Revision notes

Unit 15 Environmental Chemistry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Environmental pollution, the atmosphere and gaseous air pollutants

Two kinds of pollutants

  • Biodegradable
    • Broken down by natural biological processes
    • Examples: plant wastes, animal wastes
    • Cause harm mainly when present in excess
  • Non-biodegradable
    • Not broken down by natural processes
    • Examples: mercury and lead wastes, DDT, plastics, nuclear wastes
    • Harmful even at low concentration and hard to remove
Regions of the atmosphere (values from the textbook)
RegionAltitudeTemperatureMain species
Troposphere0–10 km15 °C to −56 °CN₂, O₂, CO₂, water vapour
Stratosphere (ozonosphere)10–50 km−56 °C to −2 °CN₂, O₂, O₃, O atoms
Mesosphere50–85 km−2 °C to −92 °CN₂, O₂⁺, NO⁺
Thermosphere85–500 km−92 °C to 1200 °CO₂⁺, O⁺, NO⁺, electrons

SO₂ → SO₃ → H₂SO₄ and NO → NO₂ → HNO₃: the sulphur and nitrogen oxides of fuels end up as the acids of acid rain.

— Fate of SOₓ and NOₓ

Key takeaways: pollution is any harmful change in the environment; non-biodegradable pollutants such as Hg, Pb, DDT and plastics persist. The troposphere (0–10 km) holds most of the air and most air pollution. SO₂ and NO₂ form acids, CO forms carboxyhaemoglobin, excess CO₂ warms the earth and PAHs cause cancer.

Read the full lesson

Lesson 2

Greenhouse effect, global warming and acid rain

How the greenhouse effect warms the earth

  1. Sunlight comes in Most visible light passes through the atmosphere
  2. Surface warms The ground and oceans absorb the light
  3. Infrared goes out The warm surface radiates longer-wavelength IR
  4. Gases absorb IR CO₂, CH₄, CFCs and water vapour absorb much of it
  5. Heat comes back Part of the absorbed energy is re-emitted to the surface

2SO₂ + O₂ + 2H₂O → 2H₂SO₄ and 4NO₂ + O₂ + 2H₂O → 4HNO₃

— Formation of acid rain

Greenhouse effect and acid rain compared

  • Enhanced greenhouse effect
    • Main gases: CO₂, CH₄, N₂O, CFCs
    • Gases absorb outgoing infrared
    • Effect: global warming, melting ice, flooding
    • A global problem
  • Acid rain
    • Main gases: SO₂ and NO₂
    • Gases form H₂SO₄ and HNO₃ in clouds
    • Effect: pH below 5.6; stone leprosy, damage to water, soil and health
    • Often regional, downwind of the sources

Key takeaways: greenhouse gases let sunlight in but absorb outgoing infrared, keeping the earth about 33 °C warmer than −18 °C; adding more of them causes global warming. Normal rain has pH 5.6 from dissolved CO₂; SO₂ and NO₂ make it more acidic, and acid rain eats marble, harms water life, leaches soil and corrodes pipes.

Read the full lesson

Lesson 3

Particulate pollutants and smog

Types of particulates

  • Viable (living)
    • Bacteria, fungi, moulds, algae
    • Some fungi cause allergy in people and disease in plants
  • Smoke
    • Solid, or solid and liquid, particles from burning organic matter
    • Cigarette smoke, burning fuel, garbage, dry leaves
  • Dust
    • Fine solids from crushing and grinding
    • Sand blasting, saw dust, cement dust, fly ash
  • Mists
    • Spray droplets and condensed vapour
    • Sulphuric acid mist, herbicide and insecticide sprays
  • Fumes
    • Condensed vapours from sublimation, distillation, boiling, calcination
    • Organic solvents, metals, metal oxides
Classical smog and photochemical smog
FeatureClassical (London) smogPhotochemical (Los Angeles) smog
Made fromCoal smoke and fog: SO₂, SO₃ and moistureNOₓ and hydrocarbons from vehicles, acted on by sunlight
ClimateCool and humidWarm, dry and sunny
Chemical natureReducing (high SO₂): reducing smogOxidising (NO₂, O₃): oxidising smog
Key chemistrySO₂ → SO₃ → H₂SO₄ aerosolNO₂ splits in sunlight; O₃ builds up; HCHO, acrolein, PAN form
Main effectsAcid rain, poor visibility, bronchial irritationEye, skin and lung irritation, asthma, plant damage, corrosion

How sunlight builds up ozone in polluted air

  1. NO₂ + sunlight → NO + O Nitrogen dioxide from traffic splits
  2. O + O₂ → O₃ The oxygen atom makes ozone
  3. O₃ + NO → NO₂ + O₂ Ozone is used up, regenerating NO₂

Then back to step 1: NO₂ + sunlight → NO + O

Key takeaways: particulates are viable (microbes) or non-viable (smoke, dust, mists, fumes); fine ones reach the lungs and cause pneumoconiosis; they are removed by precipitators, settling chambers, scrubbers and cyclones. Classical smog is SO₂-rich, reducing and cool-humid; photochemical smog is NOₓ + hydrocarbons + sunlight, oxidising, and contains O₃, HCHO, acrolein and PAN.

Read the full lesson

Lesson 4

Ozone depletion and water pollution

The chlorine radical destroys ozone and is regenerated

  1. Cl• + O₃ → ClO• + O₂ Chlorine radical takes an O from ozone
  2. ClO• + O → Cl• + O₂ The free chlorine radical is released again

Then back to step 1: Cl• + O₃ → ClO• + O₂

Major water pollutants and their sources (from the textbook)
PollutantSource
MicroorganismsDomestic sewage and waste water, dung heaps
Organic wastesSewage, animal excreta, food-processing waste, detergents, decayed plants and animals
Plant nutrientsChemical fertilisers
Heavy metalsFactories using or producing heavy metals
SedimentsSoil erosion by farming and strip mining
PesticidesChemicals for killing insects, fungi and weeds
Radioactive substancesMining of uranium minerals
HeatCooling water from industries

Eutrophication step by step

  1. Excess nutrients enter Fertiliser run-off, sewage, detergents
  2. Algal bloom Algae and weeds grow explosively and cover the surface
  3. Plants die and decay Microbes decomposing them use up dissolved oxygen
  4. Oxygen runs out Fish and other animals die; biodiversity is lost

Key takeaways: UV makes stratospheric ozone; NO and Cl• from CFCs destroy it catalytically (net O₃ + O → 2O₂). Water pollutants include pathogens, organic waste, nutrients, metals and pesticides, from point and non-point sources. Excess nutrients cause eutrophication; BOD (5 days, microbes) and COD (2 hours, dichromate) measure the oxygen demand of the waste.

Read the full lesson

Lesson 5

Drinking water standards, soil pollution and green chemistry

Desirable limits for drinking water (BIS, 1991, as given in the textbook)
CharacteristicDesirable limit
pH6.5 to 8.5
Total dissolved solids (TDS)500 ppm
Total hardness (as CaCO₃)300 ppm
Nitrate45 ppm
Chloride250 ppm
Sulphate200 ppm
Fluoride1 ppm
E. coliNone at all
ColiformsNot more than 10 in a 100 mL sample

Traditional and greener choices described in the textbook

  • Traditional
    • Styrene from carcinogenic benzene + ethene, then dehydrogenation over Fe₂O₃/Al₂O₃
    • Dry cleaning with tetrachloroethylene, which pollutes ground water
    • Bleaching paper with chlorine
    • Chlorinated hydrocarbon pesticides
  • Greener
    • Styrene from cheaper, safer xylenes
    • Liquefied CO₂ with a suitable detergent; H₂O₂ for laundry bleaching
    • H₂O₂ with a catalyst
    • Neem-based pesticides

Key takeaways: drinking water should meet limits such as pH 6.5–8.5, TDS 500 ppm, nitrate 45 ppm, fluoride 1 ppm and no E. coli (BIS 1991 values in the textbook); fluoride hardens enamel as fluorapatite but mottles teeth above 2 ppm. Fertilisers, pesticides and industrial wastes pollute soil. Waste management, recycling, cleaner fuels and green chemistry reduce pollution at the source.

Read the full lesson

Privacy · Terms · Refunds · Delivery