• Practice
  • About 22 min
  • 5 practice questions

Electronic configuration, periods, groups and the s, p, d and f blocks

Relate the length of each period to the orbitals being filled, describe the s, p, d and f blocks and their general configurations, and predict an element's period, group and block from its configuration.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why the periods contain 2, 8, 8, 18, 18, 32 and 32 elements.
  • Identify the transition series, lanthanides and actinides.
  • Write the general outer configuration of each block and describe its typical properties.
  • Predict the period, group and block of an element from its electronic configuration.

The modern periodic table is really a map of electronic configurations. The aufbau principle tells us the order in which orbitals fill, and that order decides how many elements each period holds and where each element sits.

Along a period

Each period starts when electrons begin to enter a new shell, ns, and ends when the np orbitals are full. The first period fills only 1s, which holds two electrons, so it has just two elements, hydrogen and helium. The second fills 2s and 2p (2 + 6 = 8 elements, lithium to neon).

Why the periods have different lengths
Period nOrbitals filledNumber of elementsFirst elementLast element
11s2H 1s¹He 1s²
22s, 2p2 + 6 = 8Li 2s¹Ne 2s² 2p⁶
33s, 3p2 + 6 = 8Na 3s¹Ar 3s² 3p⁶
44s, 3d, 4p2 + 10 + 6 = 18K 4s¹Kr 4s² 4p⁶
55s, 4d, 5p2 + 10 + 6 = 18Rb 5s¹Xe 5s² 5p⁶
66s, 4f, 5d, 6p2 + 14 + 10 + 6 = 32Cs 6s¹Rn 6s² 6p⁶
77s, 5f, 6d, 7p2 + 14 + 10 + 6 = 32Fr 7s¹Og 7s² 7p⁶

In period 4 the 3d orbitals fill from scandium to zinc: these ten elements are the first transition series. The 4d, 5d and 6d orbitals give the second, third and fourth transition series. In period 6, filling of the 4f orbitals gives the 14 lanthanides (from cerium, Z = 58, to lutetium, Z = 71, in the textbook's description), and in period 7 the 5f orbitals give the 14 actinides. These two inner-transition series are placed at the foot of the table.

Down a group: the four blocks

Elements in a group have the same outer electronic configuration. Grouping the columns by the orbital that receives the last electron gives four blocks.

The four blocks of the periodic table

  • s-block: groups 1 and 2
    • ns¹ or ns²
    • Alkali and alkaline earth metals
    • Soft, reactive, low ionisation energies, ionic compounds
  • p-block: groups 13 to 18
    • ns² np¹⁻⁶
    • Includes chalcogens (16), halogens (17), noble gases (18)
    • Mostly covalent compounds, several oxidation states
  • d-block: groups 3 to 12
    • (n − 1)d¹⁻¹⁰ ns¹⁻²
    • Transition elements
    • Variable oxidation states, alloys, catalysts
  • f-block: lanthanides and actinides
    • 4f¹⁻¹⁴ 5d⁰⁻¹ 6s² and 5f⁰⁻¹⁴ 6d⁰⁻² 7s²
    • Inner-transition metals
    • Coloured compounds, variable oxidation states

s-block metals are soft with low melting and boiling points and low ionisation enthalpies; they are highly electropositive, form ionic compounds and many give colours to a flame. p-block elements (the representative elements, with the s-block) have higher ionisation energies and large negative electron gain enthalpies; group 18, with full ns² np⁶ shells, are the noble (inert) gases. d-block elements have high melting points, conduct heat and electricity well, show more than one oxidation state and form ionic, covalent and coordination compounds, interstitial compounds and alloys, many of which are catalysts. f-block elements are metals with high melting points, variable oxidation states and mostly coloured compounds.

General outer configurations of the 18 groups (groups 6 and 11 follow chromium and copper)
GroupGeneral outer configurationGroupGeneral outer configuration
1ns¹10(n − 1)d⁸ ns²
2ns²11(n − 1)d¹⁰ ns¹
3(n − 1)d¹ ns²12(n − 1)d¹⁰ ns²
4(n − 1)d² ns²13ns² np¹
5(n − 1)d³ ns²14ns² np²
6(n − 1)d⁵ ns¹15ns² np³
7(n − 1)d⁵ ns²16ns² np⁴
8(n − 1)d⁶ ns²17ns² np⁵
9(n − 1)d⁷ ns²18ns² np⁶

Period = highest principal quantum number n. Group: s-block = number of ns electrons; d-block = ns + (n − 1)d electrons; p-block = 10 + ns + np electrons.

— Locating an element from its configuration

Worked example 1: three elements located

  • 1s² 2s² 2p⁶ 3s² 3p⁴: highest n = 3, so period 3; last electron in p, so p-block; group = 10 + 2 + 4 = 16 (sulphur).
  • [Ar] 3d⁵ 4s¹: n = 4, period 4; last electrons in d, d-block; group = 1 + 5 = 6 (chromium).
  • [Kr] 5s²: n = 5, period 5; s-block; group 2 (strontium).

Worked example 2: an element not yet seen

An element has the outer configuration (n − 1)d¹⁰ ns² np¹ with n = 6. Working: period = 6; p-block; group = 10 + 2 + 1 = 13. It is the element below indium in group 13, thallium (Z = 81).

Key takeaways: a period's length equals the electrons its orbitals can hold: 2, 8, 8, 18, 18, 32, 32. The block is set by the orbital receiving the last electron: s (groups 1-2), p (13-18), d (3-12), f (lanthanides and actinides). Period = outermost n; the group follows from the count of outer electrons.

Check your understanding

  1. 1. An element has the configuration [Ar] 3d¹⁰ 4s² 4p³. Where is it in the periodic table?

    1. Period 3, group 15
    2. Period 4, group 5
    3. Period 4, group 15
    4. Period 4, group 3
    Show answer

    Answer: C. Highest n = 4, so period 4. The last electrons are in 4p, so it is p-block, and group = 10 + 2 + 3 = 15 (arsenic).

  2. 2. How many elements are there in the fifth period?

    1. 8
    2. 18
    3. 32
    4. 2
    Show answer

    Answer: B. Period 5 fills 5s (2), 4d (10) and 5p (6): 2 + 10 + 6 = 18 elements, from rubidium to xenon.

  3. 3. Which orbitals are filled in the lanthanide series?

    1. 5f
    2. 5d
    3. 4d
    4. 4f
    Show answer

    Answer: D. The lanthanides, in period 6, are the series in which the 4f orbitals fill. The 5f orbitals fill in the actinides.

  4. 4. What is the general outer electronic configuration of group 12 elements?

    1. (n − 1)d¹⁰ ns²
    2. (n − 1)d¹⁰ ns¹
    3. ns² np²
    4. (n − 1)d² ns²
    Show answer

    Answer: A. Group 12 (zinc, cadmium, mercury) has a full d subshell and two s electrons: (n − 1)d¹⁰ ns². (n − 1)d¹⁰ ns¹ is group 11.

  5. 5. Which description fits the d-block elements?

    1. They always form only ionic compounds with one fixed valence
    2. They show variable oxidation states and many act as catalysts
    3. They are all gases at room temperature
    4. Their general configuration is ns² np⁶
    Show answer

    Answer: B. Transition elements show more than one oxidation state, form ionic, covalent and coordination compounds, alloys and interstitial compounds, and many of them and their compounds are catalysts. ns² np⁶ describes the noble gases.

Privacy · Terms · Refunds · Delivery