- Practice
- About 18 min
- 5 practice questions
Crossing over, recombination frequency and genetic mapping
Describe the stages of crossing over in meiosis, calculate recombination frequency, convert it to map units (centimorgans) and use distances between genes to work out gene order on a linkage map.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe synapsis, tetrad formation, chiasma formation and terminalisation.
- State the importance of crossing over.
- Calculate recombination frequency (RF) and express it in centimorgans.
- Arrange genes on a map from pairwise distances.
If linked genes always stayed together, recombinants would never appear. They do appear, because homologous chromosomes swap pieces during meiosis. Measuring how often they swap lets us draw maps of genes along chromosomes - an idea first developed by Morgan's student Alfred H. Sturtevant in 1913.
What crossing over is
Crossing over is the exchange of corresponding segments between non-sister chromatids of a homologous pair, producing new combinations of genes. Morgan coined the term in 1912. It happens in pachytene of prophase I of meiosis in germ cells (meiotic or germinal crossing over). Rarely it happens in somatic cells during mitosis (somatic or mitotic crossing over).
Mechanism of crossing over
- Synapsis (zygotene) Homologues pair to form bivalents; procentric, proterminal or random
- Tetrad formation Each homologue shows two sister chromatids: four chromatids per bivalent
- Crossing over (pachytene) Non-sister chromatids touch at chiasmata, break and rejoin, exchanging equal segments
- Terminalisation Chiasmata slide towards the chromosome ends; homologues separate
Synapsis is held by the synaptonemal complex, and recombination nodules mark the sites of exchange. Where two non-sister chromatids cross, an X-shaped chiasma (plural chiasmata) is seen.
Importance of crossing over
- It creates new gene combinations, which matter in evolution.
- It shows that genes are arranged linearly on chromosomes.
- Its frequency is the basis of genetic maps.
- It helps us understand gene action, and useful new combinations can be used in plant breeding.
The products carrying new combinations are recombinants, and the breaking and rejoining of DNA that makes them is recombination.
Recombination frequency
RF (%) = (number of recombinant offspring ÷ total offspring) × 100. 1% RF = 1 map unit = 1 centimorgan (cM); 100 cM = 1 Morgan.
The diagram showing the order of genes and the distances between them is a genetic (linkage) map. Distance is directly proportional to recombination frequency, because genes farther apart have more room for a crossover between them. The unit is the map unit (m.u.) or centimorgan (cM), named after Morgan. For example, 3.5 map units = 3.5 cM = 3.5% = 0.035 recombination frequency. Maps are used to find gene order and loci, measure distances, and predict results of dihybrid and trihybrid crosses.
Worked example 1: calculating RF
A test cross gives 410 + 390 parental and 95 + 105 recombinant offspring (made-up data). Find RF and map distance. Working: recombinants = 95 + 105 = 200; total = 410 + 390 + 200 = 1000. RF = 200 ÷ 1000 × 100 = 20%. Distance = 20 cM. Check: parental total 800 is 80%, and 80 + 20 = 100.
Worked example 2: ordering three genes
Recombination frequencies (made-up) are A-B 8%, B-C 5%, A-C 13%. Find the gene order. Working: the largest distance (A-C, 13) must span the other two. Test: A-B + B-C = 8 + 5 = 13 = A-C, so B lies between A and C. Order: A - B - C, with A-B 8 cM and B-C 5 cM.
| Pair | RF | Map distance |
|---|---|---|
| A-B | 8% | 8 cM |
| B-C | 5% | 5 cM |
| A-C | 13% | 13 cM |
Worked example 3: reading a map
A textbook-style map shows A - B 3.5 cM, B - C 7.5 cM, C - D 5.5 cM. What is the expected RF between B and D, and between A and D? Working: B to D = 7.5 + 5.5 = 13 cM, so about 13%. A to D = 3.5 + 7.5 + 5.5 = 16.5 cM, about 16.5%. (For very distant genes, double crossovers make measured RF smaller than the sum, and RF never exceeds 50%.)
Key takeaways: crossing over occurs between non-sister chromatids at chiasmata in pachytene, after synapsis and tetrad formation, followed by terminalisation; RF = recombinants ÷ total × 100; 1% RF = 1 cM; distances add up along a chromosome, so the largest distance identifies the outer genes.
Check your understanding
-
1. At which stage of meiosis does crossing over take place?
- Pachytene of prophase I
- Zygotene of prophase I
- Metaphase I
- Anaphase II
Show answer
Answer: A. Pairing (synapsis) begins in zygotene, but the actual exchange between non-sister chromatids at chiasmata happens in pachytene.
-
2. A test cross gives 180 recombinants out of 1200 offspring. The distance between the genes is:
- 18 cM
- 12 cM
- 15 cM
- 1.5 cM
Show answer
Answer: C. RF = 180 ÷ 1200 × 100 = 15%. One per cent recombination equals one centimorgan, so the distance is 15 cM.
-
3. Crossing over occurs between:
- sister chromatids of one chromosome
- non-sister chromatids of homologous chromosomes
- non-homologous chromosomes
- chromatids of different cells
Show answer
Answer: B. Crossing over exchanges segments between non-sister chromatids of a homologous pair. Exchange between non-homologous chromosomes is translocation, a mutation.
-
4. RF values: P-Q 12%, Q-R 4%, P-R 8%. The gene order is:
- P - Q - R
- Q - P - R
- R - P - Q
- P - R - Q
Show answer
Answer: D. The largest distance (P-Q = 12) spans the other two: P-R + R-Q = 8 + 4 = 12. So R lies between P and Q.
-
5. The movement of chiasmata towards the ends of chromatids after crossing over is called:
- terminalisation
- synapsis
- tetrad formation
- recombination
Show answer
Answer: A. After exchange, chiasmata move towards the chromosome ends (terminalisation), allowing homologues to separate completely.
Sign in to keep track of the lessons you finish.