Revision notes

Unit 1 Nature of Physical World and Measurement: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Science, physics, physical quantities and the SI system of units

Steps of the scientific method

  1. Systematic observation Notice a pattern, for example that the far end of a heated rod becomes warm.
  2. Controlled experiment Change one factor at a time, such as the material or the length of the rod.
  3. Qualitative and quantitative reasoning Ask why and how much; record numbers, not only impressions.
  4. Mathematical model Write the relation as an equation.
  5. Prediction and test Predict a new result; a failed prediction falsifies or corrects the theory.

Physics

  • Classical physics Developed before the 20th century.
    • Mechanics: statics, kinematics, dynamics
    • Thermodynamics and kinetic theory
    • Optics
    • Electricity and magnetism
    • Acoustics
    • Astrophysics
    • Relativity
  • Modern physics Developed from the 20th century onwards.
    • Quantum mechanics
    • Atomic physics
    • Nuclear physics
    • Condensed matter physics
    • High energy (particle) physics
Grouping of branches as used in the Tamil Nadu textbook.
The seven SI base quantities and units
Base quantitySI unitSymbol
Lengthmetrem
Masskilogramkg
Timeseconds
Electric currentampereA
TemperaturekelvinK
Amount of substancemolemol
Luminous intensitycandelacd
Some derived quantities
Derived quantityExpressionSI unit
Velocitydisplacement / timem s⁻¹
Accelerationvelocity / timem s⁻²
Forcemass × accelerationkg m s⁻² = N
Pressureforce / areaN m⁻² = Pa
Work, energyforce × distanceN m = J
Powerwork / timeJ s⁻¹ = W
Momentummass × velocitykg m s⁻¹
Electric chargecurrent × timeA s = C

θ (rad) = arc length / radius; Ω (sr) = area / radius²; π rad = 180°; 1″ ≈ 4.85 × 10⁻⁶ rad

Common prefixes (deca 10¹, hecto 10², deci 10⁻¹ and centi 10⁻² are also used)
PowerPrefixSymbolPowerPrefixSymbol
10³kilok10⁻³millim
10⁶megaM10⁻⁶microµ
10⁹gigaG10⁻⁹nanon
10¹²teraT10⁻¹²picop
10¹⁵petaP10⁻¹⁵femtof
10¹⁸exaE10⁻¹⁸attoa
  • Physics studies nature through unification and reductionism, using the scientific method.
  • There are seven base quantities; all others are derived from them.
  • SI is rational, coherent and metric; its base units are m, kg, s, A, K, mol and cd.
  • Angles in radians are arc/radius; solid angles in steradians are area/radius².
  • Prefixes are powers of ten: k = 10³, M = 10⁶, µ = 10⁻⁶, n = 10⁻⁹.
Read the full lesson

Lesson 2

Measuring length, mass and time: from screw gauge to RADAR

Finding a distance by parallax

  1. Choose two far-apart observing points Their separation is the basis b.
  2. Measure the parallax angle Find θ against distant stars and convert it to radians.
  3. Use the arc approximation θ = b/x because b is very small compared with x.
  4. Calculate the distance x = b/θ.

Triangulation: h = x tan θ. Parallax: x = b/θ (θ in radians). RADAR: d = vt/2.

Practical units of length
UnitValue in metres
1 fermi (fm)10⁻¹⁵ m
1 angstrom (Å)10⁻¹⁰ m
1 nanometre (nm)10⁻⁹ m
1 micron (µm)10⁻⁶ m
1 astronomical unit (AU), mean Earth-Sun distance1.496 × 10¹¹ m
1 light year (distance light travels in vacuum in one year)about 9.46 × 10¹⁵ m
1 parsec (distance at which 1 AU subtends 1″)about 3.08 × 10¹⁶ m = 3.26 light year
  • Screw gauge LC = pitch/number of head divisions; vernier LC = 1 MSD − 1 VSD.
  • Corrected reading = observed reading − zero error (with sign).
  • Large distances: triangulation h = x tan θ, parallax x = b/θ, RADAR d = vt/2.
  • 1 AU = 1.496 × 10¹¹ m; 1 light year ≈ 9.46 × 10¹⁵ m; 1 parsec ≈ 3.26 light year.
  • Large masses are found by gravitational methods, atomic masses by a mass spectrograph; the atomic clock is the time standard.
Read the full lesson

Lesson 3

Accuracy, precision and the theory of errors

Target-shooting picture of accuracy and precision

  • Not accurate, not precise
    • Hits scattered widely
    • Their average is away from the centre
  • Precise, not accurate
    • Hits close together
    • The group is away from the centre
  • Accurate and precise
    • Hits close together
    • The group is at the centre

Errors in measurement

  • Systematic Same direction every time
    • Instrumental
    • Technique or procedure
    • Personal
    • External causes
    • Least count
  • Random Scatter both ways
    • Reduced by averaging many readings
  • Gross Carelessness
    • Avoided only by care and alertness

Result = aₘ ± Δaₘ; relative error = Δaₘ/aₘ; percentage error = (Δaₘ/aₘ) × 100%

Reading (mm)Absolute error |1.42 − aᵢ| (mm)
1.420.00
1.450.03
1.400.02
1.440.02
1.390.03
  • Accuracy = closeness to the true value; precision = closeness of repeated readings or fineness of resolution.
  • Systematic errors are one-directional and are removed by correction or better instruments, not by averaging.
  • Random errors are reduced by averaging many readings; gross errors only by care.
  • Mean absolute error, relative error and percentage error describe how good a result is.
  • Always state a result as (mean ± mean absolute error) with its unit.
Read the full lesson

Lesson 4

Propagation of errors, significant figures and rounding off

Rules for combining errors
OperationResultMaximum error
SumZ = A + BΔZ = ΔA + ΔB
DifferenceZ = A − BΔZ = ΔA + ΔB (errors still add)
ProductZ = ABΔZ/Z = ΔA/A + ΔB/B
QuotientZ = A/BΔZ/Z = ΔA/A + ΔB/B
PowerZ = AⁿΔZ/Z = n ΔA/A

General rule: if Z = AᵖBᵠ/Cʳ, then ΔZ/Z = p(ΔA/A) + q(ΔB/B) + r(ΔC/C). Errors always add, even when quantities are subtracted or divided.

Counting significant figures (the textbook's rules)
RuleExample
All non-zero digits are significant1342 has 4
Zeros between non-zero digits are significant2008 has 4
Zeros to the right of a non-zero digit but left of a written decimal point are significant30700. has 5
Without a decimal point, trailing zeros are not significant30700 has 3
In a number less than 1, zeros after the decimal point before the first non-zero digit are not significant0.00345 has 3
Zeros to the right of the decimal point after a non-zero digit are significant40.00 has 4; 0.030400 has 5
The count does not depend on units1.53 cm = 0.0153 m: both have 3

Which rule to use

  • Adding or subtracting
    • Count decimal places
    • Keep the fewest decimal places
  • Multiplying or dividing
    • Count significant figures
    • Keep the fewest significant figures
  • Absolute errors add in sums and differences; fractional errors add in products and quotients.
  • A power multiplies the fractional error by the power: for Aⁿ, ΔZ/Z = nΔA/A.
  • Significant figures = reliable digits + the first uncertain digit.
  • An exact 5 being dropped: keep an even previous digit, raise an odd one.
  • Addition and subtraction follow decimal places; multiplication and division follow significant figures.
Read the full lesson

Lesson 5

Dimensional analysis: dimensions, homogeneity and its uses

Some dimensional formulae
QuantityRelationDimensional formula
Velocity, speeddistance / time[LT⁻¹]
Accelerationvelocity / time[LT⁻²]
Momentum, impulsemass × velocity; force × time[MLT⁻¹]
Forcemass × acceleration[MLT⁻²]
Work, energy, torqueforce × distance[ML²T⁻²]
Powerwork / time[ML²T⁻³]
Pressure, stress, elastic modulusforce / area[ML⁻¹T⁻²]
Surface tension, force constantforce / length[MT⁻²]
Frequency, angular velocity1 / time[T⁻¹]
Angular momentum, Planck's constantmomentum × distance; energy / frequency[ML²T⁻¹]
Gravitational constant Gforce × distance² / mass²[M⁻¹L³T⁻²]
Coefficient of viscosityforce / (area × velocity gradient)[ML⁻¹T⁻¹]

Classifying quantities by dimensions

  • Dimensional variables
    • Have dimensions, values vary
    • Length, velocity, acceleration
  • Dimensionless variables
    • No dimensions, values vary
    • Strain, specific gravity, refractive index
  • Dimensional constants
    • Have dimensions, fixed values
    • Gravitational constant G, Planck's constant h
  • Dimensionless constants
    • No dimensions, fixed values
    • π, e, pure numbers

Principle of homogeneity: every term in a physical equation must have the same dimensions. Only quantities of the same dimension can be added, subtracted or equated.

Deriving a relation by dimensions

  1. Assume a power law Q = k Q₁ᵃ Q₂ᵇ Q₃ᶜ with k dimensionless.
  2. Substitute dimensions Write each quantity as M, L and T powers.
  3. Equate powers Match the powers of M, L and T on both sides.
  4. Solve and write the relation Find a, b, c; the constant k comes from experiment.
  • Dimensions are the powers of M, L and T that make up a quantity.
  • Same dimensions do not mean the same quantity (torque and energy).
  • Homogeneity: every term of an equation has the same dimensions.
  • Uses: unit conversion, checking equations, deriving relations.
  • A true equation is always dimensionally correct, but a dimensionally correct equation need not be true.
Read the full lesson

Privacy · Terms · Refunds · Delivery