
OBy difference% O = 100 − (sum of all others)

Key takeaways: CuO test for C and H; Lassaigne extract for N (Prussian blue), S (violet with nitroprusside, black PbS), halogens (AgX colours), N + S (blood red). % element = (atomic mass in product ÷ molar mass of product) × (mass of product ÷ mass of compound) × 100; oxygen is found by difference.

Read the full lesson

Lesson 5

Purification of organic compounds

Choosing a purification method

  • Solids
    • Sublimation: solid that turns directly to vapour
    • Crystallisation: most solids
    • Fractional crystallisation: solids of different solubility
  • Liquids
    • Simple distillation: boiling points far apart
    • Fractional distillation: boiling points close
    • Distillation under reduced pressure: decompose at their boiling point
    • Steam distillation: steam-volatile, water-insoluble
    • Azeotropic distillation: constant-boiling mixtures
  • Solutions and mixtures
    • Differential extraction: solute from water into an organic solvent
    • Chromatography: small amounts, many components

Adsorption and partition chromatography

  • Adsorption (solid stationary phase)
    • Column chromatography: alumina or silica gel in a glass column; strongly adsorbed components stay near the top
    • Thin layer chromatography (TLC): thin adsorbent layer on a glass plate
    • Components adsorbed to different extents move different distances
  • Partition (liquid stationary phase)
    • Paper chromatography: water held in the chromatography paper is the stationary phase
    • Components divide differently between paper-held water and the moving solvent
    • Colourless spots shown by UV light or a spray reagent

Retention factor R_f = distance moved by the substance from the starting line ÷ distance moved by the solvent front from the starting line.

— TLC and paper chromatography

Key takeaways: sublimation and crystallisation purify solids; simple, fractional, reduced-pressure, steam and azeotropic distillation purify liquids; extraction moves a solute between immiscible solvents; chromatography separates by adsorption or partition, with R_f = distance of spot ÷ distance of solvent.

Read the full lesson

Privacy · Terms · Refunds · Delivery