• Practice
  • About 18 min
  • 5 practice questions

Limit theorems and evaluating limits algebraically

Use the limit theorems for polynomials, sums, products, quotients and powers, remove a 0/0 form by factorising or rationalising, and apply lim (x→a) (xⁿ − aⁿ)/(x − a) = naⁿ⁻¹.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Find limits of polynomials by substitution.
  • Use the algebra of limits for sums, differences, products, quotients and powers.
  • Recognise the form 0/0 and remove it by factorising or rationalising.
  • Use the standard result lim (x→a) (xⁿ − aⁿ)/(x − a) = naⁿ⁻¹.

Tables and graphs build intuition, but they are slow and can mislead. The limit theorems let us evaluate limits mechanically. Their proofs are beyond the level of the textbook, so here we learn to use them correctly, and to spot when they cannot be used directly.

Polynomials and the algebra of limits

Theorem 9.1. If P(x) = a₀ + a₁x + ... + aₙxⁿ is a polynomial, then lim (x→x₀) P(x) = P(x₀). In particular, the limit of a constant function is that constant, and lim (x→x₀) x = x₀.

Theorem 9.2. Suppose lim (x→x₀) f(x) and lim (x→x₀) g(x) both exist and c is a constant. Then:

RuleStatement
Constant multiplelim c·f(x) = c·lim f(x)
Sum and differencelim [f(x) ± g(x)] = lim f(x) ± lim g(x)
Productlim [f(x)g(x)] = lim f(x) · lim g(x)
Quotientlim f(x)/g(x) = lim f(x) / lim g(x), provided lim g(x) ≠ 0
Power (Theorem 9.3)lim [f(x)]ⁿ = [lim f(x)]ⁿ

These extend to any finite number of functions. Caution: do not use the quotient rule when the limit of the denominator is 0. If the numerator also tends to 0, the form is 0/0, and it must be simplified first.

Worked example 1: direct use of the theorems

(i) lim (x→2) (x³ − 2x + 5) = 8 − 4 + 5 = 9. (ii) lim (x→−1) (x² + 4)³ = [lim (x→−1) (x² + 4)]³ = 5³ = 125. (iii) lim (x→2) (x² + 3x)/(x + 3): the denominator tends to 5 ≠ 0, so the limit is (4 + 6)/5 = 2.

Removing the form 0/0

If substituting x = a gives 0/0, then for a polynomial top and bottom (x − a) is a factor of both: factorise and cancel it (allowed, since x ≠ a while x approaches a). If square roots are involved, multiply top and bottom by the conjugate to rationalise.

Evaluating lim (x→a) f(x)/g(x)

  1. Substitute x = a If the denominator is not 0, the answer is f(a)/g(a).
  2. Got 0/0? The expression must be simplified first.
  3. Factorise or rationalise Cancel the factor (x − a), or multiply by the conjugate.
  4. Substitute again Repeat if 0/0 appears once more.

Worked example 2: factorising

Evaluate lim (x→3) (x² − 5x + 6)/(x² − 9). Substituting gives (9 − 15 + 6)/(9 − 9) = 0/0. Factorise: x² − 5x + 6 = (x − 2)(x − 3) and x² − 9 = (x − 3)(x + 3). Cancelling (x − 3): lim (x→3) (x − 2)/(x + 3) = 1/6. So the limit is 1/6.

Worked example 3: rationalising

Evaluate lim (x→0) (√(x + 4) − 2)/x. Substituting gives 0/0. Multiply top and bottom by √(x + 4) + 2: the numerator becomes (x + 4) − 4 = x, so the expression is x/[x(√(x + 4) + 2)] = 1/(√(x + 4) + 2). Now substitute: 1/(2 + 2) = 1/4.

A standard limit

Theorem 9.4. lim (x→a) (xⁿ − aⁿ)/(x − a) = naⁿ⁻¹. For a positive integer n: xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + xⁿ⁻²a + ... + xaⁿ⁻² + aⁿ⁻¹). Cancel (x − a) and let x → a: each of the n terms tends to aⁿ⁻¹, so the sum tends to naⁿ⁻¹. The textbook notes that the result also holds for any rational n.

Worked example 4: using naⁿ⁻¹

(i) lim (x→2) (x⁵ − 32)/(x − 2) = lim (x→2) (x⁵ − 2⁵)/(x − 2) = 5·2⁴ = 80. (ii) lim (x→4) (√x − 2)/(x − 4) uses n = 1/2, a = 4: (1/2)·4^(−1/2) = (1/2)(1/2) = 1/4. Check by rationalising: (√x − 2)/(x − 4) = 1/(√x + 2), which tends to 1/4. (iii) lim (x→1) (x⁴ − 1)/(x³ − 1): divide top and bottom by (x − 1); the top tends to 4·1³ = 4 and the bottom to 3·1² = 3, so the limit is 4/3. (iv) If lim (x→2) (xⁿ − 2ⁿ)/(x − 2) = 80 for a positive integer n, then n·2ⁿ⁻¹ = 80; trying values, 5·2⁴ = 80, so n = 5.

Substitute first. 0/0 means simplify: factorise, rationalise or use lim (x→a) (xⁿ − aⁿ)/(x − a) = naⁿ⁻¹. Never use the quotient rule when the denominator tends to 0.

— Evaluating limits

Key takeaways: polynomials are evaluated by substitution; limits respect sums, products, quotients (non-zero denominator) and powers; a 0/0 form hides a common factor that factorising or rationalising removes; and (xⁿ − aⁿ)/(x − a) tends to naⁿ⁻¹.

Check your understanding

  1. 1. What is lim (x→1) (x² + 2x − 3)/(x − 1)?

    1. 0
    2. 2
    3. 4
    4. Does not exist
    Show answer

    Answer: C. Substitution gives 0/0. x² + 2x − 3 = (x − 1)(x + 3), so after cancelling, the limit is lim (x→1) (x + 3) = 4.

  2. 2. What is lim (x→0) (√(1 + x) − 1)/x?

    1. 1/2
    2. 1
    3. 0
    4. 2
    Show answer

    Answer: A. Multiply by the conjugate √(1 + x) + 1: the numerator becomes (1 + x) − 1 = x, so the expression is 1/(√(1 + x) + 1), which tends to 1/2.

  3. 3. What is lim (x→3) (x⁴ − 81)/(x − 3)?

    1. 27
    2. 81
    3. 4
    4. 108
    Show answer

    Answer: D. 81 = 3⁴, so this is lim (x→3) (x⁴ − 3⁴)/(x − 3) = 4·3³ = 4 × 27 = 108.

  4. 4. Why can the quotient rule not be applied directly to lim (x→2) (x² − 4)/(x − 2)?

    1. Because the numerator is a polynomial
    2. Because the limit of the denominator is 0
    3. Because the function is not defined for x > 2
    4. Because the limit is infinite
    Show answer

    Answer: B. The quotient rule needs lim g(x) ≠ 0, but x − 2 → 0. Factorising first gives x + 2, so the limit is 4.

  5. 5. What is lim (x→−1) (x³ + 1)/(x + 1)?

    1. 0
    2. −3
    3. 1
    4. 3
    Show answer

    Answer: D. x³ + 1 = x³ − (−1)³, so the limit is 3(−1)² = 3. Directly: x³ + 1 = (x + 1)(x² − x + 1), and x² − x + 1 → 1 + 1 + 1 = 3.

Privacy · Terms · Refunds · Delivery