• Practice
  • About 16 min
  • 5 practice questions

The idea of a limit and one-sided limits

Estimate a limit from a table or graph, find left-hand and right-hand limits, and decide whether the limit of a function exists at a point.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain in words what lim (x→x₀) f(x) = L means.
  • Estimate a limit from a table of values or a graph.
  • Find the left-hand limit f(x₀⁻) and the right-hand limit f(x₀⁺).
  • Decide whether a limit exists, including for |x|/x and the greatest integer function.

Calculus is the mathematics of change: the speed of an accelerating car, the slope of a curve, the area under a graph. The Tamil Nadu textbook describes calculus as a 'limit machine': start with an idea from earlier mathematics, such as the slope of a line, pass it through a limit process, and a new calculus idea comes out. The textbook credits Newton and Leibnitz with creating calculus, Cauchy with the first reasonably clear definition of a limit and Weierstrass with the precise one. This lesson builds the intuitive idea of a limit.

Approaching a point from both sides

Take f(x) = 2x + 1 and watch it as x moves towards 3. From the left: f(2.9) = 6.8, f(2.99) = 6.98, f(2.999) = 6.998. From the right: f(3.1) = 7.2, f(3.01) = 7.02, f(3.001) = 7.002. From both sides the values close in on 7, and we write lim (x→3) (2x + 1) = 7. Here f(3) happens to be 7 as well, but the limit is about values near 3, not at 3.

Definition 9.1 (intuitive). Let f be defined on an open interval containing x₀, except possibly at x₀. We say lim (x→x₀) f(x) = L if f(x) gets as close to L as we like whenever x is sufficiently close to x₀ from either side, with x ≠ x₀.

Worked example 1: a function with a hole

Let f(x) = (x² − 9)/(x − 3). Its domain is R − {3}, so f(3) is not defined. For x ≠ 3, f(x) = (x − 3)(x + 3)/(x − 3) = x + 3. A table agrees: f(2.99) = 5.99 and f(3.01) = 6.01. So lim (x→3) f(x) = 6. The graph is the line y = x + 3 with a hole at (3, 6). Whether f is defined at x₀ has no bearing on whether the limit exists.

One-sided limits

The left-hand limit lim (x→x₀⁻) f(x) = l₁ means f(x) can be made as close to l₁ as we like by taking x close to x₀ and less than x₀. The right-hand limit lim (x→x₀⁺) f(x) = l₂ uses x greater than x₀. They are also written f(x₀⁻) and f(x₀⁺); for h > 0 they can be found as lim (h→0) f(x₀ − h) and lim (h→0) f(x₀ + h). Do not confuse f(x₀⁻) and f(x₀⁺), the limiting values, with f(x₀), the value at the point.

lim (x→x₀) f(x) = L exists exactly when both one-sided limits exist and f(x₀⁻) = f(x₀⁺) = L, a unique real number.

— Existence of a limit

Does lim (x→x₀) f(x) exist?

  1. Find the left-hand limit Use the rule of f for x < x₀.
  2. Find the right-hand limit Use the rule of f for x > x₀.
  3. Compare Both must be finite real numbers and equal.
  4. Conclude Equal: the limit is that number. Unequal, missing or infinite: the limit does not exist.

Worked example 2: |x − 2|/(x − 2) at 2

For x > 2, |x − 2| = x − 2, so the function equals 1 and f(2⁺) = 1. For x < 2, |x − 2| = −(x − 2), so the function equals −1 and f(2⁻) = −1. The one-sided limits differ, so lim (x→2) |x − 2|/(x − 2) does not exist. At any other point the limit exists (it is 1 or −1).

Worked example 3: the greatest integer function

⌊x⌋ is the greatest integer less than or equal to x. Near x = 2: for 1 ≤ x < 2, ⌊x⌋ = 1, so the left-hand limit is 1; for 2 ≤ x < 3, ⌊x⌋ = 2, so the right-hand limit is 2. They differ, so lim (x→2) ⌊x⌋ does not exist. The same happens at every integer n: the left limit is n − 1 and the right limit is n. At a non-integer such as 2.5 the limit exists and equals 2.

Worked example 4: piecewise functions

(i) f(x) = x² for x < 1 and 3x − 2 for x ≥ 1. f(1⁻) = 1² = 1 and f(1⁺) = 3 − 2 = 1, so lim (x→1) f(x) = 1. (ii) g(x) = 2x − 1 for x < 3 and x + 1 for x ≥ 3. g(3⁻) = 5 and g(3⁺) = 4, so the limit at 3 does not exist. (iii) √x is not defined for x < 0, so at 0 only the right-hand limit exists (it is 0); following the Tamil Nadu textbook, lim (x→0) √x is then said not to exist.

Key takeaways: a limit describes the values of f near x₀, not at x₀; check from the left and from the right; the limit exists only when both one-sided limits exist and agree; and functions such as |x − a|/(x − a) and ⌊x⌋ fail this test at their break points.

Check your understanding

  1. 1. What is lim (x→−2) (x² − 3x)?

    1. −2
    2. 10
    3. 2
    4. −10
    Show answer

    Answer: B. Values near −2 approach (−2)² − 3(−2) = 4 + 6 = 10. For a polynomial the limit equals the value at the point.

  2. 2. What is lim (x→5) (x² − 25)/(x − 5)?

    1. Does not exist, since f(5) is undefined
    2. 0
    3. 5
    4. 10
    Show answer

    Answer: D. For x ≠ 5, (x² − 25)/(x − 5) = x + 5, which approaches 10. The function is undefined at 5, but that does not stop the limit from existing.

  3. 3. For f(x) = ⌊x⌋, what are f(4⁻) and f(4⁺)?

    1. 3 and 4
    2. 4 and 4
    3. 4 and 5
    4. 3 and 5
    Show answer

    Answer: A. Just below 4, for 3 ≤ x < 4, ⌊x⌋ = 3. Just above, for 4 ≤ x < 5, ⌊x⌋ = 4. So f(4⁻) = 3 and f(4⁺) = 4, and the limit at 4 does not exist.

  4. 4. f(x) = x + 4 for x < 1 and kx for x ≥ 1. For which k does lim (x→1) f(x) exist?

    1. 4
    2. 1
    3. 5
    4. 3
    Show answer

    Answer: C. f(1⁻) = 1 + 4 = 5 and f(1⁺) = k. The limit exists when they are equal, so k = 5.

  5. 5. If f(2) = 4, which statement is correct?

    1. lim (x→2) f(x) must be 4
    2. lim (x→2) f(x) must exist
    3. Nothing can be said about lim (x→2) f(x) from this alone
    4. lim (x→2) f(x) cannot be 4
    Show answer

    Answer: C. The limit depends on values near 2, not at 2. The limit could be 4, could be another number, or might not exist (for example if f jumps at 2).

Privacy · Terms · Refunds · Delivery