- Practice
- About 22 min
- 5 practice questions
Drinking water standards, soil pollution and green chemistry
Use the drinking water standards given in the textbook to judge water samples, explain the effects of fluoride, lead, sulphate, nitrate and dissolved solids, describe soil pollution by fertilisers, pesticides and industrial waste, and apply strategies of pollution control and green chemistry.
If something looks wrong, please tell us.
By the end of this lesson you can
- State the drinking water limits given in the textbook and judge a sample against them.
- Explain how fluoride protects teeth and what happens with too much fluoride, lead, sulphate, nitrate or dissolved solids.
- Describe how fertilisers, pesticides and industrial wastes pollute soil.
- List strategies to control pollution and explain the idea of green chemistry with examples.
Knowing what pollutes the environment is only half the subject; the other half is knowing what is safe and how chemistry itself can be made cleaner.
Quality of drinking water
Standards for drinking water are set by the World Health Organization (WHO) internationally, and in India by the Bureau of Indian Standards (BIS) and the Indian Council of Medical Research (ICMR). The textbook gives the following desirable limits, from the BIS standards of 1991.
| Characteristic | Desirable limit |
|---|---|
| pH | 6.5 to 8.5 |
| Total dissolved solids (TDS) | 500 ppm |
| Total hardness (as CaCO₃) | 300 ppm |
| Nitrate | 45 ppm |
| Chloride | 250 ppm |
| Sulphate | 200 ppm |
| Fluoride | 1 ppm |
| E. coli | None at all |
| Coliforms | Not more than 10 in a 100 mL sample |
- Fluoride: too little causes tooth decay, so soluble fluorides are added to bring it up to about 1 ppm. F⁻ converts the hydroxyapatite of tooth enamel, 3Ca₃(PO₄)₂·Ca(OH)₂, into harder fluorapatite, 3Ca₃(PO₄)₂·CaF₂. Above 2 ppm it causes brown mottling of teeth, and excess damages bones and teeth.
- Lead: above 50 ppb it can damage the liver, kidneys and reproductive system.
- Sulphate: moderate levels are harmless, but above 500 ppm it has a laxative effect.
- Nitrate: above 45 ppm it can cause methaemoglobinaemia (blue baby syndrome) in infants.
- TDS: dissolved Ca²⁺, Mg²⁺, Na⁺, K⁺, Fe ions, carbonate, bicarbonate, chloride, sulphate, phosphate and nitrate; above 500 ppm it may irritate the stomach and intestines.
Worked example 1: is this well water fit to drink?
Made-up test results: pH 7.4; TDS 620 mg L⁻¹; fluoride 0.8 mg L⁻¹; nitrate 30 mg L⁻¹; sulphate 540 mg L⁻¹; no E. coli. Step 1: use 1 mg L⁻¹ ≈ 1 ppm. Step 2: compare with the limits. pH 7.4 is inside 6.5–8.5 (pass). TDS 620 > 500 (fail). Fluoride 0.8 < 1 (pass). Nitrate 30 < 45 (pass). Sulphate 540 > 200, and above the 500 ppm at which a laxative effect appears (fail). Conclusion: the water is not suitable without treatment; its high sulphate explains a laxative effect in people who drink it.
Worked example 2: converting units
A 250 mL sample contains 0.30 mg of fluoride. Working: concentration = 0.30 mg ÷ 0.250 L = 1.2 mg L⁻¹ = 1.2 ppm. This is above the desirable 1 ppm but below the 2 ppm at which mottling starts.
Soil pollution
Soil is the thin layer of organic and inorganic material over the earth's rocky surface that supports plants and animals. Soil pollution is the build-up of persistent toxic compounds, radioactive materials, salts and disease-causing agents that harm plant growth and animal health; it damages soil structure and fertility, ground water and food chains.
- Artificial fertilisers: plants take C, H and O from air and water, and N, P, K, Ca, Mg and S from soil. Fertilisers make up deficiencies, but excessive use of NPK or phosphate fertilisers ends up reducing the yield of that soil.
- Insecticides such as DDT, BHC and aldrin stay in soil for a long time and contaminate root crops such as carrot and radish.
- Fungicides: organomercury compounds, the commonest fungicides, release highly toxic mercury in soil.
- Herbicides (weed killers) such as sodium chlorate, NaClO₃, and sodium arsenite, Na₃AsO₃; most are toxic to mammals.
- Industrial wastes, especially from mining and manufacturing: cyanides, chromates, acids, alkalis and metals such as mercury, copper, zinc, cadmium and lead, which stay in soil and make it unusable.
Strategies to control pollution
- Waste management: reduce waste and dispose of it properly (segregation, dumping, incineration, composting).
- Recycling, which reduces landfill and turns waste into useful material.
- Replacing highly toxic solvents in industry with less toxic ones.
- Using low-sulphur fuels, such as washed coal.
- Growing more trees.
- Controlling vehicle emissions.
Green chemistry
Green chemistry is a way of doing chemistry that designs products and processes to reduce or eliminate the use and generation of hazardous substances, instead of cleaning up pollution afterwards.
Traditional and greener choices described in the textbook
-
Traditional
- Styrene from carcinogenic benzene + ethene, then dehydrogenation over Fe₂O₃/Al₂O₃
- Dry cleaning with tetrachloroethylene, which pollutes ground water
- Bleaching paper with chlorine
- Chlorinated hydrocarbon pesticides
-
Greener
- Styrene from cheaper, safer xylenes
- Liquefied CO₂ with a suitable detergent; H₂O₂ for laundry bleaching
- H₂O₂ with a catalyst
- Neem-based pesticides
Another example is the one-step manufacture of acetaldehyde by oxidising ethene in water with a Pd(II)/Cu(II) catalyst, CH₂=CH₂ + [O] → CH₃CHO, which the textbook says gives about 90% yield. The textbook also mentions methanol as an automobile fuel in place of petrol.
Worked example 3: atom count for the acetaldehyde route
CH₂=CH₂ + ½O₂ → CH₃CHO. C: 2 = 2; H: 4 = 4; O: 1 = 1. Every atom of ethene and of the oxygen ends up in the product, so no by-product is formed, one reason this route counts as greener. At the textbook's 90% yield, 28 g (1 mol) of ethene gives 0.90 × 44 = 39.6 g of acetaldehyde.
Key takeaways: drinking water should meet limits such as pH 6.5–8.5, TDS 500 ppm, nitrate 45 ppm, fluoride 1 ppm and no E. coli (BIS 1991 values in the textbook); fluoride hardens enamel as fluorapatite but mottles teeth above 2 ppm. Fertilisers, pesticides and industrial wastes pollute soil. Waste management, recycling, cleaner fuels and green chemistry reduce pollution at the source.
Check your understanding
-
1. How does fluoride in drinking water protect teeth?
- It kills all bacteria in the mouth
- It converts hydroxyapatite in enamel into harder fluorapatite
- It dissolves plaque
- It increases the pH of saliva to 10
Show answer
Answer: B. F⁻ replaces the OH⁻ part of hydroxyapatite, 3Ca₃(PO₄)₂·Ca(OH)₂, giving fluorapatite, 3Ca₃(PO₄)₂·CaF₂, which is harder and resists decay. Too much fluoride (above about 2 ppm) mottles teeth.
-
2. A baby develops blue baby syndrome after being fed with formula made from well water. The pollutant most likely in excess is
- fluoride
- sulphate
- nitrate
- chloride
Show answer
Answer: C. Nitrate above about 45 ppm can cause methaemoglobinaemia (blue baby syndrome), in which the blood carries less oxygen. Excess sulphate is laxative and excess fluoride mottles teeth.
-
3. A 500 mL water sample contains 30 mg of nitrate. Compared with the textbook's limit of 45 ppm, the sample is
- 15 ppm, within the limit
- 30 ppm, within the limit
- 45 ppm, exactly at the limit
- 60 ppm, above the limit
Show answer
Answer: D. Concentration = 30 mg ÷ 0.500 L = 60 mg L⁻¹ ≈ 60 ppm, which is above 45 ppm, so the water is unsafe for infants.
-
4. Which of these is a herbicide named in the textbook?
- Sodium chlorate, NaClO₃
- DDT
- An organomercury compound
- Aldrin
Show answer
Answer: A. Sodium chlorate (and sodium arsenite) are weed killers, that is, herbicides. DDT and aldrin are insecticides, and organomercury compounds are fungicides.
-
5. Which change is an example of green chemistry?
- Using more chlorine to bleach paper faster
- Replacing tetrachloroethylene in dry cleaning with liquefied CO₂ and a detergent
- Burning plastic waste in the open
- Using high-sulphur coal in power stations
Show answer
Answer: B. Green chemistry designs processes that avoid hazardous substances. Liquefied CO₂ does the cleaning job without the carcinogenic solvent that pollutes ground water. The other options increase hazardous emissions.
Sign in to keep track of the lessons you finish.