• Practice
  • About 26 min
  • 5 practice questions

Thermodynamic processes: isothermal, adiabatic, isobaric, isochoric and cyclic

Write the equation of state, PV diagram, work and first-law form for isothermal, adiabatic, isobaric and isochoric processes, find net work in a cycle, and tell reversible from irreversible processes.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Derive W = μRT ln(V_f/V_i) for an isothermal process.
  • Use PV^γ = constant and TV^(γ−1) = constant, and derive W = μR(T_i − T_f)/(γ − 1) for an adiabatic process.
  • Handle isobaric (W = PΔV) and isochoric (W = 0) processes.
  • Find the net work in a cyclic process from the enclosed area and its direction.
  • State the limits of the first law and the conditions for a reversible process.

A gas can go from one state to another in many ways. Four simple processes, each with one quantity held fixed, explain engines, pumps, pressure cookers and even clouds. In each, apply the ideal gas law and the first law ΔU = Q − W.

Isothermal process (T constant)

In an isothermal process the temperature stays constant while P and V change. From PV = μRT, PV = constant, so P₁V₁ = P₂V₂ and the PV graph, an isotherm, is a hyperbola. For an ideal gas U depends only on T, so ΔU = 0 and the first law gives Q = W: all the heat supplied is used to do work, and the temperature does not rise even though heat flows in. In an isothermal compression the work done on the gas leaves as heat through the walls. Examples: boiling water at 100 °C and melting ice at 0 °C (the temperature stays fixed during the change of state), and biological processes at a steady body temperature of 37 °C. Of two isotherms on one diagram, the one farther from the origin is at the higher temperature (at the same pressure it has the larger volume).

Work. For a quasi-static isothermal change, P = μRT/V at every stage, so W = ∫ (μRT/V) dV from V_i to V_f = μRT ∫ dV/V = μRT ln(V_f/V_i). For expansion V_f > V_i, the logarithm is positive and W > 0; for compression it is negative. Although derived for a quasi-static process, the result depends only on the end states.

Worked example 1: isothermal expansion

2.0 mol of ideal gas at 300 K expands isothermally from 10 L to 30 L (R = 8.314 J mol⁻¹ K⁻¹). Work: W = μRT ln 3 = 2.0 × 8.314 × 300 × 1.099 = 4988 × 1.099 = 5.48 × 10³ J. Heat: Q = W = 5.48 kJ, flowing in. Pressures: P_i = μRT/V_i = 4988/0.010 = 4.99 × 10⁵ Pa, and P_f = P_i V_i/V_f = 4.99 × 10⁵/3 = 1.66 × 10⁵ Pa.

Adiabatic process (Q = 0)

In an adiabatic process no heat enters or leaves, so ΔU = −W: a gas that expands does work at the cost of its internal energy and cools; a gas compressed has work done on it and warms. It happens either when the system is thermally insulated, or when the change is so fast that there is no time for heat to flow: a bursting tyre, the rapid compression or expansion of a gas, or warm moist air rising, expanding and cooling until its water vapour condenses into a cloud.

The adiabatic equation of state is PV^γ = constant (P_iV_i^γ = P_fV_f^γ), with γ = C_p/C_v. Substituting P = μRT/V gives TV^(γ−1) = constant, so T_iV_i^(γ−1) = T_fV_f^(γ−1); also T^γ P^(1−γ) = constant. Since γ > 1, an adiabat is steeper than an isotherm through the same point. Rapid compression heats air strongly: in a diesel engine, air alone is compressed so much and so fast that its temperature exceeds the ignition point of the diesel fuel sprayed into it, so the fuel ignites without a spark.

Work. With P = constant/V^γ: W = ∫ constant × V^(−γ) dV from V_i to V_f = constant × [V^(1−γ)/(1 − γ)] = (P_iV_i − P_fV_f)/(γ − 1), using constant = P_iV_i^γ = P_fV_f^γ. With PV = μRT: W = μR(T_i − T_f)/(γ − 1). In expansion T_f < T_i and W > 0 (the gas cools); in compression W < 0 (the gas warms).

Worked example 2: a blocked pump and an adiabatic expansion

(a) Air (γ = 1.4) at 27 °C in a pump with a blocked nozzle is pushed quickly to one-tenth of its volume. T_f = T_i(V_i/V_f)^(γ−1) = 300 × 10^0.4 = 300 × 2.512 = 754 K, about 481 °C, which is why such compressions can be dangerous. (b) One mole of a monatomic gas (γ = 5/3) expands adiabatically and its temperature falls from 400 K to 300 K. W = μR(T_i − T_f)/(γ − 1) = 1 × 8.314 × 100/(2/3) = 831.4 × 1.5 = 1.25 × 10³ J, done by the gas out of its internal energy.

Isobaric process (P constant)

In an isobaric process the pressure is constant while V, T and U change. From V = (μR/P)T, V ∝ T (V_i/T_i = V_f/T_f), so the V-T graph is a straight line through the origin, steeper for a lower pressure. On a PV diagram it is a horizontal line. Work: W = P ∫dV = P(V_f − V_i) = PΔV = μR(T_f − T_i), positive in expansion and negative in compression. First law: ΔU = Q − PΔV. Examples: a gas pushing a freely moving weighted piston, and cooking in an open vessel at atmospheric pressure.

Isochoric process (V constant)

In an isochoric process the volume is constant. From P = (μR/V)T, P ∝ T (P_i/T_i = P_f/T_f), the P-T graph is a straight line through the origin, and the PV graph is a vertical line. Since ΔV = 0, W = 0 and ΔU = Q: all the heat goes into internal energy, raising both T and P (or, if heat leaves, both fall). Example: food cooked in a closed vessel, where the rising steam pressure eventually lifts the lid. A petrol engine's cycle is two adiabatic strokes (compression and expansion) joined by two isochoric steps (heat added and heat rejected at constant volume).

Summary of the four processes for an ideal gas
ProcessFixedEquation of stateWork done by gasFirst law
IsothermalTPV = constantμRT ln(V_f/V_i)ΔU = 0, Q = W
AdiabaticQ = 0PV^γ = constantμR(T_i − T_f)/(γ − 1)ΔU = −W
IsobaricPV/T = constantP(V_f − V_i)ΔU = Q − PΔV
IsochoricVP/T = constant0ΔU = Q

Worked example 3: three ways to double the volume

One mole of a monatomic ideal gas (γ = 5/3) at 300 K and 1.0 MPa doubles its volume. Isobaric: W = μRΔT; at constant P, doubling V doubles T to 600 K, so W = 8.314 × 300 = 2.49 kJ. Isothermal: W = μRT ln 2 = 8.314 × 300 × 0.693 = 1.73 kJ. Adiabatic: T_f = 300 × (1/2)^(2/3) = 300 × 0.630 = 189 K, so W = 8.314 × (300 − 189)/(2/3) = 8.314 × 111 × 1.5 = 1.38 kJ. Work is greatest for the isobaric expansion and least for the adiabatic one, matching the areas under the three curves on a PV diagram, which start from the same point and fall progressively more steeply.

Cyclic processes

In a cyclic process the system returns to its initial state, so ΔU = 0 and the net heat taken in equals the net work done: Q_net = Q_in − Q_out = W. On a PV diagram a cycle is a closed loop. The work done by the gas in the expansion is the area under the upper path; the work done on it in the compression is the area under the lower path; the net work is the area enclosed by the loop. It is positive when the cycle runs clockwise (the system does net work) and negative when anticlockwise (net work is done on the system).

Worked example 4: a rectangular cycle

A gas goes round a rectangle on the PV diagram between P = 1.0 × 10⁵ Pa and 3.0 × 10⁵ Pa and V = 1.0 L and 4.0 L, expanding at the higher pressure (clockwise). Expansion work = 3.0 × 10⁵ × 3.0 × 10⁻³ = 900 J; compression work = −1.0 × 10⁵ × 3.0 × 10⁻³ = −300 J. Net work = 900 − 300 = 600 J = (2.0 × 10⁵ Pa) × (3.0 × 10⁻³ m³), the area of the rectangle.

Limits of the first law; reversible and irreversible processes

The first law conserves energy but says nothing about direction. It would allow heat to flow from a cold body to a hot one, or the heat produced by a car's brakes to turn back into the car's motion; neither ever happens. A process is reversible if it can be retraced so that the system and the surroundings pass back through the same states. Conditions: it must be extremely slow (quasi-static); the system must stay in mechanical, thermal and chemical equilibrium with the surroundings throughout; and there must be no dissipative effects such as friction, viscosity or electrical resistance. Examples: a slow, frictionless isothermal expansion, or the slow compression and release of a spring. All reversible processes are quasi-static, but a quasi-static process with friction is not reversible. All natural processes are irreversible, and they cannot be drawn on a PV diagram because P and T have no single values during them.

Isothermal: PV = const, W = μRT ln(V_f/V_i), Q = W. Adiabatic: PV^γ = const, TV^(γ−1) = const, W = μR(T_i − T_f)/(γ − 1). Isobaric: W = PΔV. Isochoric: W = 0, ΔU = Q. Cycle: ΔU = 0, W = enclosed area (clockwise +).

Key takeaways

  • Isothermal: ideal-gas internal energy constant, so heat in equals work out.
  • Adiabatic: no heat; expansion cools, compression heats; the adiabat is steeper than the isotherm.
  • Isobaric work is PΔV; isochoric work is zero.
  • For the same expansion from one state: isobaric work > isothermal > adiabatic.
  • In a cycle ΔU = 0 and the enclosed area is the net work; natural processes are irreversible.

Check your understanding

  1. 1. For an ideal gas undergoing an isothermal expansion:

    1. Q = 0 and ΔU = −W
    2. W = 0 and ΔU = Q
    3. ΔU = Q + W
    4. ΔU = 0 and Q = W
    Show answer

    Answer: D. The internal energy of an ideal gas depends only on its temperature, which is constant. So ΔU = 0 and the first law gives Q = W: all the heat absorbed is used to do work.

  2. 2. In an adiabatic process:

    1. the temperature cannot change
    2. no heat is exchanged, so ΔU = −W
    3. the pressure stays constant
    4. no work is done
    Show answer

    Answer: B. Adiabatic means Q = 0. Then ΔU = Q − W = −W: the internal energy (and temperature) falls when the gas does work in expansion and rises when work is done on it.

  3. 3. A gas goes clockwise round a rectangle on a PV diagram whose sides are 2.0 × 10⁵ Pa (pressure difference) and 2.0 × 10⁻³ m³ (volume difference). The net work done by the gas per cycle is:

    1. −400 J
    2. 4.0 × 10⁸ J
    3. 400 J
    4. zero
    Show answer

    Answer: C. Net work = enclosed area = 2.0 × 10⁵ × 2.0 × 10⁻³ = 400 J. A clockwise cycle means the gas does net work, so it is +400 J.

  4. 4. When a bicycle tyre bursts suddenly, the expansion of the air inside is approximately:

    1. adiabatic
    2. isothermal
    3. isochoric
    4. isobaric
    Show answer

    Answer: A. The expansion is so quick that there is no time for heat to flow in or out, so Q ≈ 0: an adiabatic expansion. The escaping air cools noticeably.

  5. 5. In an isochoric process, which quantity is zero?

    1. The heat supplied
    2. The work done by the gas
    3. The change in temperature
    4. The change in internal energy
    Show answer

    Answer: B. The volume does not change, so W = ∫P dV = 0. Then ΔU = Q: any heat supplied changes the internal energy, temperature and pressure.

Privacy · Terms · Refunds · Delivery