Revision notes

Unit 3 Periodic Classification Of Elements: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Early attempts at classification and Mendeleev's periodic table

Mendeleev's periodic law: the properties of the elements are periodic functions of their atomic weights.

— Mendeleev
Two of Mendeleev's successful predictions
Predicted elementDiscovered asPredicted oxide and chlorideObserved oxide and chloride
Eka-aluminiumGallium (Ga)E₂O₃, ECl₃Ga₂O₃, GaCl₃
Eka-siliconGermanium (Ge)EO₂, ECl₄GeO₂, GeCl₄

From triads to the periodic law

  1. 1817 Döbereiner Triads: middle atomic weight ≈ mean of the other two.
  2. 1862 de Chancourtois Elements on a helix round a cylinder.
  3. 1864 Newlands Law of octaves, valid up to calcium.
  4. 1868-69 Lothar Meyer and Mendeleev Periodic patterns in properties; periodic law and table with gaps.
  5. 1913 Moseley Atomic number, not atomic weight, is the real basis.

Key takeaways: classification began with Lavoisier's four groups and grew through triads, the helix and octaves. Mendeleev's periodic law was based on atomic weight; his gaps and correct predictions of gallium and germanium made his table convincing, but pairs such as Co-Ni and Te-I broke the atomic-weight order. The cure came from Moseley's work on atomic number.

Read the full lesson

Lesson 2

Moseley's work, the modern periodic law and naming new elements

√ν = a(Z − b), where ν is the X-ray frequency and a and b are constants with the same values for all elements.

— Moseley's relation

Mendeleev's table and the modern table

  • Mendeleev's table
    • Based on atomic weight
    • About 70 elements, with gaps
    • Some heavier elements placed before lighter ones
    • No place for isotopes
  • Modern table
    • Based on atomic number
    • 118 elements in 18 groups and 7 periods
    • Order of Z needs no exceptions
    • Isotopes share one place
IUPAC numerical roots
Digit0123456789
Rootnilunbitriquadpenthexseptoctenn
Letternubtqphsoe

Key takeaways: Moseley showed √ν = a(Z − b), making atomic number the true basis of the table. The modern periodic law says properties are periodic functions of atomic number, because outer electron configurations repeat. The long form table has 18 groups and 7 periods. Temporary IUPAC names join digit roots and add -ium.

Read the full lesson

Lesson 3

Electronic configuration, periods, groups and the s, p, d and f blocks

Why the periods have different lengths
Period nOrbitals filledNumber of elementsFirst elementLast element
11s2H 1s¹He 1s²
22s, 2p2 + 6 = 8Li 2s¹Ne 2s² 2p⁶
33s, 3p2 + 6 = 8Na 3s¹Ar 3s² 3p⁶
44s, 3d, 4p2 + 10 + 6 = 18K 4s¹Kr 4s² 4p⁶
55s, 4d, 5p2 + 10 + 6 = 18Rb 5s¹Xe 5s² 5p⁶
66s, 4f, 5d, 6p2 + 14 + 10 + 6 = 32Cs 6s¹Rn 6s² 6p⁶
77s, 5f, 6d, 7p2 + 14 + 10 + 6 = 32Fr 7s¹Og 7s² 7p⁶

The four blocks of the periodic table

  • s-block: groups 1 and 2
    • ns¹ or ns²
    • Alkali and alkaline earth metals
    • Soft, reactive, low ionisation energies, ionic compounds
  • p-block: groups 13 to 18
    • ns² np¹⁻⁶
    • Includes chalcogens (16), halogens (17), noble gases (18)
    • Mostly covalent compounds, several oxidation states
  • d-block: groups 3 to 12
    • (n − 1)d¹⁻¹⁰ ns¹⁻²
    • Transition elements
    • Variable oxidation states, alloys, catalysts
  • f-block: lanthanides and actinides
    • 4f¹⁻¹⁴ 5d⁰⁻¹ 6s² and 5f⁰⁻¹⁴ 6d⁰⁻² 7s²
    • Inner-transition metals
    • Coloured compounds, variable oxidation states
General outer configurations of the 18 groups (groups 6 and 11 follow chromium and copper)
GroupGeneral outer configurationGroupGeneral outer configuration
1ns¹10(n − 1)d⁸ ns²
2ns²11(n − 1)d¹⁰ ns¹
3(n − 1)d¹ ns²12(n − 1)d¹⁰ ns²
4(n − 1)d² ns²13ns² np¹
5(n − 1)d³ ns²14ns² np²
6(n − 1)d⁵ ns¹15ns² np³
7(n − 1)d⁵ ns²16ns² np⁴
8(n − 1)d⁶ ns²17ns² np⁵
9(n − 1)d⁷ ns²18ns² np⁶

Period = highest principal quantum number n. Group: s-block = number of ns electrons; d-block = ns + (n − 1)d electrons; p-block = 10 + ns + np electrons.

— Locating an element from its configuration

Key takeaways: a period's length equals the electrons its orbitals can hold: 2, 8, 8, 18, 18, 32, 32. The block is set by the orbital receiving the last electron: s (groups 1-2), p (13-18), d (3-12), f (lanthanides and actinides). Period = outermost n; the group follows from the count of outer electrons.

Read the full lesson

Lesson 4

Atomic radius, ionic radius and effective nuclear charge

Z_eff = Z − S (Slater). Pauling: d = r₊ + r₋ and r₊/r₋ = Z_eff(anion)/Z_eff(cation).

— Size formulae

Key takeaways: covalent radius = half the bond length between identical atoms; metallic radius = half the distance between neighbouring metal atoms. Z_eff = Z − S from Slater's rules rises across a period, so radii shrink; new shells make radii grow down a group. Pauling's method splits an interionic distance using the ratio of effective nuclear charges.

Read the full lesson

Lesson 5

Ionisation energy, electron affinity, electronegativity and chemical periodicity

Trends in the periodic table

  • Across a period, left to right
    • Atomic radius decreases
    • Ionisation energy increases (exceptions: Be > B, N > O)
    • Electron affinity generally increases
    • Electronegativity increases
  • Down a group
    • Atomic radius increases
    • Ionisation energy decreases
    • Electron affinity generally decreases (but Cl > F, S > O)
    • Electronegativity decreases

Key takeaways: IE rises across a period and falls down a group, with Be > B and N > O because of stable configurations; successive IEs reveal the number of valence electrons. Electron affinity is highest for halogens, with Cl > F. Electronegativity rises across and falls down. Second-period elements are anomalous, diagonal pairs resemble each other, and oxides change from basic on the left to acidic on the right.

Read the full lesson

Privacy · Terms · Refunds · Delivery