Revision notes

Unit 8 Heat and Thermodynamics: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Heat, work, temperature, the ideal gas law and thermal expansion

Specific heat capacities at 1 atm and 20 °C (as tabulated in the Tamil Nadu textbook)
Substances (J kg⁻¹ K⁻¹)Substances (J kg⁻¹ K⁻¹)
Lead130Aluminium900
Copper390Air1005
Iron (steel)450Human body3470
Glass840Water4186

PV = NkT = μRT (T in kelvin); ΔQ = msΔT; ΔL/L₀ = α_LΔT, α_A ≈ 2α_L, α_V ≈ 3α_L; water is densest at 4 °C.

  • Heat and work are ways of transferring energy; a body has internal energy, not heat.
  • Temperature decides the direction of heat flow; use kelvin in gas laws.
  • PV = μRT with R = 8.314 J mol⁻¹ K⁻¹; one mole of ideal gas at 0 °C and 1 atm occupies 22.4 L.
  • ΔQ = msΔT; water's large s makes it a good coolant.
  • Area and volume expansion coefficients are about 2 and 3 times the linear one.
Read the full lesson

Lesson 2

Change of state, calorimetry and heat transfer

Conduction, convection and radiation

  • Conduction
    • Through matter in contact
    • No bulk movement of the material
    • Mostly in solids
    • Q/t = KAΔT/L
  • Convection
    • By movement of the fluid itself
    • Only in liquids and gases
    • Convection currents, sea and land breezes
  • Radiation
    • By electromagnetic waves
    • Needs no medium; crosses vacuum
    • Sunlight, warmth from a heater
    • E = σT⁴, λ_m = b/T

Q = mL; T_f = (m₁s₁T₁ + m₂s₂T₂)/(m₁s₁ + m₂s₂); Q/t = KAΔT/L; dQ/dt = −a(T − T_s); E = σT⁴ (σ = 5.67 × 10⁻⁸ W m⁻² K⁻⁴); λ_mT = b (b = 2.898 × 10⁻³ m K).

  • Temperature stays constant during a change of state; Q = mL.
  • In calorimetry, heat gained equals heat lost (with signs).
  • Conduction needs contact, convection needs a moving fluid, radiation needs no medium.
  • Cooling is fastest when the excess temperature is largest.
  • Radiated power grows as T⁴; the peak wavelength shrinks as 1/T.
Read the full lesson

Lesson 3

Thermodynamic systems, the zeroth and first laws and work done by a gas

Types of thermodynamic system

  • Open
    • Exchanges both matter and energy
    • Example: an open pot of boiling water
  • Closed
    • Exchanges energy but not matter
    • Example: gas in a sealed metal cylinder
  • Isolated
    • Exchanges neither matter nor energy
    • Ideal; approached by a well-insulated closed flask

Zeroth law → temperature. First law: ΔU = Q − W (Q > 0 heat in; W > 0 work by the system). W = ∫P dV = area under the PV curve. dU = μC_v dT; C_p − C_v = R; γ = C_p/C_v.

  • Thermodynamic equilibrium means thermal, mechanical and chemical equilibrium together.
  • P, V, T and U are state variables; Q and W depend on the process.
  • Internal energy is molecular kinetic plus potential energy; for an ideal gas it depends on T only.
  • First law: ΔU = Q − W, with careful signs.
  • Work by a gas is the area under its PV curve; C_p − C_v = R.
Read the full lesson

Lesson 4

Thermodynamic processes: isothermal, adiabatic, isobaric, isochoric and cyclic

Summary of the four processes for an ideal gas
ProcessFixedEquation of stateWork done by gasFirst law
IsothermalTPV = constantμRT ln(V_f/V_i)ΔU = 0, Q = W
AdiabaticQ = 0PV^γ = constantμR(T_i − T_f)/(γ − 1)ΔU = −W
IsobaricPV/T = constantP(V_f − V_i)ΔU = Q − PΔV
IsochoricVP/T = constant0ΔU = Q

Isothermal: PV = const, W = μRT ln(V_f/V_i), Q = W. Adiabatic: PV^γ = const, TV^(γ−1) = const, W = μR(T_i − T_f)/(γ − 1). Isobaric: W = PΔV. Isochoric: W = 0, ΔU = Q. Cycle: ΔU = 0, W = enclosed area (clockwise +).

  • Isothermal: ideal-gas internal energy constant, so heat in equals work out.
  • Adiabatic: no heat; expansion cools, compression heats; the adiabat is steeper than the isotherm.
  • Isobaric work is PΔV; isochoric work is zero.
  • For the same expansion from one state: isobaric work > isothermal > adiabatic.
  • In a cycle ΔU = 0 and the enclosed area is the net work; natural processes are irreversible.
Read the full lesson

Lesson 5

Second law of thermodynamics, heat engines, the Carnot engine and the refrigerator

Energy flow in a heat engine

  1. Hot reservoir at T_H Supplies heat Q_H to the working substance.
  2. Working substance in a cycle Converts part of Q_H into work W = Q_H − Q_L.
  3. Cold reservoir at T_L Receives the rejected heat Q_L.

Clausius: heat flows by itself only from hot to cold. Kelvin-Planck: no cyclic engine turns heat wholly into work. Engine: η = 1 − Q_L/Q_H; Carnot: η = 1 − T_L/T_H. Refrigerator: β = Q_L/W = T_L/(T_H − T_L) (ideal). Natural processes increase entropy.

  • The second law gives the direction of natural processes, which the first law cannot.
  • A heat engine needs a source and a sink; some heat is always rejected.
  • The Carnot cycle is two isotherms and two adiabats; η = 1 − T_L/T_H is the upper limit for any engine.
  • Entropy increases in all natural processes and is unchanged in reversible ones.
  • A refrigerator moves heat from cold to hot using work; β = Q_L/W.
Read the full lesson

Privacy · Terms · Refunds · Delivery