- Practice
- About 17 min
- 5 practice questions
Rock-cut art: Ellora, Ajanta and Mamallapuram
Describe the Buddhist, Jain and Hindu caves of Ellora including the Kailasanatha, the chaityas, viharas and painting technique of Ajanta, and the Pallava caves, rathas, Shore Temple and Descent of the Ganga at Mamallapuram.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the three groups of caves at Ellora and the main features of the Kailasanatha temple.
- Explain how the Ajanta murals were made and what they show.
- Describe Mahendravarman's rock-cut temples and the monuments of Mamallapuram.
The book's second section is about three great sites. Ellora is famous for sculpture and Ajanta for painting; both are in the Aurangabad district of Maharashtra. Mamallapuram is the showpiece of Pallava art. The book dates the Ellora and Ajanta temples between about 500 and 950 CE, though cave-making may have begun two centuries earlier, and says the first cave temple was made for the Ajivikas.
Ellora
Ellora has 34 caves carved in the Charanadri hills, a UNESCO World Heritage Site since 1983. Patrons ranged from the Chalukyas to the Rashtrakutas. The book notes that the heterodox sects (Buddhists and Jains) set the trend for cave temples, and orthodox sects later adopted it to spread their ideas. The early caves are plain; the later ones are elegant, and the book stresses that such work needed real knowledge of geometry, structural engineering and metallurgy.
The cave groups at Ellora (textbook account)
-
Buddhist caves (12)
- Single, double or triple storeyed
- Halls and cells for monks and students; a figure reading at a folding table in cave 6
- Buddha in meditation, preaching and earth-touching postures
- Goddesses such as Tara, Chunda, Mahamayuri and Bhrikuti
-
Jain caves
- Distinct from the others, some incomplete
- Yaksha Matanga, Mahavira, Parsvanatha, Gomatesvara with attendants
- Some well-preserved murals
-
Caves of Vedic religions
- Early ones simple and square
- Kailasanatha (cave 16): a massive monolith cut from a single rock
The Kailasanatha temple represents Kailasa, the abode of Shiva. Its lower storey has life-size elephants that seem to carry the temple; the exterior has carved windows, deities and mithuna figures, with mostly Shaiva deities to the left of the entrance and Vaishnava deities to the right. The courtyard has two great pillars with a flagstaff and a Nandi mandapa. Famous panels show the marriage of Shiva and Parvati, Ravana trying to lift Mount Kailasa, and Durga destroying Mahishasura, and the river goddesses Ganga on a crocodile and Yamuna on a tortoise. Of the five Ellora caves with murals, only in the Kailasa temple are they well preserved.
Ajanta
Ajanta, about 100 km north of Aurangabad, has 30 caves cut into volcanic rock. The Hinayana Buddhists began them; inscriptions name patrons from kings to merchants. The book places the first phase in c. 200 BCE-200 CE (paintings of this phase are mostly in caves 9 and 10, of the Satavahana period) and a second phase from c. 200 CE (many historians date the main later phase to the fifth century CE).
How an Ajanta mural was made (textbook account)
- Rough rock surface Ridged volcanic rock.
- First plaster Vegetable fibre, paddy husk, rock grit and sand.
- Thin lime layer Ready to take pigment; cloth was sometimes laid in as reinforcement.
- Natural colours Black, red, white, yellow, blue and green from minerals and natural objects.
The paintings show Jataka stories and episodes from the Buddha's life, with celestial kinnaras, vidyadharas and gandharvas; later paintings give the Bodhisattva a larger place. Garlands, necklaces, headgear, ear-rings and graceful hand movements stand out; compassion and peace are the dominant moods; light and shade are used skilfully; and figures in different skin colours have been read as people of different ethnic groups. Architecturally the caves are chaityas (long, vault-roofed halls with a Buddha at the far end) and viharas (monasteries); sculptures include Yakshis, Hariti with children and Avalokitesvara.
Pallava rock-cut temples and Mamallapuram
Mahendravarman I introduced rock-cut temples to the Pallava country. His Mandagappattu inscription boasts that his shrine to Brahma, Isvara and Vishnu was made without brick, timber, metal or mortar. His temples are usually of the mandapa type: a pillared hall in front and a small shrine behind or at the sides.
At Mamallapuram (Mahabalipuram), the five monolithic rathas are called the Panchapandava Rathas; such monolithic vimanas are peculiar to Mamallapuram. The Dharmaraja Ratha, the finest, has a three-storeyed vimana on a square base; the Bhima Ratha is rectangular, with Harihara, Brahma, Vishnu, Skanda, Ardhanarisvara and Gangadhara; the Arjuna Ratha has Shiva, Vishnu, mithunas and dvarapalas. The Shore Temple, built under Rajasimha (700-728 CE), has three shrines, the main ones to Shiva and Vishnu, and is one of the earliest important structural temples of south India. The greatest carving is the Descent of the Ganga (also called Bhagiratha's or Arjuna's Penance), which blends Puranic figures with local stories and human and animal life; the Krishna mandapa panel of cowherds and cows is another masterpiece.
The book concludes that Deccan sculpture is close to Gupta art and that Pallava sculpture owed much to the Buddhist tradition, yet both have an originality of their own: they took older forms and made something distinctly regional.
Ellora - sculpture (34 caves; Kailasanatha monolith). Ajanta - painting (30 caves; Jatakas, Buddha's life). Mamallapuram - rathas, Shore Temple (Rajasimha), Descent of the Ganga.
Worked example 1: carving versus building
Question: Why is a monolith like the Kailasanatha harder to make than a built temple? Working: (1) A built temple adds stone to stone, so a mistake can be corrected by replacing a block. (2) A monolith is made by removing rock from the top downwards; anything cut away cannot be put back. (3) The whole design, including inner rooms and the elephants below, had to be planned before cutting began. Answer: it demands complete advance planning and precision, which is why the book links it to knowledge of geometry and engineering.
Worked example 2: rock-cut or structural?
Question: Classify (a) the Dharmaraja Ratha, (b) the Shore Temple, (c) a Mahendravarman mandapa cave. Working: (a) the rathas are each cut from one rock: rock-cut monolith. (b) The Shore Temple is assembled from cut stone blocks: structural. (c) A mandapa cave is hollowed into a hillside: rock-cut cave. Answer: monolith, structural, cave, three stages that show Pallava builders moving from carving rock to building in stone.
Key takeaways: Ellora's 34 caves include Buddhist, Jain and Vedic groups, with the monolithic Kailasanatha as the climax. Ajanta's 30 caves, begun by Hinayana Buddhists, hold chaityas, viharas and murals painted on layered plaster with natural colours, showing the Jatakas and the Buddha's life. Mahendravarman I introduced rock-cut mandapa temples; Mamallapuram has the five rathas, the structural Shore Temple of Rajasimha and the Descent of the Ganga. Southern art drew on Gupta and Buddhist traditions but was original.
Check your understanding
-
1. Which Ellora cave is the massive monolithic Kailasanatha temple?
- Cave 6
- Cave 10
- Cave 12
- Cave 16
Show answer
Answer: D. The book identifies the Kailasanatha as cave 16, carved out of a single solid rock to represent Kailasa, Shiva's abode.
-
2. Ajanta is chiefly famous for its:
- mural paintings
- bronze images
- structural temples
- Jain caves
Show answer
Answer: A. The book says Ellora is famous for sculptures and Ajanta for paintings, though Ajanta also has some sculpture.
-
3. Mahendravarman I's Mandagappattu inscription claims that his shrine was made:
- entirely of brick and timber
- without brick, timber, metal or mortar
- by Chalukya craftsmen
- as a copy of Ajanta
Show answer
Answer: B. He boasts that his shrine to Brahma, Isvara and Vishnu was made without traditional materials such as brick, timber, metal and mortar, because it was cut into rock.
-
4. In whose reign was the Shore Temple at Mamallapuram built?
- Mahendravarman I
- Narasimhavarman I
- Rajasimha
- Aparajita
Show answer
Answer: C. The book dates the Shore Temple to the reign of Rajasimha (700-728 CE).
-
5. Which is NOT part of the Ajanta painting technique described in the textbook?
- A plaster of vegetable fibre, husk, grit and sand
- A thin coat of lime to receive the pigment
- Colours from natural objects and minerals
- Gold leaf pressed onto wet clay tablets
Show answer
Answer: D. The book describes plaster, a thin lime layer and natural colours (with cloth sometimes used for reinforcement). Gold leaf on clay tablets is not mentioned.
Sign in to keep track of the lessons you finish.