Revision notes

Chapter 9 Differential Calculus - Limits and Continuity: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The idea of a limit and one-sided limits

lim (x→x₀) f(x) = L exists exactly when both one-sided limits exist and f(x₀⁻) = f(x₀⁺) = L, a unique real number.

— Existence of a limit

Does lim (x→x₀) f(x) exist?

  1. Find the left-hand limit Use the rule of f for x < x₀.
  2. Find the right-hand limit Use the rule of f for x > x₀.
  3. Compare Both must be finite real numbers and equal.
  4. Conclude Equal: the limit is that number. Unequal, missing or infinite: the limit does not exist.

Key takeaways: a limit describes the values of f near x₀, not at x₀; check from the left and from the right; the limit exists only when both one-sided limits exist and agree; and functions such as |x − a|/(x − a) and ⌊x⌋ fail this test at their break points.

Read the full lesson

Lesson 2

Limit theorems and evaluating limits algebraically

RuleStatement
Constant multiplelim c·f(x) = c·lim f(x)
Sum and differencelim [f(x) ± g(x)] = lim f(x) ± lim g(x)
Productlim [f(x)g(x)] = lim f(x) · lim g(x)
Quotientlim f(x)/g(x) = lim f(x) / lim g(x), provided lim g(x) ≠ 0
Power (Theorem 9.3)lim [f(x)]ⁿ = [lim f(x)]ⁿ

Evaluating lim (x→a) f(x)/g(x)

  1. Substitute x = a If the denominator is not 0, the answer is f(a)/g(a).
  2. Got 0/0? The expression must be simplified first.
  3. Factorise or rationalise Cancel the factor (x − a), or multiply by the conjugate.
  4. Substitute again Repeat if 0/0 appears once more.

Substitute first. 0/0 means simplify: factorise, rationalise or use lim (x→a) (xⁿ − aⁿ)/(x − a) = naⁿ⁻¹. Never use the quotient rule when the denominator tends to 0.

— Evaluating limits

Key takeaways: polynomials are evaluated by substitution; limits respect sums, products, quotients (non-zero denominator) and powers; a 0/0 form hides a common factor that factorising or rationalising removes; and (xⁿ − aⁿ)/(x − a) tends to naⁿ⁻¹.

Read the full lesson

Lesson 3

Infinite limits, limits at infinity and asymptotes

Limits of rational functions p(x)/q(x) as x → ±∞
DegreesLimit
deg p < deg q0
deg p = deg q(leading coefficient of p) / (leading coefficient of q)
deg p > deg qf(x) → ∞ or −∞: the limit does not exist

Two kinds of asymptote

  • Vertical asymptote x = x₀
    • x tends to a finite x₀
    • f(x) tends to ∞ or −∞
    • Look where a denominator is 0
    • The limit does not exist
  • Horizontal asymptote y = l
    • x tends to ∞ or −∞
    • f(x) tends to a finite l
    • Compare degrees, or divide by the top power
    • The limit exists and equals l

∞ is not a number: f(x) → ∞ means the limit does not exist. For x → ±∞, divide by the highest power of x in the denominator.

— Infinity in limits

Key takeaways: a denominator tending to 0 with a non-zero numerator gives an infinite limit and a vertical asymptote; limits at infinity of rational functions follow the degree rule; and a finite limit at ±∞ gives a horizontal asymptote.

Read the full lesson

Lesson 4

The sandwich theorem and standard limits

ResultLimit
9.2lim (x→0) (eˣ − 1)/x = 1
9.3lim (x→0) (aˣ − 1)/x = log a, a > 0
9.4lim (x→0) log(1 + x)/x = 1
9.5, 9.6lim (x→0) sin⁻¹x/x = 1; lim (x→0) tan⁻¹x/x = 1
9.7lim (x→∞) (1 + 1/x)ˣ = e
9.8lim (x→0) (1 + x)^(1/x) = e
9.9lim (x→∞) (1 + k/x)ˣ = eᵏ

Which standard limit fits?

  • Trigonometric, x → 0
    • Make the angle match: sin(kx)/(kx) → 1
    • 1 − cos: use 2 sin²(x/2)
    • tan kx/x → k
  • Exponential or log, x → 0
    • (e^(kx) − 1)/x → k
    • (aˣ − 1)/x → log a
    • log(1 + kx)/x → k
  • Form 1^∞
    • Write as (1 + small)^(large)
    • (1 + k/x)ˣ → eᵏ
    • (1 + kx)^(1/x) → eᵏ

lim (θ→0) sin θ/θ = 1 (θ in radians); lim (x→0) (eˣ − 1)/x = 1; lim (x→0) (aˣ − 1)/x = log a; lim (x→0) log(1 + x)/x = 1; lim (x→∞) (1 + k/x)ˣ = eᵏ.

— Standard limits

Key takeaways: squeeze a function you cannot handle between two you can; adjust each expression so the standard limit appears exactly (the same quantity inside and below); and remember that sin θ/θ → 1 needs radians.

Read the full lesson

Lesson 5

Continuity and types of discontinuity

How continuity at x₀ can fail

  • f(x₀) not defined
    • (x² − 9)/(x − 3) at x = 3
    • 1/x at x = 0
  • lim (x→x₀) f(x) does not exist
    • One-sided limits differ: ⌊x⌋ at integers
    • f(x) → ∞: 1/x² at 0
  • Limit exists but is not f(x₀)
    • A single point moved off the curve
    • Fixed by redefining f(x₀)

f is continuous at x₀ when f(x₀) exists, lim (x→x₀) f(x) exists and the two are equal. Limit exists but ≠ f(x₀) or f(x₀) undefined: removable. Finite one-sided limits that differ: jump.

— Continuity

Key takeaways: continuity at a point is three checks; polynomials, rational functions (away from zeros of the denominator), trigonometric, exponential, logarithmic and root functions are continuous on their domains; sums, products, quotients and composites keep continuity; and discontinuities are removable or jumps depending on whether the limit exists.

Read the full lesson

Privacy · Terms · Refunds · Delivery