- Practice
- About 26 min
- 5 practice questions
Filling orbitals: aufbau, Pauli, Hund and electronic configurations
Apply the aufbau principle, Pauli's exclusion principle and Hund's rule to write electronic configurations and orbital diagrams, and explain the extra stability of half-filled and filled subshells in chromium and copper.
If something looks wrong, please tell us.
By the end of this lesson you can
- State the aufbau principle, Pauli's exclusion principle and Hund's rule of maximum multiplicity.
- Write the electronic configuration and orbital diagram of an atom.
- Write the four quantum numbers of a chosen electron.
- Explain the configurations of chromium and copper using symmetry and exchange energy.
With the energy order of orbitals known, we can place an atom's electrons. Three rules decide where each electron goes, and together they produce the electronic configuration, the distribution of electrons among the orbitals of an atom.
The aufbau principle
Aufbau is German for 'building up'. In the ground state of an atom, orbitals are filled in order of increasing energy: electrons go into the lowest-energy orbital available, and only when it is full do they enter the next one. The order follows the (n + l) rule: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d.
Pauli's exclusion principle
Pauli's principle states that no two electrons in an atom can have the same set of all four quantum numbers. Since mₛ has only two values, one orbital (fixed n, l and mₗ) can hold at most two electrons, with opposite spins. Hydrogen's electron is n = 1, l = 0, mₗ = 0, mₛ = +½; helium's second electron differs only in spin: n = 1, l = 0, mₗ = 0, mₛ = −½.
| Electron | n | l | mₗ | mₛ |
|---|---|---|---|---|
| 1st and 2nd (2s) | 2 | 0 | 0 | +½, −½ |
| 3rd, 4th, 5th (2p, one in each) | 2 | 1 | −1, 0, +1 | +½ each |
| 6th, 7th, 8th (2p, pairing) | 2 | 1 | −1, 0, +1 | −½ each |
Hund's rule of maximum multiplicity
The aufbau principle does not say how to fill degenerate orbitals such as pₓ, p_y and p_z. Hund's rule does: pairing of electrons in degenerate orbitals does not begin until each orbital has one electron, and these single electrons have parallel spins. This keeps electron-electron repulsion low. So pairing starts with the 4th electron in a p subshell, the 6th in a d subshell and the 8th in an f subshell.
Carbon (6 electrons) is 1s² 2s² 2p². The two 2p electrons go into separate orbitals: 2pₓ¹ 2p_y¹ 2p_z⁰, not 2pₓ². Nitrogen, 1s² 2s² 2p³, has one electron in each 2p orbital and three unpaired electrons; oxygen's fourth 2p electron is the first to pair.
Writing an electronic configuration
- Count the electrons Equal to the atomic number for a neutral atom.
- Fill by aufbau Lowest energy orbital first, in (n + l) order.
- At most two per orbital Pauli: opposite spins in a pair.
- Spread out in degenerate orbitals Hund: one each with parallel spins before pairing.
- Check for exceptions Half-filled or filled d subshells, as in Cr and Cu.
Notation
A configuration is written as nlˣ: n is the principal quantum number, l the letter of the subshell (s, p, d, f) and x the number of electrons in it. Hydrogen is 1s¹, read 'one-ess-one'. An orbital diagram shows each orbital as a box with half-arrows (↿ and ⇂) for electrons of opposite spin. Configurations are often shortened with a noble-gas core: sodium is 1s² 2s² 2p⁶ 3s¹ = [Ne] 3s¹.
| Element (Z) | Electronic configuration | Unpaired electrons |
|---|---|---|
| Li (3) | 1s² 2s¹ | 1 |
| B (5) | 1s² 2s² 2p¹ | 1 |
| N (7) | 1s² 2s² 2p³ | 3 |
| O (8) | 1s² 2s² 2p⁴ | 2 |
| Ne (10) | 1s² 2s² 2p⁶ | 0 |
| S (16) | 1s² 2s² 2p⁶ 3s² 3p⁴ | 2 |
| K (19) | [Ar] 4s¹ | 1 |
| Fe (26) | [Ar] 3d⁶ 4s² | 4 |
Worked example 1: iron and the iron(II) ion
Fe has 26 electrons: 1s² 2s² 2p⁶ 3s² 3p⁶ (18, the argon core) then 4s² (20) then 3d⁶ (26). In 3d⁶, Hund's rule puts one electron in each of the five d orbitals and pairs the sixth, leaving 4 unpaired electrons. When iron forms Fe²⁺, the two 4s electrons are removed first (an established fact for d-block cations), giving [Ar] 3d⁶, still with 4 unpaired electrons.
Worked example 2: quantum numbers of a chosen electron
The last (11th) electron of sodium enters 3s: n = 3, l = 0, mₗ = 0, mₛ = +½ (by convention the first electron in an orbital is given +½). The 19th electron of potassium enters 4s: n = 4, l = 0, mₗ = 0, mₛ = +½.
Chromium and copper: two exceptions
By aufbau, chromium (24) should be [Ar] 3d⁴ 4s² and copper (29) [Ar] 3d⁹ 4s². The actual configurations are Cr: [Ar] 3d⁵ 4s¹ and Cu: [Ar] 3d¹⁰ 4s¹: one 4s electron moves into 3d to give a half-filled (d⁵) or completely filled (d¹⁰) subshell. Exactly half-filled and completely filled subshells (p³, p⁶, d⁵, d¹⁰, f⁷, f¹⁴) are extra stable, for two reasons.
- Symmetry: half-filled and filled subshells have a symmetrical distribution of electrons. Electrons in orbitals of different orientation shield each other relatively little, so they are held more strongly by the nucleus.
- Exchange energy: electrons with the same spin in degenerate orbitals can exchange positions, and energy is released each time. The more possible exchanges, the more exchange energy and the more stable the arrangement. For k parallel electrons the number of exchanges is k(k − 1)/2. Exchange energy is also the basis of Hund's rule.
Worked example 3: counting exchanges in chromium
3d⁵: five parallel electrons give 5 × 4/2 = 10 exchanges (4 + 3 + 2 + 1). 3d⁴: four parallel electrons give 4 × 3/2 = 6 exchanges (3 + 2 + 1). The extra exchange energy of d⁵ outweighs the cost of moving an electron from 4s to 3d, so chromium takes 3d⁵ 4s¹.
Key takeaways: fill orbitals in (n + l) order (aufbau), at most two electrons of opposite spin per orbital (Pauli), and singly with parallel spins before pairing in degenerate orbitals (Hund). Write configurations as nlˣ. Half-filled and filled subshells are extra stable because of symmetry and exchange energy, which explains Cr [Ar] 3d⁵ 4s¹ and Cu [Ar] 3d¹⁰ 4s¹.
Check your understanding
-
1. What is the ground-state electronic configuration of copper (Z = 29)?
- [Ar] 3d⁹ 4s²
- [Ar] 3d¹⁰ 4s¹
- [Ar] 3d¹⁰ 4s²
- [Ar] 3d⁸ 4s² 4p¹
Show answer
Answer: B. Copper is an exception: one 4s electron moves into 3d to complete it, giving [Ar] 3d¹⁰ 4s¹ (29 electrons). The fully filled d¹⁰ subshell is extra stable. [Ar] 3d¹⁰ 4s² would have 30 electrons.
-
2. How many unpaired electrons does a ground-state nitrogen atom have?
- 1
- 2
- 0
- 3
Show answer
Answer: D. N is 1s² 2s² 2p³. By Hund's rule the three 2p electrons occupy 2pₓ, 2p_y and 2p_z singly with parallel spins, so there are 3 unpaired electrons.
-
3. What does Hund's rule of maximum multiplicity state?
- Electrons pair up in degenerate orbitals only after each orbital has one electron
- Orbitals are filled in order of increasing energy
- No two electrons can have the same four quantum numbers
- An orbital can hold any number of electrons with the same spin
Show answer
Answer: A. Hund's rule is about degenerate orbitals: they are first singly occupied with parallel spins, and pairing starts only after that. Filling in order of increasing energy is the aufbau principle, and unique sets of four quantum numbers is Pauli's principle.
-
4. How many exchanges are possible among three parallel-spin electrons in a p subshell (p³)?
- 1
- 6
- 3
- 2
Show answer
Answer: C. Number of exchanges = k(k − 1)/2 = 3 × 2/2 = 3 (2 + 1). Six would be the count for four parallel electrons.
-
5. According to Pauli's exclusion principle, how many electrons can one orbital hold?
- Two, with opposite spins
- Two, with the same spin
- Only one
- 2(2l + 1)
Show answer
Answer: A. One orbital fixes n, l and mₗ, so electrons in it can differ only in mₛ (+½ or −½). Hence at most two electrons, with opposite spins. 2(2l + 1) is the capacity of a whole subshell.
Sign in to keep track of the lessons you finish.