- Practice
- About 22 min
- 5 practice questions
Greenhouse effect, global warming and acid rain
Explain how greenhouse gases trap infrared radiation and why an enhanced greenhouse effect causes global warming, and describe how acid rain forms, why normal rain has pH 5.6 and how acid rain damages buildings, water, soil and health.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain the greenhouse effect in terms of visible light in and infrared radiation out.
- Name the main greenhouse gases and the textbook's order of their global warming potential.
- Explain why normal rain is slightly acidic and when rain is called acid rain.
- Write the equations for acid rain formation and its attack on marble, and list its harmful effects.
Two of the most widely felt effects of air pollution are a warmer planet and acid rain. Both come from gases released when fuels burn, and both are explained by simple chemistry.
The greenhouse effect
How the greenhouse effect warms the earth
- Sunlight comes in Most visible light passes through the atmosphere
- Surface warms The ground and oceans absorb the light
- Infrared goes out The warm surface radiates longer-wavelength IR
- Gases absorb IR CO₂, CH₄, CFCs and water vapour absorb much of it
- Heat comes back Part of the absorbed energy is re-emitted to the surface
This heating of the earth's surface by gases that trap outgoing infrared radiation is the greenhouse effect, named after a glass greenhouse that lets light in but keeps heat inside. It is natural and necessary: without it, the earth's average surface temperature would be only about −18 °C. Burning fuels, cutting forests and other activities add more greenhouse gases and intensify the effect; the resulting rise in average temperature is global warming.
Greenhouse gases include CO₂, CH₄, N₂O, O₃, CFCs and water vapour. Their heat-retaining capacity is their global warming potential (GWP); the textbook gives the order CFC > N₂O > CH₄ > CO₂ per molecule, although CO₂ matters most overall because there is so much more of it. The textbook warns that continued warming could melt polar ice, flood low-lying areas and increase infectious diseases such as dengue and malaria.
Acid rain
Even clean rain is slightly acidic, because it dissolves atmospheric CO₂ to form carbonic acid (CO₂ + H₂O ⇌ H₂CO₃); its pH is about 5.6. Oxides of sulphur and nitrogen from power stations, furnaces and vehicle engines dissolve in cloud droplets and are converted to sulphuric and nitric acids. Rain with pH below 5.6 is acid rain.
2SO₂ + O₂ + 2H₂O → 2H₂SO₄ and 4NO₂ + O₂ + 2H₂O → 4HNO₃
Worked example 1: checking the acid rain equations
Sulphuric acid: S 2 = 2; O 4 + 2 + 2 = 8 and 2 × 4 = 8; H 4 = 4. Nitric acid: N 4 = 4; O 8 + 2 + 2 = 12 and 4 × 3 = 12; H 4 = 4. Both balanced.
Worked example 2: how much more acidic?
Compare rain of pH 5.6 with rain of pH 4.6. Since pH = −log[H⁺], [H⁺] = 10⁻ᵖᴴ. At pH 5.6, [H⁺] = 10⁻⁵·⁶ ≈ 2.5 × 10⁻⁶ mol L⁻¹; at pH 4.6, [H⁺] = 10⁻⁴·⁶ ≈ 2.5 × 10⁻⁵ mol L⁻¹. Ratio = 10⁻⁴·⁶ ÷ 10⁻⁵·⁶ = 10¹ = 10 times more H⁺. A drop of one pH unit means ten times the acidity.
Harmful effects of acid rain
- It attacks marble and limestone buildings and statues, a damage called stone leprosy: CaCO₃ + H₂SO₄ → CaSO₄ + H₂O + CO₂↑. The textbook illustrates this with the Taj Mahal.
- It harms plant and animal life in lakes and rivers.
- It dissolves and washes away soil nutrients that crops and trees need.
- It corrodes water pipes, so iron, lead and copper leach into drinking water.
- It causes respiratory ailments in people and animals.
Worked example 3: marble eaten by acid
How much marble (CaCO₃) can 4.9 g of H₂SO₄ dissolve? Molar mass H₂SO₄ = 2 + 32 + 64 = 98 g mol⁻¹, so 4.9 g = 0.05 mol. The equation is 1 : 1, so 0.05 mol CaCO₃ reacts. Molar mass CaCO₃ = 40 + 12 + 48 = 100 g mol⁻¹. Mass = 0.05 × 100 = 5.0 g of marble, releasing 0.05 mol of CO₂. Atom check: Ca 1 = 1; C 1 = 1; O 3 + 4 = 7 and 4 + 1 + 2 = 7; S 1 = 1; H 2 = 2.
Greenhouse effect and acid rain compared
-
Enhanced greenhouse effect
- Main gases: CO₂, CH₄, N₂O, CFCs
- Gases absorb outgoing infrared
- Effect: global warming, melting ice, flooding
- A global problem
-
Acid rain
- Main gases: SO₂ and NO₂
- Gases form H₂SO₄ and HNO₃ in clouds
- Effect: pH below 5.6; stone leprosy, damage to water, soil and health
- Often regional, downwind of the sources
Key takeaways: greenhouse gases let sunlight in but absorb outgoing infrared, keeping the earth about 33 °C warmer than −18 °C; adding more of them causes global warming. Normal rain has pH 5.6 from dissolved CO₂; SO₂ and NO₂ make it more acidic, and acid rain eats marble, harms water life, leaches soil and corrodes pipes.
Check your understanding
-
1. Which radiation do greenhouse gases mainly absorb?
- Incoming visible sunlight
- Infrared radiation given out by the warm earth
- Ultraviolet radiation from the sun
- Radio waves
Show answer
Answer: B. The atmosphere lets most visible light through. The warmed surface radiates longer-wavelength infrared, and gases such as CO₂, CH₄ and water vapour absorb and partly re-emit it, warming the surface.
-
2. Without any greenhouse effect at all, the earth's average surface temperature would be about
- −18 °C
- 0 °C
- 15 °C
- 100 °C
Show answer
Answer: A. The natural greenhouse effect keeps the earth habitable; without it the average surface temperature would be only about −18 °C. The problem is the extra warming from added gases.
-
3. Why does unpolluted rain water have a pH of about 5.6 rather than 7?
- It contains dissolved sulphuric acid
- It dissolves atmospheric CO₂, forming weak carbonic acid
- It contains ammonia
- It dissolves ozone
Show answer
Answer: B. CO₂ + H₂O ⇌ H₂CO₃, and carbonic acid releases a little H⁺, lowering the pH to about 5.6. Only when SO₂ and NO₂ add stronger acids and the pH falls below 5.6 is it called acid rain.
-
4. Rain sample P has pH 4.0 and sample Q has pH 6.0. How many times greater is [H⁺] in P than in Q?
- 2
- 10
- 100
- 1000
Show answer
Answer: C. [H⁺] = 10⁻ᵖᴴ. P: 10⁻⁴; Q: 10⁻⁶. Ratio 10⁻⁴ ÷ 10⁻⁶ = 10² = 100. Each pH unit is a factor of ten.
-
5. What is stone leprosy?
- Cracking of rocks by frost
- Growth of moss on old buildings
- Corrosion of marble and limestone by acid rain
- Deposition of soot on statues
Show answer
Answer: C. Acid rain reacts with the calcium carbonate of marble, CaCO₃ + H₂SO₄ → CaSO₄ + H₂O + CO₂, slowly eating away the surface of buildings and statues.
Sign in to keep track of the lessons you finish.