• Practice
  • About 16 min
  • 5 practice questions

Earth's internal forces and the layers of the interior

Separate endogenic from exogenic forces, explain diastrophism, and describe the crust, mantle and core with their boundaries and composition.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Distinguish endogenic and exogenic forces and define geomorphic processes and diastrophism.
  • Describe the crust, mantle and core with their composition and approximate depths.
  • Name the boundaries between the layers.

The deepest hole people have ever drilled, the Kola Superdeep Borehole in Russia, reached only about 12.3 km after more than two decades of work, while the earth's radius is about 6,370 km. Almost everything we know about the interior therefore comes from indirect evidence such as earthquake waves. Yet that hidden interior drives the forces that raise mountains, open oceans and shake the ground.

Forces that shape the surface

The earth's surface is reshaped all the time by endogenic forces (from inside the earth) and exogenic forces (acting at the surface). The changes both bring about are together called geomorphic processes. Reshaping of the surface through movement and displacement of rocks is called diastrophism; it includes orogenic (mountain-building) and epeirogenic (continent-building, broad uplift or sinking) processes.

Earth movements

  • Endogenic (internal)
    • Slow movements (diastrophism): orogenic and epeirogenic
    • Sudden movements (catastrophism): earthquakes and volcanoes
  • Exogenic (external)
    • Weathering: physical, chemical, biological
    • Erosion by rivers, glaciers, wind, waves and groundwater

The lithosphere is the outer rigid rocky shell of the earth, made of the crust and the upper part of the mantle. The word comes from Greek lithos (rock) and sphaira (sphere); the textbook credits the American geologist Joseph Barrell with introducing the term. According to the textbook, temperature rises by about 1 °C for every 32 metres of depth near the surface.

The crust

The crust is the thin outer layer. The textbook divides it into an upper crust of silica and aluminium (sial), which forms the continents, and a lower crust of silica and magnesium (sima), which also forms the ocean floor. The boundary between them is the Conrad discontinuity (spelt 'Conorod boundary' in the textbook). Oceanic crust is thinner, about 5 km on average, while continental crust averages about 30 km and reaches about 70 km under the Himalaya. The textbook gives the crust's density as less than 2.7 g/cm³.

The mantle

The mantle, made of silica, magnesium and iron, lies between the crust and the outer core and extends to about 2,900 km depth. It is divided into upper and lower mantle and is generally solid. The weak, partly plastic zone in the upper mantle is the asthenosphere (Greek asthenes, weak), which the textbook says extends to about 400 km and is the main source of magma. The boundary between crust and mantle is the Mohorovičić discontinuity (Moho). The textbook gives the mantle's density as about 3.9 g/cm³.

The core

The core stretches from about 2,900 km to 6,370 km below the surface. It is made mostly of nickel and iron, hence the name NiFe, and is also called the barysphere. Its temperature, according to the textbook, is about 5,500-6,000 °C, and its density about 13.0 g/cm³. The outer core is liquid; the inner core is solid because the enormous pressure at the centre keeps the metal solid despite the heat. The boundary between mantle and outer core is the Gutenberg discontinuity, and between outer and inner core the Lehmann discontinuity.

Layers of the earth and their boundaries
LayerApproximate depthMain materialsState
Crust0 to about 5 km (ocean) or about 30-70 km (continents)Sial above, sima belowSolid
Mantleto about 2,900 kmSilica, magnesium, ironMostly solid; asthenosphere partly plastic
Outer coreabout 2,900 to 5,150 kmNickel, ironLiquid
Inner coreabout 5,150 to 6,370 kmNickel, ironSolid

Boundaries from the top: Conrad (upper/lower crust), Moho (crust/mantle), Gutenberg (mantle/core), Lehmann (outer/inner core).

Worked example 1: temperature at depth

Using the textbook's rate of 1 °C per 32 m, how much warmer is the rock at the bottom of a 3.2 km deep mine than at the surface? Step 1: 3.2 km = 3,200 m. Step 2: 3,200 ÷ 32 = 100. Answer: about 100 °C warmer. (Real gradients vary from place to place, and the rate falls off at greater depth.)

Worked example 2: naming the boundary

An earthquake wave changes speed sharply at about 2,900 km depth. Which boundary is this, and what lies on each side? Reasoning: 2,900 km is the base of the mantle. Answer: the Gutenberg discontinuity, with the solid mantle above and the liquid outer core below.

Key takeaways: endogenic forces work from inside, exogenic forces at the surface; diastrophism covers orogenic and epeirogenic movements; the interior has crust, mantle, outer core and inner core; the Conrad, Moho, Gutenberg and Lehmann discontinuities separate them; the outer core is liquid, the inner core solid.

Check your understanding

  1. 1. The boundary between the earth's crust and mantle is the:

    1. Gutenberg discontinuity
    2. Mohorovičić discontinuity
    3. Lehmann discontinuity
    4. Conrad discontinuity
    Show answer

    Answer: B. The Moho separates crust and mantle. Gutenberg separates mantle and outer core, Lehmann the outer and inner core, and Conrad the upper and lower crust.

  2. 2. Which part of the earth's interior is liquid?

    1. Inner core
    2. Lower mantle
    3. Outer core
    4. Upper crust
    Show answer

    Answer: C. The outer core is liquid nickel-iron. The inner core is solid because of the immense pressure at the centre.

  3. 3. Sial is made mainly of:

    1. silica and aluminium
    2. silica and magnesium
    3. nickel and iron
    4. iron and magnesium
    Show answer

    Answer: A. Sial = silicon + aluminium, the lighter continental crust. Sima is silica and magnesium; NiFe is nickel and iron.

  4. 4. Mountain building by earth movements is called:

    1. epeirogeny
    2. weathering
    3. catastrophism
    4. orogeny
    Show answer

    Answer: D. Orogenic processes build mountains; epeirogenic processes build or uplift continents broadly. Weathering is exogenic.

  5. 5. The weak upper part of the mantle that is the main source of magma is the:

    1. barysphere
    2. asthenosphere
    3. lithosphere
    4. sima layer
    Show answer

    Answer: B. Asthenes means weak; the asthenosphere is partly plastic and supplies magma. The lithosphere is the rigid shell above it.

Privacy · Terms · Refunds · Delivery